GPW 1st contract PARTS LIST. Interest sought in reproduction
-
- G-Lieutenant General
- Posts: 3598
- Joined: Fri Dec 13, 2002 2:54 pm
- Location: Sydney, Australia.
- Contact:
GPW 1st contract PARTS LIST. Interest sought in reproduction
Hi all,
I am in a position to reproduce manuals (done properly through professional printers, not on a photocopier in the spare room!). Since i recently obtained a copy of the 1st contract GPW parts list (TM10-1348 PARTS LIST, FORD Truck 1/4 ton, CONTRACT 398-QM-10977, USA REG #'S 2054778- 2069777, FEB 1942) , i am wondering if there is any interest from people out there in reproducing this manual.
I am not sure of a price, but it would probably be dependent on interest. It would be an authentic reproduction with (as close as possible) coloured card cover as per original and clear crisp pictures/text as per original. Maybe $30-$40 each ( could be more, could be less).
They very rarely appear for sale, so i figured that if they were reproduced, there might be a fare few people who would be interested. If you are, can you either post a reply here or PM me.
Alternatively, if you know that this has already been reproduced and is out there for commercial sale, please let me know!
Thanks,
Ian.
I also put the same thread in the manuals forum if you prefer to reply there. http://www.g503.com/forums/viewtopic.php?f=91&t=150650" onclick="window.open(this.href);return false;
I am in a position to reproduce manuals (done properly through professional printers, not on a photocopier in the spare room!). Since i recently obtained a copy of the 1st contract GPW parts list (TM10-1348 PARTS LIST, FORD Truck 1/4 ton, CONTRACT 398-QM-10977, USA REG #'S 2054778- 2069777, FEB 1942) , i am wondering if there is any interest from people out there in reproducing this manual.
I am not sure of a price, but it would probably be dependent on interest. It would be an authentic reproduction with (as close as possible) coloured card cover as per original and clear crisp pictures/text as per original. Maybe $30-$40 each ( could be more, could be less).
They very rarely appear for sale, so i figured that if they were reproduced, there might be a fare few people who would be interested. If you are, can you either post a reply here or PM me.
Alternatively, if you know that this has already been reproduced and is out there for commercial sale, please let me know!
Thanks,
Ian.
I also put the same thread in the manuals forum if you prefer to reply there. http://www.g503.com/forums/viewtopic.php?f=91&t=150650" onclick="window.open(this.href);return false;
Australian Jeep Investigator
MB: 131175
GPW: 11730.
GPW: 225290.
Aust trailer: GMH 3- #211
http://www.vintageengines.net
MB: 131175
GPW: 11730.
GPW: 225290.
Aust trailer: GMH 3- #211
http://www.vintageengines.net
- Alasdair Brass
- G-Lieutenant General
- Posts: 4187
- Joined: Sun Dec 15, 2002 10:59 am
- Location: Christchurch New Zealand
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
Hi Ian,
I'm interested, thanks.
Al
I'm interested, thanks.
Al
D. Alasdair Brass
New Zealand.
MVPA 5676
GPW 53126
MB 290463
Bantam T3 36501
Part of the G since early '98
New Zealand.
MVPA 5676
GPW 53126
MB 290463
Bantam T3 36501
Part of the G since early '98
- Chuck Lutz
- Gee Addict
- Posts: 26829
- Joined: Wed Jun 28, 2006 7:00 am
- Location: Jeep Heaven
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
Ian....Below is the TM 10-1348 PARTS MANUAL you are going to reproduce, right?
Will you also be reproducing the TM 10-1349 MAINTENANCE MANUAL?
Chuck Lutz
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
-
- G-Lieutenant General
- Posts: 3598
- Joined: Fri Dec 13, 2002 2:54 pm
- Location: Sydney, Australia.
- Contact:
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
Hi Al, thanks for the interest!
Hi Chuck, yes that is the version of the parts list i intended to reproduce. At present i wasnt thinking of the maintenance manual, however if there is enough interest in it too we would surely consider it.
Cheers,
Ian.
Hi Chuck, yes that is the version of the parts list i intended to reproduce. At present i wasnt thinking of the maintenance manual, however if there is enough interest in it too we would surely consider it.
Cheers,
Ian.
Australian Jeep Investigator
MB: 131175
GPW: 11730.
GPW: 225290.
Aust trailer: GMH 3- #211
http://www.vintageengines.net
MB: 131175
GPW: 11730.
GPW: 225290.
