For Sale VEP Ford Inlet Manifold...GPW-9425 script "f" cast into manifold...no cast bosses on the manifold...take off condition
One drawback...someone drilled, tapped and installed a bolt on the one side of the manifold. It has been there a long time. Probably could be cut off and ground flush to the manifold or completely remove bolt and then weld the hole shut. Dont know if welding is at all possible, as I am not a welder, just throwing it out there.
Price is $150.00 plus shipping. SOLD Thanks Dirk Email directly if interested...cwirishbrigade@verizon.net THANKS FOR LOOKING!!!
FS VEP GPW Inlet Manifold SOLD
-
- G-Colonel
- Posts: 1276
- Joined: Tue Jan 04, 2005 7:14 pm
- Location: Allentown, PA
FS VEP GPW Inlet Manifold SOLD
Last edited by Michael J. Boyle on Sat Nov 30, 2013 6:15 am, edited 1 time in total.
EX-MVPA #28445
41 Willys MB I0II93 slat grill
the "Phoenix"--rising out of the ashes...
Welbike Parascooter Mark I #798
BSA Folding Para Bicycle R38199
"For those who fought for it...Freedom has a taste the protected will never know"
41 Willys MB I0II93 slat grill
the "Phoenix"--rising out of the ashes...
Welbike Parascooter Mark I #798
BSA Folding Para Bicycle R38199
"For those who fought for it...Freedom has a taste the protected will never know"
- lt.luke
- G-General
- Posts: 9899
- Joined: Fri May 09, 2003 7:56 am
- Location: Oklahoma
- Contact:
Re: FS VEP GPW Inlet Manifold
You don't have the exhaust side, do you?
Luke Sparks
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
-
- G-Colonel
- Posts: 1276
- Joined: Tue Jan 04, 2005 7:14 pm
- Location: Allentown, PA
Re: FS VEP GPW Inlet Manifold
I have an interested buyer, with others on the list. I will not consider it sold until I have a commitment to buy. Should anyone decide they do not want the item due to shipping costs or whatever, I will move on to the next prospective buyer based on the time stamp of their email. Thanks to all who are interested.
EX-MVPA #28445
41 Willys MB I0II93 slat grill
the "Phoenix"--rising out of the ashes...
Welbike Parascooter Mark I #798
BSA Folding Para Bicycle R38199
"For those who fought for it...Freedom has a taste the protected will never know"
41 Willys MB I0II93 slat grill
the "Phoenix"--rising out of the ashes...
Welbike Parascooter Mark I #798
BSA Folding Para Bicycle R38199
"For those who fought for it...Freedom has a taste the protected will never know"
-
- G-Colonel
- Posts: 1276
- Joined: Tue Jan 04, 2005 7:14 pm
- Location: Allentown, PA
Re: FS VEP GPW Inlet Manifold
You don't have the exhaust side, do you?
Luke,
I do have an exhaust manifold, but I am pretty sure it is an MB type. I will have to take a look and will let you know.
Mike
Luke,
I do have an exhaust manifold, but I am pretty sure it is an MB type. I will have to take a look and will let you know.
Mike
EX-MVPA #28445
41 Willys MB I0II93 slat grill
the "Phoenix"--rising out of the ashes...
Welbike Parascooter Mark I #798
BSA Folding Para Bicycle R38199
"For those who fought for it...Freedom has a taste the protected will never know"
41 Willys MB I0II93 slat grill
the "Phoenix"--rising out of the ashes...
Welbike Parascooter Mark I #798
BSA Folding Para Bicycle R38199
"For those who fought for it...Freedom has a taste the protected will never know"
- lt.luke
- G-General
- Posts: 9899
- Joined: Fri May 09, 2003 7:56 am
- Location: Oklahoma
- Contact:
Re: FS VEP GPW Inlet Manifold
Thanks!Michael J. Boyle wrote:You don't have the exhaust side, do you?
Luke,
I do have an exhaust manifold, but I am pretty sure it is an MB type. I will have to take a look and will let you know.
Mike
Luke Sparks
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
- Michael O.
- G-Lieutenant General
- Posts: 6131
- Joined: Wed Feb 26, 2003 12:29 am
- Location: The Great State of Nebraska
Re: FS VEP GPW Inlet Manifold
If everyone else is fooling around, I'll buy it from you.
Michael O’Connell
Too many jeeps…and a Dodge.
MVPA 13861
Too many jeeps…and a Dodge.
MVPA 13861
Who is online
Users browsing this forum: No registered users and 37 guests