M8 armoured car bits and pieces for sale
-
- Sergeant Major of the Gee
- Posts: 283
- Joined: Mon Sep 19, 2005 7:15 am
- Location:
Re: M8 armoured car bits and pieces for sale
Can you send me pics of the protectoscope box holders?
Thanks,
Remy
Thanks,
Remy
Ford M8
M4 high speed
Diamond t 980
Ward la France m1a1
M4 high speed
Diamond t 980
Ward la France m1a1
-
- G-Captain
- Posts: 789
- Joined: Sat Sep 19, 2009 11:22 pm
- Location:
Re: M8 armoured car bits and pieces for sale
Hi therefinhead wrote:any m6 gun mount sleighs, or where you got yours? thanks
Sorry, the sleigh is long gone. These came with the project and I haven't seen any others to date.
Darryl Lennane
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
-
- G-Captain
- Posts: 789
- Joined: Sat Sep 19, 2009 11:22 pm
- Location:
Re: M8 armoured car bits and pieces for sale
Hi Remy
The picture of the protectoscope holders are toward the bottom of the first page. Let me know if you can't find them.
Thanks.
The picture of the protectoscope holders are toward the bottom of the first page. Let me know if you can't find them.
Thanks.
Darryl Lennane
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
-
- Sergeant Major of the Gee
- Posts: 283
- Joined: Mon Sep 19, 2005 7:15 am
- Location:
Re: M8 armoured car bits and pieces for sale
Ok i found them. Thought you ment something else....
Ford M8
M4 high speed
Diamond t 980
Ward la France m1a1
M4 high speed
Diamond t 980
Ward la France m1a1
-
- G-Captain
- Posts: 789
- Joined: Sat Sep 19, 2009 11:22 pm
- Location:
Re: M8 armoured car bits and pieces for sale
Hi all,
I have a few more items which are surplus to my M8 restoration.
* Master on/off switch
The switch works but the whole box will need a tidy up. Asking $30 USD. A French version is included.
* Radio box (NOS) (sold)
As fitted in the sponson. NOS in its original box. Asking $40 USD.
* Radio box - used
As fitted in the sponson. No lid. Will clean up okay. Asking $15 USD.
Please PM if interested. Payment by Paypal is okay and prices exclude the ride there.
I have a few more items which are surplus to my M8 restoration.
* Master on/off switch
The switch works but the whole box will need a tidy up. Asking $30 USD. A French version is included.
* Radio box (NOS) (sold)
As fitted in the sponson. NOS in its original box. Asking $40 USD.
* Radio box - used
As fitted in the sponson. No lid. Will clean up okay. Asking $15 USD.
Please PM if interested. Payment by Paypal is okay and prices exclude the ride there.
- Attachments
-
- 20170728_164831.jpg (240.3 KiB) Viewed 2568 times
Darryl Lennane
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
-
- G-Captain
- Posts: 789
- Joined: Sat Sep 19, 2009 11:22 pm
- Location:
Re: M8 armoured car bits and pieces for sale
Hi all,
Here are a few more parts which are surplus to my M8 restoration:
* .50 MG turret elevator mount. Complete with ammo can tray. Good condition. Asking $1500 USD.
* Throttle master cylinder. Missing internal piston. Asking $50 USD.
* Steel skirt for turret. About 600mm long. Ideal for turret repairs. Asking $30 USD.
Please PM if interested.
Here are a few more parts which are surplus to my M8 restoration:
* .50 MG turret elevator mount. Complete with ammo can tray. Good condition. Asking $1500 USD.
* Throttle master cylinder. Missing internal piston. Asking $50 USD.
* Steel skirt for turret. About 600mm long. Ideal for turret repairs. Asking $30 USD.
Please PM if interested.
- Attachments
-
- IMG_0475.JPG (222.55 KiB) Viewed 2516 times
Darryl Lennane
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
-
- G-Captain
- Posts: 789
- Joined: Sat Sep 19, 2009 11:22 pm
- Location:
Re: M8 armoured car bits and pieces for sale
Hi all,
I have some spare brake slave cylinder piston cups now that I have completed all my slave cylinders. They are NOS, made by Lockheed and are in good useable condition. Am asking $6 each.
