GP tailight measurement needed

1940 - 1941 BRC, MA, GP, Preproduction Prototypes. Knowledge Base NO EBAY or COMMERCIAL SALES.

Moderator: DavidA

Post Reply
User avatar
Joe P.
G-Colonel
G-Colonel
Posts: 1418
Joined: Sat Dec 14, 2002 8:35 am
Location:

GP tailight measurement needed

Post by Joe P. » Tue Jul 29, 2003 9:52 pm

Someone did a fair job of welding to reduce the diameter of the tailight holes on my GP for smaller modern lights. I'm ready to repair and remount the originals, but would like to confirm the hole diameter--same as MB/GPW? or different?

Could one of you GP owners please give me a tailight hole diameter measurement, and the distance from the bottom of the hole to the bottom of the tub?

Thanks. :D


Michael Browne
G-Colonel
G-Colonel
Posts: 1964
Joined: Wed Mar 26, 2003 9:30 pm
Location: Yackandandah, NE Victoria..greatest part of Australia, always 26 deg and sunny

GP taillight hole measurement

Post by Michael Browne » Wed Jul 30, 2003 4:12 pm

Hello Joe,
Hole diameter 4 1/4" & distance from bottom of tub 7/16" taken from ist series original body.
Hope this is of assistance, regards Michael GP 15141 GP 8616

User avatar
Joe P.
G-Colonel
G-Colonel
Posts: 1418
Joined: Sat Dec 14, 2002 8:35 am
Location:

Post by Joe P. » Wed Jul 30, 2003 10:13 pm

Thanks, Michael. :) Now on to the next step. :roll:
Joe GP9244


Post Reply

Return to “BRC MA GP Prototypes”

Who is online

Users browsing this forum: No registered users and 29 guests