Aust trailer: GMH 3- #211
http://www.vintageengines.net
- Chuck Lutz
- Gee Addict
- Posts: 26829
- Joined: Wed Jun 28, 2006 7:00 am
- Location: Jeep Heaven
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
Looking at the two repop manuals among the originals I have....the repops seem to have been produced in more than one way....
I have one that looks like the book was simply lain as flat as possible and a photograph taken of each page and there is some distortion to some pages near the binding.
I have one that is spiral bound but looks like the original was sacrificed and it's binding removed since the pages seem straight in it...
Will yours be marked in the inside cover so that they can be distinguished in five years from an original? Aside from having some CSI forensic investigation done on it?
I have one that looks like the book was simply lain as flat as possible and a photograph taken of each page and there is some distortion to some pages near the binding.
I have one that is spiral bound but looks like the original was sacrificed and it's binding removed since the pages seem straight in it...
Will yours be marked in the inside cover so that they can be distinguished in five years from an original? Aside from having some CSI forensic investigation done on it?
Chuck Lutz
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
-
- G-Colonel
- Posts: 1611
- Joined: Sun Jun 26, 2005 6:39 pm
- Location: Saint Stephen, MN
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
I would be interested in both manuals.
Dan
Dan
Dan Schultz
Retired USA SFC
GP 9275
GPW 14944 M38 MC70324
M38A1 MD20035
K-38 Lineman Trailer
Retired USA SFC
GP 9275
GPW 14944 M38 MC70324
M38A1 MD20035
K-38 Lineman Trailer
-
- G-Brigadier General
- Posts: 2099
- Joined: Sun Jun 03, 2007 9:25 pm
- Location: Nevada
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
February 1942?
Restoring June '42 Script GPW Phone 443-865-4800 / Email davidmorganthall@gmail.com
-
- G-Lieutenant General
- Posts: 3598
- Joined: Fri Dec 13, 2002 2:54 pm
- Location: Sydney, Australia.
- Contact:
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
Hi guys,
This would be done properly, no camera's, no spiral binding. My original will be pulled apart (as with all my other original manuals which have been reproduced), digitally scanned, any imperfections/stains/marks etc removed and then properly printed on a proper printing machine. They will be done by my father who has been a book printer for 44 years!
If you go to http://www.vintageengines.net/page10.htm" onclick="window.open(this.href);return false;, you can see a small proportion of manuals which have been done by us in the past. The TM 9807 while not original, is spiral bound because it is so thick and we wanted it as a manual which could be used, not just break apart after a few openings like other repro's. My parents mostly do stationary engine and vintage car manuals, but with my interest in MV's, they have done some MV manuals as seen on the site.
Chuck, it is a very good point you make about the repro 'tag'. I shall look into it and let you know how we go. It should be easy to do and would be non invasive.
Dan- thanks mate. I shall note the interest in the maintenance manual too.
David. Yes mate, February 1942. This is the first (ever?) GPW parts list published for a 1st contract GPW. As far as i know, that is GPW's in the SN range 1-15000 (though i`m sure Tom W could give a more accurate number if i am wrong). The USA rego # is the easier way to go for this (but i guess not if the USA # isnt known).
Cheers,
Ian.
This would be done properly, no camera's, no spiral binding. My original will be pulled apart (as with all my other original manuals which have been reproduced), digitally scanned, any imperfections/stains/marks etc removed and then properly printed on a proper printing machine. They will be done by my father who has been a book printer for 44 years!
If you go to http://www.vintageengines.net/page10.htm" onclick="window.open(this.href);return false;, you can see a small proportion of manuals which have been done by us in the past. The TM 9807 while not original, is spiral bound because it is so thick and we wanted it as a manual which could be used, not just break apart after a few openings like other repro's. My parents mostly do stationary engine and vintage car manuals, but with my interest in MV's, they have done some MV manuals as seen on the site.
Chuck, it is a very good point you make about the repro 'tag'. I shall look into it and let you know how we go. It should be easy to do and would be non invasive.
Dan- thanks mate. I shall note the interest in the maintenance manual too.
David. Yes mate, February 1942. This is the first (ever?) GPW parts list published for a 1st contract GPW. As far as i know, that is GPW's in the SN range 1-15000 (though i`m sure Tom W could give a more accurate number if i am wrong). The USA rego # is the easier way to go for this (but i guess not if the USA # isnt known).
Cheers,
Ian.
Australian Jeep Investigator
MB: 131175
GPW: 11730.
GPW: 225290.
Aust trailer: GMH 3- #211
http://www.vintageengines.net
MB: 131175
GPW: 11730.
GPW: 225290.