I have some spare brake slave cylinder piston cups now that I have completed all my slave cylinders. They are NOS, made by Lockheed and are in good useable condition. Am asking $6 each.
- Attachments
-
- 20170925_162927 - Copy.jpg (147.6 KiB) Viewed 2487 times
-
- 20170925_162856 - Copy.jpg (196.44 KiB) Viewed 2487 times
Darryl Lennane
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
-
- G-Captain
- Posts: 789
- Joined: Sat Sep 19, 2009 11:22 pm
- Location:
Re: M8 armoured car bits and pieces for sale
Hi all
A couple of more things:
* Latch for hull/hatch visor . Looks a little rough, but works. Asking $10 USD
* Instrument panel mount for circuit breakers. Asking $10 USD
* Throttle slave cylinder mount. A reasonable repro. Asking $5 USD.
A couple of more things:
* Latch for hull/hatch visor . Looks a little rough, but works. Asking $10 USD
* Instrument panel mount for circuit breakers. Asking $10 USD
* Throttle slave cylinder mount. A reasonable repro. Asking $5 USD.
- Attachments
-
- IMG_0508.JPG (193.51 KiB) Viewed 2447 times
-
- IMG_0509.JPG (206.35 KiB) Viewed 2447 times
Darryl Lennane
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
-
- G-Captain
- Posts: 789
- Joined: Sat Sep 19, 2009 11:22 pm
- Location:
Re: M8 armoured car bits and pieces for sale
Hi there,
I have a few more parts left over from my M8 restoration and have updated what is left:
* NOS Circuit breakers for Generator. Asking $15 USD each
* Grenade box. Restored and painted. Latch pin is not original. Asking $40 USD.
* Engine rubber mounts. Tidied up and in useable condition. $20 USD for both.
* Axle grease seals. Asking $4 USD each.
* Distributor. Complete with cap. No points or condenser. Asking $50 USD.
* M70 Scope mount bracket piece – asking $30 USD (sold)
* .50 MG turret elevator mount. Complete with ammo can tray. Good condition. Asking $1500 USD.
* Throttle master cylinder. Missing internal piston. Asking $50 USD.
* Steel skirt for turret. About 600mm long. Ideal for turret repairs. Asking $20 USD.
* Latch for hull/hatch visor . Looks a little rough, but works. Asking $10 USD
* Instrument panel mount for circuit breakers. Asking $10 USD
* Throttle slave cylinder mount. A reasonable repro. Asking $5 USD
* Radio box – used. As fitted in the sponson. No lid. Will clean up okay. Asking $15 USD.
* Exhaust piece. One end missing but still has the heat shield. Asking $30 USD.
* Drag link. NOS. Asking $120 USD.
* Shock absorber mount. A little corroded and one of the mounting tabs is a little bent. Asking $10 USD.
* Transmission lever housing. Has cutaway top but otherwise in very good shape. Complete with levers and locking screws. Asking $100 USD.
* Fan tunnels for the radiator. New reproduction. $100 USD each.
* Brake backing plate. Will require some straightening. Asking $15 USD.
* Brake backing plate. Appears in good condition. Asking $30 USD.
* Brake slave cylinder caps. Will require restoration. Asking $10 USD for the adjustable end and $5 USD for the fixed end.
* Brake adjustment locking plate. Asking $5 USD.
* Brake shoe securing bolts with springs. Good condition. Asking $10 USD each.
* Sponson cover. French made. Rough but repairable. Asking $20 USD.
* 37mm rack part. Asking $10 USD.
* Transmission lever housing. Corrosion damage around the base. Asking $10 USD.
* Handbrake adjusting pin. A little bent but should straighten. Asking $5 USD.
* Turret traverse housing piece. A part of this where the handle would be has been cut away. Asking $5.
* Propellor shaft piece. Requires repair. Asking $10 USD.
Please PM if interested. Payment by Paypal is okay and prices exclude the ride there.
I have a few more parts left over from my M8 restoration and have updated what is left:
* NOS Circuit breakers for Generator. Asking $15 USD each
* Grenade box. Restored and painted. Latch pin is not original. Asking $40 USD.
* Engine rubber mounts. Tidied up and in useable condition. $20 USD for both.
