Mite transmission hung in 1st gear
-
- G-Sergeant
- Posts: 30
- Joined: Mon Feb 03, 2014 3:42 am
- Location: Middle Georgia
Mite transmission hung in 1st gear
I am having trouble with my M422’s transmission. It is hung in 1st gear. Gear shift lever moves freely. I can crank it with the clutch in with no problem. I searched the forum and could not find an answer. I am not a transmission person, so any help or suggestions would be appreciated.
-
- G-Sergeant
- Posts: 43
- Joined: Tue Nov 10, 2015 12:04 pm
- Location: Louisiana
Re: Mite transmission hung in 1st gear
Never messed with a mite before but if the trans is anything like a m151's then I would first guess that the end of the shift lever has jumped out of linkage. Does it move a lot more freely than before?
1960 M151 Run #1 (Now runs and stops but still working on it...)
-
- G-Sergeant
- Posts: 30
- Joined: Mon Feb 03, 2014 3:42 am
- Location: Middle Georgia
Re: Mite transmission hung in 1st gear
Surveyor wrote:Never messed with a mite before but if the trans is anything like a m151's then I would first guess that the end of the shift lever has jumped out of linkage. Does it move a lot more freely than before?
No it shifts about the same, not freely moving.
- Bill H.
- G Moderator
- Posts: 6256
- Joined: Sun May 31, 1998 8:00 pm
- Location: Yonna Valley, Oregon
Re: Mite transmission hung in 1st gear
Pull the hump and cover. It may have broke the fork or the the shifter end came out of the bracket for the shift forks.
Bill H.
"Each shall seek his own kind, in other words, a bird may love a fish but where would they build a home together?" Tevye, Fiddler on the Roof
1952 Dunbar Kapple M100
1953 Willys M38A1
1962 AMC M422A1
1965 Stevens M416B1 X 2
1967 Kaiser M715
2 Timothy 3:1-5
"Each shall seek his own kind, in other words, a bird may love a fish but where would they build a home together?" Tevye, Fiddler on the Roof
1952 Dunbar Kapple M100
1953 Willys M38A1
1962 AMC M422A1
1965 Stevens M416B1 X 2
1967 Kaiser M715
2 Timothy 3:1-5
-
- G-Staff Sergeant
- Posts: 64
- Joined: Sat Jun 03, 2017 8:34 pm
- Location: Modesto, Ca
Re: Mite transmission hung in 1st gear
As near as I can tell from the pictures in the service manual you either have a broken shift fork or the roll pin that connects the shift fork to the shift rail has either broken or come out.
The Transmission/transfercase manual can be seen TM9-2520-237-35 pages 4-6. It can be downloaded from the link in this forum or from M422A1.com.
Best of luck!!
Ed
The Transmission/transfercase manual can be seen TM9-2520-237-35 pages 4-6. It can be downloaded from the link in this forum or from M422A1.com.
Best of luck!!
Ed
Who is online
Users browsing this forum: No registered users and 41 guests