Aust trailer: GMH 3- #211
http://www.vintageengines.net
- Chuck Lutz
- Gee Addict
- Posts: 26829
- Joined: Wed Jun 28, 2006 7:00 am
- Location: Jeep Heaven
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
Ian...you are correct....those two manuals I pictured are the FIRST GPW CONTRACT MANUALS for GPWs 1-15,000 and there are exactly 15000 USA numbers from USA 2054778 tp 2069777.....
Your method of reproduction is flawless and is the "right" way to faithfully reproduce these two documents....first class and high quality.
Given the number of surviving manuals out there....for the GPWs anyway, I think anyone who wants the PARTS TM should also get the MAINTENANCE TM as they both have some interesting info on the things listed for the First Contract....
Your method of reproduction is flawless and is the "right" way to faithfully reproduce these two documents....first class and high quality.
Given the number of surviving manuals out there....for the GPWs anyway, I think anyone who wants the PARTS TM should also get the MAINTENANCE TM as they both have some interesting info on the things listed for the First Contract....
Chuck Lutz
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
-
- G-Colonel
- Posts: 1568
- Joined: Thu May 06, 2004 8:24 am
- Location: Mesa, AZ
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
For a "repro tag" I would suggest placing "REPRINT" on the bottom right side of the front cover.
Yes, I would purchase both manuals.
Yes, I would purchase both manuals.
Phil Pizzi
Cmsgt USAF (ret)
1942 Script GPW S/N 9552
Cmsgt USAF (ret)
1942 Script GPW S/N 9552
- lt.luke
- G-General
- Posts: 9899
- Joined: Fri May 09, 2003 7:56 am
- Location: Oklahoma
- Contact:
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
My vote is to keep the reprint marking INSIDE on a clean (blank) page of the book, but indeed put one in there. I'm interested in both.
Luke Sparks
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
-
- US Army Major (Ret)
- Posts: 1930
- Joined: Sat Dec 14, 2002 6:52 am
- Location: Owasso, OK
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
Kindly put me down for a Parts manual and the maintenance if you decide to do it also.
Thanks,
Thanks,
Mike Wright
SEEKING MOTOR # GPW 2636
MVPA# 4341
GPW 2636, DOD 28 FEB 42, Reg# 2055811 (est)
GPW 104331 DOD 31 MAR 43, Reg# 20369321 (est)
MB-101008 DOD 27 NOV 41, Reg# W-2032462 (Original)
MB 438075, DOD 1 MAY 45, Reg# 20704591 (Original)
Converto ABN Dump 0886168
M2-HB gun trailer
SEEKING MOTOR # GPW 2636
MVPA# 4341
GPW 2636, DOD 28 FEB 42, Reg# 2055811 (est)
GPW 104331 DOD 31 MAR 43, Reg# 20369321 (est)
MB-101008 DOD 27 NOV 41, Reg# W-2032462 (Original)
MB 438075, DOD 1 MAY 45, Reg# 20704591 (Original)
Converto ABN Dump 0886168
M2-HB gun trailer
- Rod
- G-Brigadier General
- Posts: 2309
- Joined: Sat Dec 14, 2002 6:08 pm
- Location: Heart of Dixie
- Contact:
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
Ian,
Put me down for a copy of each. The will make a nice addition to our GPW#885.
Do you have a timeframe?
Thanks
Put me down for a copy of each. The will make a nice addition to our GPW#885.
Do you have a timeframe?
Thanks
I want to live life, til the day I die.
- Kent Chipman
- G-Lieutenant Colonel
- Posts: 1124
- Joined: Fri Dec 13, 2002 2:41 pm
- Location: Texas
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
I will take a set when you do them.
thanks,
Kent
thanks,
Kent
Kent "Mad Dog" Chipman
GPW I36I8 4-6-42
42WLA 25392
5-45 BT3
Converto 0650924
click for all my pictures:
http://www.surfacezero.com/g503/showgal ... nt-chipman" onclick="window.open(this.href);return false;
GPW I36I8 4-6-42
42WLA 25392
5-45 BT3
Converto 0650924
click for all my pictures:
http://www.surfacezero.com/g503/showgal ... nt-chipman" onclick="window.open(this.href);return false;
-
- G-Captain
- Posts: 757
- Joined: Mon Aug 06, 2007 1:18 pm
- Location: Northport, N.Y.
Re: GPW 1st contract PARTS LIST. Interest sought in reproduction
Hi. I would be interested in both.
John Killelea
John Killelea
Who is online
Users browsing this forum: No registered users and 40 guests