* Axle grease seals. Asking $4 USD each.
* Distributor. Complete with cap. No points or condenser. Asking $50 USD.
* M70 Scope mount bracket piece – asking $30 USD (sold)
* .50 MG turret elevator mount. Complete with ammo can tray. Good condition. Asking $1500 USD.
* Throttle master cylinder. Missing internal piston. Asking $50 USD.
* Steel skirt for turret. About 600mm long. Ideal for turret repairs. Asking $20 USD.
* Latch for hull/hatch visor . Looks a little rough, but works. Asking $10 USD
* Instrument panel mount for circuit breakers. Asking $10 USD
* Throttle slave cylinder mount. A reasonable repro. Asking $5 USD
* Radio box – used. As fitted in the sponson. No lid. Will clean up okay. Asking $15 USD.
* Exhaust piece. One end missing but still has the heat shield. Asking $30 USD.
* Drag link. NOS. Asking $120 USD.
* Shock absorber mount. A little corroded and one of the mounting tabs is a little bent. Asking $10 USD.
* Transmission lever housing. Has cutaway top but otherwise in very good shape. Complete with levers and locking screws. Asking $100 USD.
* Fan tunnels for the radiator. New reproduction. $100 USD each.
* Brake backing plate. Will require some straightening. Asking $15 USD.
* Brake backing plate. Appears in good condition. Asking $30 USD.
* Brake slave cylinder caps. Will require restoration. Asking $10 USD for the adjustable end and $5 USD for the fixed end.
* Brake adjustment locking plate. Asking $5 USD.
* Brake shoe securing bolts with springs. Good condition. Asking $10 USD each.
* Sponson cover. French made. Rough but repairable. Asking $20 USD.
* 37mm rack part. Asking $10 USD.
* Transmission lever housing. Corrosion damage around the base. Asking $10 USD.
* Handbrake adjusting pin. A little bent but should straighten. Asking $5 USD.
* Turret traverse housing piece. A part of this where the handle would be has been cut away. Asking $5.
* Propellor shaft piece. Requires repair. Asking $10 USD.
Please PM if interested. Payment by Paypal is okay and prices exclude the ride there.
- Attachments
-
- 673857080.jpg (80.36 KiB) Viewed 2349 times
-
- 20171229_195859.jpg (156.38 KiB) Viewed 2349 times
Darryl Lennane
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
-
- G-Captain
- Posts: 789
- Joined: Sat Sep 19, 2009 11:22 pm
- Location:
Re: M8 armoured car bits and pieces for sale
Hi all,
I have some more parts left over from my M8 restoration and have updated what is left:
* Protectoscope box holder bolt. Working well. Asking $15 USD
* IN121 insulator. NOS. Asking $15 USD
* Cable, distributor to coil with conduit. Asking $20 USD.
* Cable with conduit. Asking $20 USD.
* Armored vehicle conduit. NOS with a tag which I can't make out the writing. 9 foot long. Asking $60 USD.
* Assorted conduit. Lengths are 24", 27" and 28". Not sure what they are from. Asking $30 USD for all three.
* Steel cable tubing. This goes between the rear terminal box and the taillight wiring. Asking $15 USD.
* NOS Circuit breakers for Generator. Asking $15 USD each
* Engine rubber mounts. Tidied up and in useable condition. $20 USD for both.
* Axle grease seals. Asking $4 USD each.
* Distributor. Complete with cap. No points or condenser. Asking $50 USD.
* .50 MG turret elevator mount. Complete with ammo can tray. Good condition. Asking $1500 USD.
* Throttle master cylinder. Missing internal piston. Asking $50 USD.
* Steel skirt for turret. About 600mm long. Ideal for turret repairs. Asking $20 USD.
* Latch for hull/hatch visor . Looks a little rough, but works. Asking $10 USD
* Instrument panel mount for circuit breakers. Asking $10 USD
* Throttle slave cylinder mount. A reasonable repro. Asking $5 USD
* Radio box – used. As fitted in the sponson. No lid. Will clean up okay. Asking $15 USD.
* Exhaust piece. One end missing but still has the heat shield. Asking $30 USD.
* Drag link. NOS. Asking $120 USD.
