MB 217454
-
- Sergeant Major of the Gee
- Posts: 360
- Joined: Sun Dec 05, 2010 12:10 am
- Location:
Re: MB 217454
The stripping process is great as the photos show,However be careful with tubing and hat channels.If not completely drained and dry they can bleed out and ruin your paint.
Locally we have a company called Redi-Strip.I believe they are a chain operation.
Bob
Locally we have a company called Redi-Strip.I believe they are a chain operation.
Bob
-
- G-Colonel
- Posts: 1649
- Joined: Mon Jul 09, 2007 2:17 pm
- Location: Florence,Kentucky
- Contact:
Re: MB 217454
Hi Bob,
The guy who ran this stripping outfit told me that the heat process-almost 900 degree F-leaves the piece desert dry.The leaking issues were with eliminated with this pyro process...sort of like the self-cleaning ovens.With that kind of heat,no wood can survive,so floor hat channel,rear panel hat,and fender brace wood must be removed prior to the process.A down side,this,besides the price.
The guy who ran this stripping outfit told me that the heat process-almost 900 degree F-leaves the piece desert dry.The leaking issues were with eliminated with this pyro process...sort of like the self-cleaning ovens.With that kind of heat,no wood can survive,so floor hat channel,rear panel hat,and fender brace wood must be removed prior to the process.A down side,this,besides the price.
Ralph
-
- G-Major General
- Posts: 3180
- Joined: Sat Jul 24, 2010 9:49 pm
- Location: Magnolia, Texas
- Contact:
Re: MB 217454
Coming along very nice Ralph. This is the fun stuff, putting it back together and then the really fun stuff like stenciling etc.
-
- G-Colonel
- Posts: 1649
- Joined: Mon Jul 09, 2007 2:17 pm
- Location: Florence,Kentucky
- Contact:
Re: MB 217454
Rodney,Hi...
Yes it a treat at this point-am ready to add a ton of pics to bring this thread up to date after some computer issues are resolved.Hope it finishes as nicely as yours did...IMO yours was the most determined resto ever.
Yes it a treat at this point-am ready to add a ton of pics to bring this thread up to date after some computer issues are resolved.Hope it finishes as nicely as yours did...IMO yours was the most determined resto ever.
Ralph
-
- G-Major General
- Posts: 3180
- Joined: Sat Jul 24, 2010 9:49 pm
- Location: Magnolia, Texas
- Contact:
Re: MB 217454
What a compliment Ralph!
Thank you very, very much! That means a lot. I hope my thread has helped others.
Thank you very, very much! That means a lot. I hope my thread has helped others.
-
- G-Colonel
- Posts: 1649
- Joined: Mon Jul 09, 2007 2:17 pm
- Location: Florence,Kentucky
- Contact:
Re: MB 217454
To add a little about the tub sheet metal resto...after it was back to bare sheet ,it was into Todd's garage.A first rate G503 tech- and generous friend.He did the sheet metal and I helped.
The front floor & hat channels were rotten,as was the driver's side panel from the center of the tool detents back.The floor riser was 1/3rd gone.Later we decided that the rear floor was too pin-holed overall to stay.Many extra holes everywhere,some braces and cowl pillars were also rotted.And more.
The front floor & hat channels were rotten,as was the driver's side panel from the center of the tool detents back.The floor riser was 1/3rd gone.Later we decided that the rear floor was too pin-holed overall to stay.Many extra holes everywhere,some braces and cowl pillars were also rotted.And more.
Ralph
-
- G-Colonel
- Posts: 1649
- Joined: Mon Jul 09, 2007 2:17 pm
- Location: Florence,Kentucky
- Contact:
Re: MB 217454
Here are a few more pics from before we started to show the overall repairs needed.At least we could reuse the front floor transmission tunnel.
