MB Pintle Hook Hardware will pay big money
-
- G-Major General
- Posts: 2842
- Joined: Wed Jan 14, 2009 4:51 pm
- Location: Alaska and Minnesota
Re: MB Pintle Hook Hardware will pay big money
perfect thanks I will expand my search parameters
1945 Willys MB
DOD 3-10-45
HN 20691353
SN 424804
My Restoration thread <a href=http://g503.com/forums/viewtopi ... >Here</a>
DOD 3-10-45
HN 20691353
SN 424804
My Restoration thread <a href=http://g503.com/forums/viewtopi ... >Here</a>
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: MB Pintle Hook Hardware will pay big money
Hopefully I may have a CCKW Shaft that still has the 7/1/6" NF X 1-1/8" Shouldered Bolts . Will also scrounge old GMC Parts Bins for you.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
- Chuck Lutz
- Gee Addict
- Posts: 26829
- Joined: Wed Jun 28, 2006 7:00 am
- Location: Jeep Heaven
Re: MB Pintle Hook Hardware will pay big money
So...did this get decided that the TR the A or the blank headed pintle hook bolts were correct for the MB?
Does it depend on the DOD of the jeep? (Early = TR for instance?)
If Niblet is looking for them it would help him and everyone else to have a timeline here....what does Lloyd's book say?
Does it depend on the DOD of the jeep? (Early = TR for instance?)
If Niblet is looking for them it would help him and everyone else to have a timeline here....what does Lloyd's book say?
Chuck Lutz
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
- Michael O.
- G-Lieutenant General
- Posts: 6131
- Joined: Wed Feb 26, 2003 12:29 am
- Location: The Great State of Nebraska
Re: MB Pintle Hook Hardware will pay big money
Chuck, I have all 5 of Lloyd’s MB books and I haven’t been able to find anything on Pintle hook bolts.....not yet any way...not loosing sleep over it.
All I can say for sure is that my Sept ‘44 MB #369488 has plain head pintle hook bolts. I haven’t removed them yet but I’m confident they are it’s originals...still has the two trailer hook eye bolts also.
The C/TR bolts I removed from my Oct ‘44 MB #379204 are coarse thread....so obviously not originally affixed there at the factory.....just need to figure out where else on the jeep this size and type of bolt were used.
All I can say for sure is that my Sept ‘44 MB #369488 has plain head pintle hook bolts. I haven’t removed them yet but I’m confident they are it’s originals...still has the two trailer hook eye bolts also.
The C/TR bolts I removed from my Oct ‘44 MB #379204 are coarse thread....so obviously not originally affixed there at the factory.....just need to figure out where else on the jeep this size and type of bolt were used.
Michael O’Connell
Too many jeeps…and a Dodge.
MVPA 13861
Too many jeeps…and a Dodge.
MVPA 13861
-
- G-Major General
- Posts: 2842
- Joined: Wed Jan 14, 2009 4:51 pm
- Location: Alaska and Minnesota
Re: MB Pintle Hook Hardware will pay big money
I havent been able to find anything in ANY book regarding this Pintle hook hardware issue and that is why i came to the forum
but it seems we are unable to verify if these bolts were marked or not,,I want marked ones
but it seems we are unable to verify if these bolts were marked or not,,I want marked ones
1945 Willys MB
DOD 3-10-45
HN 20691353
SN 424804
My Restoration thread <a href=http://g503.com/forums/viewtopi ... >Here</a>
DOD 3-10-45
HN 20691353
SN 424804
My Restoration thread <a href=http://g503.com/forums/viewtopi ... >Here</a>
- Michael O.
- G-Lieutenant General
- Posts: 6131
- Joined: Wed Feb 26, 2003 12:29 am
- Location: The Great State of Nebraska
Re: MB Pintle Hook Hardware will pay big money
Tim, as soon as I can I’ll get over to my other MB and remove one bolt and report back. I have it in storage.
Michael O’Connell
Too many jeeps…and a Dodge.
MVPA 13861
Too many jeeps…and a Dodge.