* Shock absorber mount. A little corroded and one of the mounting tabs is a little bent. Asking $10 USD.
* Transmission lever housing. Has cutaway top but otherwise in very good shape. Complete with levers and locking screws. Asking $100 USD.
* Fan tunnels for the radiator. New reproduction. $100 USD each.
* Brake backing plate. Will require some straightening. Asking $15 USD.
* Brake backing plate. Appears in good condition. Asking $30 USD.
* Brake slave cylinder caps. Will require restoration. Asking $10 USD for the adjustable end and $5 USD for the fixed end.
* Brake adjustment locking plate. Asking $5 USD.
* Brake shoe securing bolts with springs. Good condition. Asking $10 USD each.
* Sponson cover. French made. Rough but repairable. Asking $20 USD.
* 37mm rack part. Asking $10 USD.
* Transmission lever housing. Corrosion damage around the base. Asking $10 USD.
* Handbrake adjusting pin. A little bent but should straighten. Asking $5 USD.
* Turret traverse housing piece. A part of this where the handle would be has been cut away. Asking $5.
* Propellor shaft piece. Requires repair. Asking $10 USD.
Please PM if interested. Payment by Paypal is okay and prices exclude the ride there.
I have some more parts left over from my M8 restoration and have updated what is left:
* Protectoscope box holder bolt. Working well. Asking $15 USD
* IN121 insulator. NOS. Asking $15 USD
* Cable, distributor to coil with conduit. Asking $20 USD.
* Cable with conduit. Asking $20 USD.
* Armored vehicle conduit. NOS with a tag which I can't make out the writing. 9 foot long. Asking $60 USD.
* Assorted conduit. Lengths are 24", 27" and 28". Not sure what they are from. Asking $30 USD for all three.
* Steel cable tubing. This goes between the rear terminal box and the taillight wiring. Asking $15 USD.
* NOS Circuit breakers for Generator. Asking $15 USD each
* Engine rubber mounts. Tidied up and in useable condition. $20 USD for both.
* Axle grease seals. Asking $4 USD each.
* Distributor. Complete with cap. No points or condenser. Asking $50 USD.
* .50 MG turret elevator mount. Complete with ammo can tray. Good condition. Asking $1500 USD.
* Throttle master cylinder. Missing internal piston. Asking $50 USD.
* Steel skirt for turret. About 600mm long. Ideal for turret repairs. Asking $20 USD.
* Latch for hull/hatch visor . Looks a little rough, but works. Asking $10 USD
* Instrument panel mount for circuit breakers. Asking $10 USD
* Throttle slave cylinder mount. A reasonable repro. Asking $5 USD
* Radio box – used. As fitted in the sponson. No lid. Will clean up okay. Asking $15 USD.
* Exhaust piece. One end missing but still has the heat shield. Asking $30 USD.
* Drag link. NOS. Asking $120 USD.
* Shock absorber mount. A little corroded and one of the mounting tabs is a little bent. Asking $10 USD.
* Transmission lever housing. Has cutaway top but otherwise in very good shape. Complete with levers and locking screws. Asking $100 USD.
* Fan tunnels for the radiator. New reproduction. $100 USD each.
* Brake backing plate. Will require some straightening. Asking $15 USD.
* Brake backing plate. Appears in good condition. Asking $30 USD.
* Brake slave cylinder caps. Will require restoration. Asking $10 USD for the adjustable end and $5 USD for the fixed end.
* Brake adjustment locking plate. Asking $5 USD.
* Brake shoe securing bolts with springs. Good condition. Asking $10 USD each.
* Sponson cover. French made. Rough but repairable. Asking $20 USD.
* 37mm rack part. Asking $10 USD.
* Transmission lever housing. Corrosion damage around the base. Asking $10 USD.
* Handbrake adjusting pin. A little bent but should straighten. Asking $5 USD.
* Turret traverse housing piece. A part of this where the handle would be has been cut away. Asking $5.
* Propellor shaft piece. Requires repair. Asking $10 USD.
Please PM if interested. Payment by Paypal is okay and prices exclude the ride there.
