M38A1 12 Volt Wiring Harness

1950 - 1968, M38, M38A1, M170, modifications, sugestions, and ideas, official MWO's and unofficial field mods.
Post Reply
Brian W. Emry
G-Staff Sergeant
G-Staff Sergeant
Posts: 62
Joined: Thu Jun 29, 2006 5:35 pm
Location: Sacramento - CA

M38A1 12 Volt Wiring Harness

Post by Brian W. Emry » Sun Mar 04, 2012 6:21 pm

I am just starting a restoration of a 1960 M38A1. Its a runner and has been coverted to 12 volt.

Is there a less exensive wiring harness available on the market that would let me to stay with the 12 volt system. I really don't want to purchase a $550.00 harness and then cut out the 24 volt connectors.

The existing harness is an original harness with the "Alterations".

Brian - Sacramento
1941 Dodge Power Wagon, Engine rebuilt - Restoration underway
1946 CJ2A Basket Case
1948 CJ2A Donor
1950 M38 Chassis done - restoring tub
1952 - 1956 M38A1's (2 operational, 4 on deck)
M274A5 Mule - Operational
1950 Bantam Trailer - Civilian
1952 M100,Trailer (2)
1967 M416,Trailer
1970 M101,Trailer


User avatar
dfield
G-Colonel
G-Colonel
Posts: 1323
Joined: Tue Apr 19, 2005 5:41 pm
Location: Orange County California

Re: M38A1 12 Volt Wiring Harness

Post by dfield » Wed Apr 11, 2012 5:49 am

I'm looking for the same thing. Will be doing an M38A1 in 12 volt.

User avatar
dfield
G-Colonel
G-Colonel
Posts: 1323
Joined: Tue Apr 19, 2005 5:41 pm
Location: Orange County California

Re: M38A1 12 Volt Wiring Harness

Post by dfield » Wed Apr 18, 2012 4:27 am

Anyone have experience with an after market 12 volt wiring harness. I am looking for a decent harness for a decent price.

wardo74
G-Sergeant
G-Sergeant
Posts: 41
Joined: Wed Oct 10, 2012 9:26 am
Location:

Re: M38A1 12 Volt Wiring Harness

Post by wardo74 » Thu Nov 15, 2012 5:38 pm

Looking at the same thing. Although for a little more money and some patience with Ebay, it may be possible to get some decent 24V gauges at a decent price. Still, the harness is expensive, and I would like to have turn signals and maybe even hazard lights.
First Love (& car): 1957 Willys CJ5
1999 graduate Vehicle Research Institute. Western Washington University
Current Project: 1952 M38A1 Ser # MD 26799

Marty, SoCal
G-Lieutenant General
G-Lieutenant General
Posts: 6319
Joined: Thu Mar 09, 2006 10:34 am
Location:

Re: M38A1 12 Volt Wiring Harness

Post by Marty, SoCal » Sun Nov 18, 2012 6:42 am

I think the guys over at Vintage Wiring of Maine will customize a harness for you, maybe leaving out uneeded circuits, M series end terminals left off for the gauges and lights, add in wiring for a 12V alternator, etc.

Otherwise, maybe a CJ-5 harness could be adapted?
43 Ford GPW 92098
53 Dunbar Kapple M100
Sold: 61 CJ-5, 41 T207 WC-1 Dodge closed cab pickup
MVPA #8266
USMC Tanker (1811, 1812), 85-93
ASE Automotive Master tech, former Chrysler-Jeep Level 4 Mastertech, CA state EA smog license

wardo74
G-Sergeant
G-Sergeant
Posts: 41
Joined: Wed Oct 10, 2012 9:26 am
Location:

Re: M38A1 12 Volt Wiring Harness

Post by wardo74 » Sun Nov 18, 2012 11:25 am

I was thinking of that too, the only question is the instrument gauges. On the Early CJ5 it was a combo gauge with Speedometer, fuel, & water temperature. Also I think they had a light for low oil pressure but I'm not sure. On the M38A1 all of the gauges are separate. I would like to have all the same gauges, but in 12 volt and then look for a harness that could do that. The early 12 volt gauges look the same size as 24 volt, but I don't know if they would work in the M38A1 instrument panel. Also the panel lights need to be in 12 volt.
First Love (& car): 1957 Willys CJ5
1999 graduate Vehicle Research Institute. Western Washington University
Current Project: 1952 M38A1 Ser # MD 26799

