Parts needed for GPW3606 rebuild
-
- G-Colonel
- Posts: 1481
- Joined: Tue Jul 30, 2013 12:14 pm
- Location: Chartres, FR
Parts needed for GPW3606 rebuild
Hi all!
Instead of posting for each part, I thought I'd better write up a full and up-to-date list of all the parts I will need.
I am fully aware that some are close to impossible to find, but who knows...
I am looking for:
BODY
-Outer windshield frame, possible "Ford" marked
-Windshield brackets on the cowl found, + unmarked bolts+ thumb screws
-Windshield and top bow chains
-Ford top bow
-Ford top bow cast swivels
-Early F small mouth fuel tank
-1 TIGER EY reflector
-Rear seat F hooks
- 1 F grill blackout marker, with felt seal
FRAME
-Original Willys bumper + wood filler
-Various donor sections, or NOS (bumper gussets etc) found
TRANSMISSION
-Early right fill F case, or early Willys style found
-Scalopped F shafts found the short one
-Thin F transfer shifter canes
ENGINE
-Early block (Wilson or Ford) found
-Early F intake manifold
-F carb spring tab
-F coil
-F coil D washers
-F tall crossover tube
-F early carb and filter air horns found
-F AC pancake found
-Early F dipstick + tube found
-Early F valve cover found + downdraft tube
-Ford stamped crankshaft pulley
-Autolite GEG5001A genny
DASHBOARD
-Paint can SW AMP gauge
-Early long needle SW speedo, classic style OR with white drums
-Choke+throttle stamped knobs
-BO drive switch found
-Original foot starter switch
-TOBE hinged filterette
-Black SHELLER
-Dash "lights" with extensions
-F IGN switch, keyed, small bezel hole.
I can trade with a perfect F toggle switch + NOS h700 barrel + nos h700 keys; barrel and toggle can be switched in seconds.
TOOLS & ACCESSORIES
-Almost anything correct for a 3/3/42 GPW!
Instead of posting for each part, I thought I'd better write up a full and up-to-date list of all the parts I will need.
I am fully aware that some are close to impossible to find, but who knows...
I am looking for:
BODY
-Outer windshield frame, possible "Ford" marked
-Windshield brackets on the cowl found, + unmarked bolts+ thumb screws
-Windshield and top bow chains
-Ford top bow
-Ford top bow cast swivels
-Early F small mouth fuel tank
-1 TIGER EY reflector
-Rear seat F hooks
- 1 F grill blackout marker, with felt seal
FRAME
-Original Willys bumper + wood filler
-Various donor sections, or NOS (bumper gussets etc) found
TRANSMISSION
-Early right fill F case, or early Willys style found
-Scalopped F shafts found the short one
-Thin F transfer shifter canes
ENGINE
-Early block (Wilson or Ford) found
-Early F intake manifold
-F carb spring tab
-F coil
-F coil D washers
-F tall crossover tube
-F early carb and filter air horns found
-F AC pancake found
-Early F dipstick + tube found
-Early F valve cover found + downdraft tube
-Ford stamped crankshaft pulley
-Autolite GEG5001A genny
DASHBOARD
-Paint can SW AMP gauge
-Early long needle SW speedo, classic style OR with white drums
-Choke+throttle stamped knobs
-BO drive switch found
-Original foot starter switch
-TOBE hinged filterette
-Black SHELLER
-Dash "lights" with extensions
-F IGN switch, keyed, small bezel hole.
I can trade with a perfect F toggle switch + NOS h700 barrel + nos h700 keys; barrel and toggle can be switched in seconds.
TOOLS & ACCESSORIES
-Almost anything correct for a 3/3/42 GPW!
Last edited by Fabrizio on Fri Nov 02, 2018 10:06 am, edited 4 times in total.