- Attachments
-
- 20180415_192542.jpg (144.25 KiB) Viewed 2283 times
-
- 20180415_192332.jpg (143.03 KiB) Viewed 2283 times
-
- 20180415_192326.jpg (158.97 KiB) Viewed 2283 times
-
- 20180415_192122.jpg (178.84 KiB) Viewed 2283 times
-
- 20180415_192117.jpg (140.18 KiB) Viewed 2283 times
-
- 20180415_192056.jpg (134.61 KiB) Viewed 2283 times
-
- 20180415_192040.jpg (74.59 KiB) Viewed 2283 times
-
- 20180415_192034.jpg (84.02 KiB) Viewed 2283 times
Darryl Lennane
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
-
- G-Captain
- Posts: 789
- Joined: Sat Sep 19, 2009 11:22 pm
- Location:
Re: M8 armoured car bits and pieces for sale
Hi all,
An updated list of parts I have left from my M8 restoration:
* Protectoscope box holder bolt. Working well. Asking $10 USD
* IN121 insulator. NOS. Asking $10 USD
* Cable, distributor to coil with conduit. Asking $15 USD.
* Cable with conduit. Asking $15 USD.
* Armored vehicle conduit. NOS with a tag which I can't make out the writing. 9 foot long. Asking $50 USD.
* Assorted conduit. Lengths are 24", 27" and 28". Not sure what they are from. Asking $25 USD for all three.
* Steel cable tubing. This goes between the rear terminal box and the taillight wiring. Asking $10 USD.
* NOS Circuit breakers for Generator. Asking $15 USD each
* Engine rubber mounts. Tidied up and in useable condition. $20 USD for both.
* Axle grease seals. Asking $4 USD each.
* Distributor. Complete with cap. No points or condenser. Asking $40 USD.
* .50 MG turret elevator mount with ammo tray. Good condition. Asking $1000 USD.
* Throttle master cylinder. Missing internal piston. Asking $30 USD.
* Steel skirt for turret. About 600mm long. Ideal for turret repairs. Asking $20 USD.
* Latch for hull/hatch visor . Looks a little rough, but works. Asking $5 USD
* Instrument panel mount for circuit breakers. Asking $5 USD
* Throttle slave cylinder mount. A reasonable repro. Asking $2 USD
* Radio box – used. As fitted in the sponson. No lid. Will clean up okay. Asking $10 USD.
* Exhaust piece. One end missing but still has the heat shield. Asking $20 USD.
* Drag link. NOS. Asking $100 USD.
* Shock absorber mount. A little corroded and one of the mounting tabs is a little bent. Asking $10 USD.
* Transmission lever housing. Has cutaway top but otherwise in very good shape. Complete with levers and locking screws. Asking $90 USD.
* Fan tunnels for the radiator. New reproduction. $90 USD each.
* Brake backing plate. Will require some straightening. Asking $15 USD.
* Brake backing plate. Appears in good condition. Asking $25 USD.
* Brake slave cylinder caps. Will require restoration. Asking $5 USD each.
* Brake adjustment locking plate. Asking $5 USD.
* Brake shoe securing bolts with springs. Good condition. Asking $8 USD each.
* Sponson cover. French made. Rough but repairable. Asking $10 USD.
* 37mm rack part. Asking $5 USD.
* Transmission lever housing. Corrosion damage around the base. Asking $10 USD.
* Handbrake adjusting pin. A little bent but should straighten. Asking $5 USD.
* Turret traverse housing piece. A part of this where the handle would be has been cut away. Asking $5.
* Propellor shaft piece. Requires repair. Asking $10 USD.
Please PM if interested. Payment by Paypal is okay and prices exclude the rid
An updated list of parts I have left from my M8 restoration:
* Protectoscope box holder bolt. Working well. Asking $10 USD
* IN121 insulator. NOS. Asking $10 USD
* Cable, distributor to coil with conduit. Asking $15 USD.
* Cable with conduit. Asking $15 USD.
* Armored vehicle conduit. NOS with a tag which I can't make out the writing. 9 foot long. Asking $50 USD.
* Assorted conduit. Lengths are 24", 27" and 28". Not sure what they are from. Asking $25 USD for all three.
* Steel cable tubing. This goes between the rear terminal box and the taillight wiring. Asking $10 USD.
* NOS Circuit breakers for Generator. Asking $15 USD each
* Engine rubber mounts. Tidied up and in useable condition. $20 USD for both.
