Page 2 of 4

Re: Project "Bam Bam"

Posted: Sun Jun 24, 2012 9:53 am
by jpet
1943gpw wc53 wrote:?.......Hey did you ever make some top bows or will you do those later?
. I have made a fixture for bending top bows. I'll bring you some in CO. Hey didn't I see in your pics that one or more of your jeeps has bows? What is the inside radius of them?
F Bill wrote:You need to modify that first picture in the thread and remove that ax murderer guy standing to your right.. He is just plain scary looking! .....
Hey, don't be talking about my friend like that! :lol: That guy gives me combat wheels :D
....I see Ron has the Gussets on sale for $15 apiece.. He is probably selling them all off before jpet corners the market on frame repair parts... :lol: :lol: :lol:
I hope not. I'm not going to start producing them, especially since like you said, you can buy them from Ron Fitzpatrick for $15. I'm just having some fun. I don't like producing parts to sell unless it is a part that nobody else makes. CJ bows, canvas window frames, stuff like that.

Re: Project "Bam Bam"

Posted: Sun Jun 24, 2012 5:04 pm
by 1943gpw wc53
Easy came with top bows when I bought him, but they are from an m38/A1 so they don't work :roll:

Re: Project "Bam Bam"

Posted: Mon Jun 25, 2012 5:36 am
by jpet
Image

Re: Project "Bam Bam"

Posted: Mon Jun 25, 2012 5:07 pm
by jpet
Front bumper:

Image

12 gauge steel. For this bad boy, I had to get some help.

drill holes....

Image

.... then I made a fixture to put bend the bevels on the ends:

Image

Image

Image

now I have what I need to align and attach the front gussets. Now before you say it... yes, I do know that you can buy this bumper from Ron for 60 bucks. :D Probably would be the smart thing to do but not on this project.

For the dimensions, I used a drawing of a CJ2A bumper from the 2A page except, the material thickness is 12 gauge, the flanges are 1-1/2" wide, and omit all the holes in the face other than the crank hole.

http://www.thecj2apage.com/forums/front ... html#45820

Looks like I screwed up. I'll have to weld up those two 1/2" holes I put in the face :oops:

Re: Project "Bam Bam"

Posted: Tue Jun 26, 2012 3:19 am
by jpet
Test fit of the new front end:

Image

Image

Re: Project "Bam Bam"

Posted: Wed Jun 27, 2012 9:21 pm
by thidisbogus
Outstanding work

Re: Project "Bam Bam"

Posted: Wed Jun 27, 2012 11:51 pm
by pj128
I wish you were my neighbor 8)
Phil

Re: Project "Bam Bam"

Posted: Fri Jul 06, 2012 1:53 pm
by jpet
Rivets:

I made a tool to squeeze the rivets using the guys from Iceland posted.

http://www.g503.com/forums/viewtopic.php?f=4&t=177497

In Viking's example, they are doing GPW rivets. The MB rivets are not as easy to do because they are harder to get to. The frame is boxed in at the frame horns where a GPW is not. Anywho ....

Image

I used a similar design but I had to make the throat bigger and the "C" clamp narrower in some areas so that it could get to all the rivets. This one has to reach 4" where Viking's reaches in 3" This one is not as strong, but I had no choice given the areas I had to reach.

Anvil:

Image

Image

This material is 1" thick but I added some reinforcement where I thought it might be week.

Image

I used a 10 ton porta-power to do the squeezing:

Image

I could not buy rivets that matched the head on my MB so I made some that look correct to me:

Image

As you can see, the MB rivets are harder to get to than the GPW in Viking's video:

Image

In fact, If you look at the above photo, you will see I had to cut some more out of the "C" clamp with a torch.

But ..... I think they turned out ok:

Image

Image

Image

Not saying that they are correct, Just saying that they look like the other rivets in the frame:

Image

Image

A few blemishes but the rivets that were in the frame weren't perfect either.

Image

Anywho, I'm not trying to fool anyone, They are what they are.