User avatar
wilfreeman
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 257
Joined: Sun Aug 20, 2006 10:07 am
Location: Richburg, SC

Re: M38A1 12 Volt Wiring Harness

Post by wilfreeman » Sun Nov 18, 2012 1:41 pm

How bad is the original harness? Is it too bad to patch it and use it? I'm sure Vintage would modify a cj harness for separate gauges if that would work for you. Are you going with a "regular" light switch? That's the worst part of an 'a1 harness - maybe you could make your own harness (they aren't really complicated if you take out the military lighting and connectors).
Matt
All I have left is an M762
Http://wilfreeman.wordpress.com (M38a1 build blog)

User avatar
Mike C
G-Sergeant First Class
G-Sergeant First Class
Posts: 88
Joined: Mon Mar 08, 2004 5:58 pm
Location: Austin, TX

Re: M38A1 12 Volt Wiring Harness

Post by Mike C » Sun Dec 16, 2012 5:52 am

EZwire. http://www.ezwiring.com/wiring_harness.html" onclick="window.open(this.href);return false;
I have one of the 11 circuit harnesses in my A1. I wanted to keep the military look, but my jeep had been way too modified to worry about putting it back all stock. And like you, the cost to do so I found prohibitively expensive. I found the product to be well made and support was good, too.
44 MB
52 M38A1
64 Corvette Coupe
68 Camaro
69 Camaro
72 GMC Jimmy
72 Datsun 240Z
02 GMC 2500HD Duramax

wardo74
G-Sergeant
G-Sergeant
Posts: 41
Joined: Wed Oct 10, 2012 9:26 am
Location:

Re: M38A1 12 Volt Wiring Harness

Post by wardo74 » Fri Jan 11, 2013 5:18 pm

What did you have for gauges? I have a 12 volt system and want the look of the original M38A1, but with 12 volt gauges.
First Love (& car): 1957 Willys CJ5
1999 graduate Vehicle Research Institute. Western Washington University
Current Project: 1952 M38A1 Ser # MD 26799

User avatar
Mike C
G-Sergeant First Class
G-Sergeant First Class
Posts: 88
Joined: Mon Mar 08, 2004 5:58 pm
Location: Austin, TX

Re: M38A1 12 Volt Wiring Harness

Post by Mike C » Mon Mar 18, 2013 6:45 pm

I have a set of Autometer industrial gauges I got cheap years ago from Surplus Center. I ditched the speedo and run a tach instead. I run my A1 off-road only at this point. My camera focused on the shift ball, so sorry it's a little fuzzy.
Image
44 MB
52 M38A1
64 Corvette Coupe
68 Camaro
69 Camaro
72 GMC Jimmy
72 Datsun 240Z
02 GMC 2500HD Duramax

User avatar
Mike C
G-Sergeant First Class
G-Sergeant First Class
Posts: 88
Joined: Mon Mar 08, 2004 5:58 pm
Location: Austin, TX

Re: M38A1 12 Volt Wiring Harness

Post by Mike C » Mon Mar 18, 2013 6:56 pm

I re-purposed WWII jeep switches for my A1. I removed the multi-function switch and put a plate in the opening. In that I put the dash light and blackout light switches which control the dash lights and my offroad driving lights respectively. The 6 volt switches can carry twice the current at 12 volts that they are rated for at 6 volts, so more than sufficient.
Image
44 MB
52 M38A1
64 Corvette Coupe
68 Camaro
69 Camaro
72 GMC Jimmy
72 Datsun 240Z
02 GMC 2500HD Duramax


Post Reply

Return to “M38, M38a1 Modifications”

Who is online

Users browsing this forum: No registered users and 42 guests