* Axle grease seals. Asking $4 USD each.
* Distributor. Complete with cap. No points or condenser. Asking $40 USD.
* .50 MG turret elevator mount with ammo tray. Good condition. Asking $1000 USD.
* Throttle master cylinder. Missing internal piston. Asking $30 USD.
* Steel skirt for turret. About 600mm long. Ideal for turret repairs. Asking $20 USD.
* Latch for hull/hatch visor . Looks a little rough, but works. Asking $5 USD
* Instrument panel mount for circuit breakers. Asking $5 USD
* Throttle slave cylinder mount. A reasonable repro. Asking $2 USD
* Radio box – used. As fitted in the sponson. No lid. Will clean up okay. Asking $10 USD.
* Exhaust piece. One end missing but still has the heat shield. Asking $20 USD.
* Drag link. NOS. Asking $100 USD.
* Shock absorber mount. A little corroded and one of the mounting tabs is a little bent. Asking $10 USD.
* Transmission lever housing. Has cutaway top but otherwise in very good shape. Complete with levers and locking screws. Asking $90 USD.
* Fan tunnels for the radiator. New reproduction. $90 USD each.
* Brake backing plate. Will require some straightening. Asking $15 USD.
* Brake backing plate. Appears in good condition. Asking $25 USD.
* Brake slave cylinder caps. Will require restoration. Asking $5 USD each.
* Brake adjustment locking plate. Asking $5 USD.
* Brake shoe securing bolts with springs. Good condition. Asking $8 USD each.
* Sponson cover. French made. Rough but repairable. Asking $10 USD.
* 37mm rack part. Asking $5 USD.
* Transmission lever housing. Corrosion damage around the base. Asking $10 USD.
* Handbrake adjusting pin. A little bent but should straighten. Asking $5 USD.
* Turret traverse housing piece. A part of this where the handle would be has been cut away. Asking $5.
* Propellor shaft piece. Requires repair. Asking $10 USD.
Please PM if interested. Payment by Paypal is okay and prices exclude the rid
Darryl Lennane
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
-
- G-Captain
- Posts: 789
- Joined: Sat Sep 19, 2009 11:22 pm
- Location:
Re: M8 armoured car bits and pieces for sale
Hi all
Here is another wee item to add to the list. These are NOS taillight plugs for the M8 and M20 armoured car. It is NOS but I opened the pack just to confirm what they are. Am asking $12 USD plus the ride there. Postage to the US is likely to be about $10 USD. Please PM if interested.
Here is another wee item to add to the list. These are NOS taillight plugs for the M8 and M20 armoured car. It is NOS but I opened the pack just to confirm what they are. Am asking $12 USD plus the ride there. Postage to the US is likely to be about $10 USD. Please PM if interested.
- Attachments
-
- 20180524_155815.jpg (75.99 KiB) Viewed 2213 times
-
- 20180524_155750.jpg (91.29 KiB) Viewed 2213 times
-
- 20180524_155732.jpg (91.6 KiB) Viewed 2213 times
Darryl Lennane
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
-
- Sergeant Major of the Gee
- Posts: 300
- Joined: Sat Apr 27, 2013 10:09 am
- Location: Harrison, Arkansas
-
- Sergeant Major of the Gee
- Posts: 300
- Joined: Sat Apr 27, 2013 10:09 am
- Location: Harrison, Arkansas
Re: M8 armoured car bits and pieces for sale
Darryl,
Got the Gen. breaker and it is exactly what I needed for my T16.
Thanks
Ron McAfee
Got the Gen. breaker and it is exactly what I needed for my T16.
Thanks
Ron McAfee
-
- G-Captain
- Posts: 789
- Joined: Sat Sep 19, 2009 11:22 pm
- Location:
Re: M8 armoured car bits and pieces for sale
Hi Ron
Great stuff! Thanks again.
Great stuff! Thanks again.
Darryl Lennane
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
NZ
1943 Willys MB
1941 LP2A MG Carrier
1943 White M3A1 AOP
1942 Willys MBT
1944 Ford M8 Armoured Car
1945 Ford M20 Armoured Car
Who is online
Users browsing this forum: No registered users and 55 guests