I did not post all of the failures but I did them similar to Viking's video. This was a two man operation. We heated them up till they glowed darn near yellow, Then guy 1 dropped the rivet in the hole while guy 2 quickly put the clamp into position. Guy one worked the pump. We had a couple bad ones but the more we did, the better we got and at the end, we had no problem with the process. Just have to be fast. I found that leaving 3/8" excess rivet gave me the look you see in my pics. As I said earlier, this "C" clamp is not as strong but I had no problem as long as we were fast. Once again .... spent all day on the jig and a couple hours installing rivets. :D I need to make another anvil to do the flat rivets in the rear but now my confidence is high. Thanks to Viking27 and the guys who participated in the video and thread!

Re: Project "Bam Bam"

Posted: Sun Jul 08, 2012 10:03 am
by Ray Fernandez
Super nice work Jeff. Hey, are we going to see this project in rolling/running form at the Fall Colors run this year?????

Ray

Re: Project "Bam Bam"

Posted: Tue Jul 10, 2012 2:38 am
by hell-fire
Fantastic work mate, it was a lucky day for "Bam Bam" when you came along, looking forward to the rest of this, will be watching closely.

Re: Project "Bam Bam"

Posted: Tue Jul 10, 2012 4:04 am
by jpet
Ray Fernandez wrote:Super nice work Jeff. Hey, are we going to see this project in rolling/running form at the Fall Colors run this year?????
At the rate I'm going, maybe not. Even if I pushed it to get finished, I'd hate take an unproven jeep out there, have a break down and end up a passenger for the week when Gen'l Willys has already proven himself. We shall see.

Re: Project "Bam Bam"

Posted: Thu Jul 19, 2012 5:48 pm
by jpet
II haven't posted recently because all I've been doing is some boring cleaning :? .... but for the record, Bam Bam's frame is ready for the sand blaster along with the combat wheels. Once again, GW and Shadow are doing their part for the project:

Image

Image

... I have just been disassembling the axles for now. I want to take it all to the sand blaser at once.

Pressed out the seals and races:

Image

found some nice OD paint.

Image

Rear axle:

Image

Looks like the wheel bearing inner races have been spinning on the spindles:

Image

Popped the carrier out. The ring and pinion look good and it feels like the backlash is within .010 but I'll check it with an indicator when I reassemble it.

Image

I'll have to rig up a tool to pull the inner seals. Can anyone tell me why those seals are necessary?

Image

Notice the inside of the hogs head is painted. So is the carrier.

Image

Anywho....

Image

Gotta pull the seals and races for the pinion bearings then I can finish taking apart the front axle, and then I can take this all to the sand blaster...... and then I can really start spending the money :?

If anyone is keeping records, the assembly stamp date on both axles is 4-8-45:

Image

Ill have to tell the sand blaster guy to stay clear of those. Sorry I did not take better pics. Kinda messy for a camera. When I put it back together, I will take more detailed pics and document it best that I can. I may have to take a break from Bam Bam to clean out the barn so I have room to work. :D

Thanks for reading :)

Re: Project "Bam Bam"

Posted: Fri Aug 03, 2012 7:46 am
by jpet
Sandblasted, primed and painted:
Image

Image

Image

Image

Image

Gonna let this stuff set and cure for a while. Thanks for reading :)

Re: Project "Bam Bam"

Posted: Fri Aug 03, 2012 9:41 am
by 1943gpw wc53
Looking good Jeff!!! Will it be ready for the fall tour? Also what color paint did you use? I like it :)

Re: Project "Bam Bam"

Posted: Fri Aug 03, 2012 10:48 am
by jpet
1943gpw wc53 wrote:Looking good Jeff!!! Will it be ready for the fall tour? ....
No it's not going to be ready and in fact, I am going to have to shelf this project for a little while so that I can get GW ready for the FCT. I still have to fix all the stuff I broke last year! :D
....Also what color paint did you use? I like it :)
It's 33070 I got it from Ron.