GPW #3606 “LIBBY”
"Jeep is America's only real sports car." - Enzo Ferrari
"Jeep is America's only real sports car." - Enzo Ferrari
-
- G-Colonel
- Posts: 1481
- Joined: Tue Jul 30, 2013 12:14 pm
- Location: Chartres, FR
Re: Parts needed for GPW3606 rebuild
Edited to add the rear seat hooks; transfer shifter canes; grill marker light and ign switch
GPW #3606 “LIBBY”
"Jeep is America's only real sports car." - Enzo Ferrari
"Jeep is America's only real sports car." - Enzo Ferrari
- tractor12
- banned
- Posts: 2097
- Joined: Tue Oct 17, 2006 3:01 pm
- Location: Atascadero CA
- Contact:
Re: Parts needed for GPW3606 rebuild
Pm sent
WC12 Wc 27 2 K38s Mz2 ambulance jeep 2 M3a4s M1a1 Chemical Mortar cart T4e1 usmc cart convertible
-
- G-Colonel
- Posts: 1481
- Joined: Tue Jul 30, 2013 12:14 pm
- Location: Chartres, FR
Re: Parts needed for GPW3606 rebuild
BTT!
GPW #3606 “LIBBY”
"Jeep is America's only real sports car." - Enzo Ferrari
"Jeep is America's only real sports car." - Enzo Ferrari
-
- Sergeant Major of the Gee
- Posts: 275
- Joined: Thu Jul 20, 2017 10:11 am
- Location: NE Georgia
Re: Parts needed for GPW3606 rebuild
PM sent.
1st LT., Counterintelligence, 4th Military Intelligence Detachment (4th ID) Mid '60's
A '43 Depot MB Tribute to 4th ID, "Teddy".
A July, 1944 MB well underway (bought a tub, fenders, rolling chases and 14 boxes of "stuff").
A '43 Depot MB Tribute to 4th ID, "Teddy".
A July, 1944 MB well underway (bought a tub, fenders, rolling chases and 14 boxes of "stuff").
- kdmann143
- G-Second Lieutenant
- Posts: 556
- Joined: Fri Dec 21, 2007 5:49 pm
- Location: Vancouver BC canada
Re: Parts needed for GPW3606 rebuild
Pm sent for :
F marked top bow and generator .
F marked top bow and generator .
1942 GPW
1943 Gpw
1943 GPW Radio Jeep USMC 48649
1942 Slat grill
1943 Bantam trailer
44 MB sold
42 CDLV sold
45 Gpw sold
45 gpw sold
1950 M100 sold
1943 Gpw
1943 GPW Radio Jeep USMC 48649
1942 Slat grill
1943 Bantam trailer
44 MB sold
42 CDLV sold
45 Gpw sold
45 gpw sold
1950 M100 sold
-
- G-Lieutenant General
- Posts: 4561
- Joined: Sun Jul 20, 2003 6:03 pm
- Location: Little Meadows PA
Re: Parts needed for GPW3606 rebuild
I have these at least,
Last edited by Adam on Fri Nov 02, 2018 7:43 pm, edited 1 time in total.
-
- G-Colonel
- Posts: 1481
- Joined: Tue Jul 30, 2013 12:14 pm
- Location: Chartres, FR
Re: Parts needed for GPW3606 rebuild
Edited the found items, still looking for a lot of gems!
GPW #3606 “LIBBY”
"Jeep is America's only real sports car." - Enzo Ferrari
"Jeep is America's only real sports car." - Enzo Ferrari
-
- G-Captain
- Posts: 749
- Joined: Fri Aug 12, 2016 9:30 pm
- Location: teignmouth Devon UK
Re: Parts needed for GPW3606 rebuild
Paint can ammeter on US ebay now ... expensive! - from Jays wartime jeeps - he is on G503
Barrie
Barrie
GPW 101005 DOD 3-2-43 20207773 (actual) Louisville
-
- G-Colonel
- Posts: 1481
- Joined: Tue Jul 30, 2013 12:14 pm
- Location: Chartres, FR
Re: Parts needed for GPW3606 rebuild
Thanks!