MVPA 13861
-
- G-First Lieutenant
- Posts: 689
- Joined: Sun Mar 25, 2012 11:19 am
- Location: Lexington Park, MD (Southern MD)
Re: MB Pintle Hook Hardware will pay big money
My 3/28/1945 MB was never taken apart. It was bought surplus by a fire department in 1946 and we bought it from them in 2003. For the most part the bolts are marked but a lot are not. My pintle hook bolts are not marked. I even have a mixture of marked bolts and unmarked bolts holding parts on. IMO your just fine with unmarked bolts but marked bolts could be correct as well. Hope you find some.
TJ Zackman
1945 Willys MB, 430923, 3/28/45
Scored 98.375% at 2019 MVPA Convention York, PA
1953 M38A1, 69248, 12/53, 20999713
MVPA# 37298
1945 Willys MB, 430923, 3/28/45
Scored 98.375% at 2019 MVPA Convention York, PA
1953 M38A1, 69248, 12/53, 20999713
MVPA# 37298
-
- Sergeant Major of the Gee
- Posts: 326
- Joined: Sun Feb 13, 2005 7:46 pm
- Location: Washington
Re: MB Pintle Hook Hardware will pay big money
I removed one off my May'45 MB and AA marked, which I believe to be unmolested originals 7/16 x 1 3/8" NF.
'43 MB, '45 MB, '52 M-38, '51 M-100
-
- Sergeant Major of the Gee
- Posts: 326
- Joined: Sun Feb 13, 2005 7:46 pm
- Location: Washington
Re: MB Pintle Hook Hardware will pay big money
I removed one off my May'45 MB and AA marked, which I believe to be unmolested originals 7/16 x 1 3/8" NF.
'43 MB, '45 MB, '52 M-38, '51 M-100
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: MB Pintle Hook Hardware will pay big money
And it has an unthreaded shoulder, correct?
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- Sergeant Major of the Gee
- Posts: 326
- Joined: Sun Feb 13, 2005 7:46 pm
- Location: Washington
Re: MB Pintle Hook Hardware will pay big money
Correct. Unthreaded shoulder.
'43 MB, '45 MB, '52 M-38, '51 M-100
-
- G-Colonel
- Posts: 1649
- Joined: Mon Jul 09, 2007 2:17 pm
- Location: Florence,Kentucky
- Contact:
Re: MB Pintle Hook Hardware will pay big money
Jerrykans,
Since it is 7/16 thread,may we assume a 5/8ths inch wrench head? A unique fastener for the G503.The only other 7/16ths NF bolts AFAIK are the three longer steering box bolts...MB radiator shroud studs to frame were,also.Thanks.
Since it is 7/16 thread,may we assume a 5/8ths inch wrench head? A unique fastener for the G503.The only other 7/16ths NF bolts AFAIK are the three longer steering box bolts...MB radiator shroud studs to frame were,also.Thanks.
Ralph
-
- G-Colonel
- Posts: 1406
- Joined: Mon Jul 06, 2009 4:55 pm
- Location: Oakdale Ca
Re: MB Pintle Hook Hardware will pay big money
Jerrykans. You are saying that the bolts are 1 3/8" long. Is that correct or a typo. Most people and books list them as 1 1/8" long.
Roger
Roger
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: MB Pintle Hook Hardware will pay big money
I just checked the parts list for the Tandem Tow Bar, there is a Pintle Hook Reinforcing Plate that adds thickness to the rear cross member, the kit reuses the two 7/16" X 1-1/8" Bolts. 1-3/8" is longer than what the TM 10's and SNL's list.
Last edited by Joe Gopan on Tue Dec 19, 2017 10:54 am, edited 1 time in total.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- Sergeant Major of the Gee
- Posts: 326
- Joined: Sun Feb 13, 2005 7:46 pm
- Location: Washington
Re: MB Pintle Hook Hardware will pay big money
If I wasn’t such an idiot I could post some photos that would be so much easier. Perhaps one of you could PM me an email I could send some photos to and you could post here for me? Thanks
'43 MB, '45 MB, '52 M-38, '51 M-100
Who is online
Users browsing this forum: No registered users and 40 guests