Ralph
-
- G-Colonel
- Posts: 1649
- Joined: Mon Jul 09, 2007 2:17 pm
- Location: Florence,Kentucky
- Contact:
Re: MB 217454
Before starting floor replacement,we removed the driver's side panel from center tool indent to the rear panel.Drilling out many spot welds...Todd fabricated the forward slope of the driver's side wheelhouse.That work,along with the new side pane,kept the tub square for the new floor fit.
Ralph
-
- G-Colonel
- Posts: 1409
- Joined: Sat Oct 22, 2011 7:41 pm
- Location: Orinda, California
Re: MB 217454
Wow Ralph, lots of great metal work going on there, you really are bringing that tub back to top shape. Looks like you and your colleague are going to fabricate most of the sheet metal rather than use aftermarket patch panels? Or did you do both?
1943 MB 213301 DOD 2-22-43
-
- G-Colonel
- Posts: 1649
- Joined: Mon Jul 09, 2007 2:17 pm
- Location: Florence,Kentucky
- Contact:
Re: MB 217454
Thanks Paul.Todd is very good as you will see.But in order to minimize his shop time,I bought whatever pieces I could.The wheelhouse slope was an easy one for him.Though we were glad to have repro panels,we found, like so many others, how they had to be talked into fitting...neither offshore or US made sheet metal that we used was completely correct,relative to original pieces.Ron of course worked with us very well on this,but to some degree,we came to view repro sheet metal parts as billets...
I'll be putting more up shortly but wanted to answer your question.
I'll be putting more up shortly but wanted to answer your question.
Ralph
-
- G-Colonel
- Posts: 1649
- Joined: Mon Jul 09, 2007 2:17 pm
- Location: Florence,Kentucky
- Contact:
Re: MB 217454
Finish shot of wheelhouse slope...
The driver's side panel & brace next-after re-working its corner radius-this panel's axe sheath was a little shallow,and the tool indents were as well...
The driver's side panel & brace next-after re-working its corner radius-this panel's axe sheath was a little shallow,and the tool indents were as well...
Ralph
-
- G-Colonel
- Posts: 1649
- Joined: Mon Jul 09, 2007 2:17 pm
- Location: Florence,Kentucky
- Contact:
Re: MB 217454
Bottom of DS repaired wheelhouse panel to the stable section to the new side panel
Side to rear panel with repaired area...
A start on joining the side quarters
Side to rear panel with repaired area...
A start on joining the side quarters
Ralph
- hell-fire
- G-Major General
- Posts: 3443
- Joined: Tue Oct 02, 2007 4:06 am
- Location:
Re: MB 217454
Really nice work ralph, nearly as much as I had to do with the tub on my Jeep, see it here you may be interested.
Will be watching the work you are doing with interest.
Will be watching the work you are doing with interest.
John
Australia
Member VMVC #192
1942 Willys MB-BRT 135673 D.O.D. 4-16-42 Now 97% finished
Australia
Member VMVC #192
1942 Willys MB-BRT 135673 D.O.D. 4-16-42 Now 97% finished
-
- G-Colonel
- Posts: 1649
- Joined: Mon Jul 09, 2007 2:17 pm
- Location: Florence,Kentucky
- Contact:
Re: MB 217454
Getting the Driver side panel into place and tacking an angle across the door openings to keep her square.
Going forward on both sides,step and pillar repair
The finished DS
Going forward on both sides,step and pillar repair
The finished DS
Ralph
-
- G-Colonel
- Posts: 1409
- Joined: Sat Oct 22, 2011 7:41 pm
- Location: Orinda, California
Re: MB 217454
That driver's side is looking really nice Ralph. Well done. I've just fiinished building a rotisserie so I can mount the MB tub, so I'm going through these recent posts with even more interest. Photos like this and those in John's outstanding thread linked to above are great to look through while tearing into these tubs. Much thanks
1943 MB 213301 DOD 2-22-43
Who is online
Users browsing this forum: twinflyer17 and 67 guests