I’ve seen it but I need the 50 amp one
I’ve seen it but I need the 50 amp one
GPW #3606 “LIBBY”
"Jeep is America's only real sports car." - Enzo Ferrari
"Jeep is America's only real sports car." - Enzo Ferrari
-
- G-Colonel
- Posts: 1481
- Joined: Tue Jul 30, 2013 12:14 pm
- Location: Chartres, FR
Re: Parts needed for GPW3606 rebuild
Hi all!
It’s been a long time, but GPW 3606 still needs some parts.
For some reason I can’t edit the first message, so here is an updated list of what I am still looking for:
It’s been a long time, but GPW 3606 still needs some parts.
For some reason I can’t edit the first message, so here is an updated list of what I am still looking for:
Fabrizio wrote: ↑Tue Jan 16, 2018 5:34 am
BODY
-Outer windshield frame, possible "Ford" marked found
-Windshield brackets on the cowl found, + unmarked bolts+ thumb screws
-Windshield and top bow chains
-Ford top bow
-Ford top bow cast swivels found one
-Early F small mouth fuel tank found
-1 TIGER EY reflector
-Rear seat F hooks
- 1 F grill blackout marker, with felt seal
FRAME
-Original Willys bumper + wood filler found
-Various donor sections, or NOS (bumper gussets etc) found
TRANSMISSION
-Early right fill F case, or early Willys style found
-Scalopped F shafts found the short one
-Thin F transfer shifter canes found one
ENGINE
-Early block (Wilson or Ford) found
-Early F intake manifold
-F carb spring tab
-F coil found
-F coil D washers found one
-F tall crossover tube
-F early carb and filter air horns found
-F AC pancake found
-Early F dipstick + tube found
-Early F valve cover found + downdraft tube
-Ford stamped crankshaft pulley
-Autolite GEG5001A genny found
-early F engine mount plate
DASHBOARD
-Paint can SW AMP gauge found
-Early long needle SW speedo, classic style OR with white drums found
-Choke+throttle stamped knobs
-BO drive switch found
-Original foot starter switch
-TOBE hinged filterette found minus door
-Black SHELLER found
-Dash "lights" with extensions
-F IGN switch, keyed, small bezel hole.
I can trade with a perfect F toggle switch + NOS h700 barrel + nos h700 keys; barrel and toggle can be switched in seconds.
TOOLS & ACCESSORIES
-Almost anything correct for a 3/3/42 GPW!
GPW #3606 “LIBBY”
"Jeep is America's only real sports car." - Enzo Ferrari
"Jeep is America's only real sports car." - Enzo Ferrari
-
- G-Colonel
- Posts: 1205
- Joined: Fri Oct 18, 2019 4:35 pm
- Location: california
Re: Parts needed for GPW3606 rebuild
I have gpw 3595, do you know which assembly plant?
-
- G-Colonel
- Posts: 1481
- Joined: Tue Jul 30, 2013 12:14 pm
- Location: Chartres, FR
Re: Parts needed for GPW3606 rebuild
Yes, 3606 is from Dearborn.
Original hood number is 2055994, dod is 3/3/42 if that helps
Original hood number is 2055994, dod is 3/3/42 if that helps
GPW #3606 “LIBBY”
"Jeep is America's only real sports car." - Enzo Ferrari
"Jeep is America's only real sports car." - Enzo Ferrari
-
- G-Colonel
- Posts: 1205
- Joined: Fri Oct 18, 2019 4:35 pm
- Location: california
-
- G-Lieutenant General
- Posts: 4561
- Joined: Sun Jul 20, 2003 6:03 pm
- Location: Little Meadows PA
Re: Parts needed for GPW3606 rebuild
I have some of the stuff,, pulley here, says ford, will measure it tomorrom, anything else ito would fit. seems thin on the one side, and a groove from seal, does say ford. $100 cash plus postage
Adam
Adam
Who is online
Users browsing this forum: No registered users and 44 guests