MB Radiator Core
- Michael O.
- G-Lieutenant General
- Posts: 6131
- Joined: Wed Feb 26, 2003 12:29 am
- Location: The Great State of Nebraska
MB Radiator Core
I just bought a radiator from another member that was suppose to be good but it turns out that it has a bad core and the radiator shop stated that the core cannot be repaired. They were wanting to charge me $575 to have it re-cored with a non-original style core. I remember reading of someone who was reproducing an excellent reproduction MB or GPW cores some years ago? Anyone remember who or where? For you guys who have had their radiators re-cored....what did you use? I must have an original looking core.
Michael O’Connell
Too many jeeps…and a Dodge.
MVPA 13861
Too many jeeps…and a Dodge.
MVPA 13861
- Bentwood
- G-Command Sergeant Major
- Posts: 208
- Joined: Thu Jun 13, 2013 7:00 pm
- Location: Henderson, NV
Re: MB Radiator Core
Did you speak with Lee at Brassworks Radiator restoration service in Paso Robles, CA for that quote?
Small Arms Armorer/Instructor
44MB
44MBT
45GPW
Always looking for info and gear for the Ordnance Technical Intelligence Teams
44MB
44MBT
45GPW
Always looking for info and gear for the Ordnance Technical Intelligence Teams
- Michael O.
- G-Lieutenant General
- Posts: 6131
- Joined: Wed Feb 26, 2003 12:29 am
- Location: The Great State of Nebraska
Re: MB Radiator Core
No, it was Midwest Radiator in Omaha, NE.
Does that shop in CA use “original” style cores?
Does that shop in CA use “original” style cores?
Michael O’Connell
Too many jeeps…and a Dodge.
MVPA 13861
Too many jeeps…and a Dodge.
MVPA 13861
- Bentwood
- G-Command Sergeant Major
- Posts: 208
- Joined: Thu Jun 13, 2013 7:00 pm
- Location: Henderson, NV
Re: MB Radiator Core
I spoke with Lee today. They have cores they can use but they also can make cores. They are well known for restoring radiators not repairing. This can be pricey, but if a vehicle is valuable enough it is worth it. When I spoke with him he said someone else asked about making MB radiators. As with all things he needs somebody to put up money before he can start stamping tanks. If someone had some poor shape original radiators it would be worth it. All the radiators from his shop have always been spot on.
Small Arms Armorer/Instructor
44MB
44MBT
45GPW
Always looking for info and gear for the Ordnance Technical Intelligence Teams
44MB
44MBT
45GPW
Always looking for info and gear for the Ordnance Technical Intelligence Teams
- Michael O.
- G-Lieutenant General
- Posts: 6131
- Joined: Wed Feb 26, 2003 12:29 am
- Location: The Great State of Nebraska
Re: MB Radiator Core
Thanks for the information. I’ll get in contact with them next week.
Michael O’Connell
Too many jeeps…and a Dodge.
MVPA 13861
Too many jeeps…and a Dodge.
MVPA 13861
- tractor12
- banned
- Posts: 2097
- Joined: Tue Oct 17, 2006 3:01 pm
- Location: Atascadero CA
- Contact:
Re: MB Radiator Core
If they need a few samples I am only 5 minutes away
WC12 Wc 27 2 K38s Mz2 ambulance jeep 2 M3a4s M1a1 Chemical Mortar cart T4e1 usmc cart convertible
- macaddict23
- G-Major General
- Posts: 2832
- Joined: Mon Mar 15, 2010 9:49 pm
- Location:
Re: MB Radiator Core
What are the characteristics of an original MB radiator core?
"Originality . . . It just needs to be what it is."
-
- G-Second Lieutenant
- Posts: 575
- Joined: Thu Dec 27, 2012 5:37 pm
- Location: Kissimmee FL
Re: MB Radiator Core
As Far as I`ve noticed Mac it`s the amount of cooling tubes and how there placed
plus I`ve only come across two core rads which could possibly be early 2a
They have 58 tubes both back and front
But there`s a difference in tube spacing front all equal
But rear the first two side tubes are closer together then a space plus there are three tubes close together more in the middle.
Ford are totally different again it`s a three core rad but tubes are not so wide as MB ones
Also there`s a difference with front and back on GPW ones too.
Totally front tubes 38
total rear tubes 38 but formed with a "V" void in the center
See attached for more clarification top pic shows three row of tubes and "V" in GPW rad core
Second Pic side of MB rad showing two tubes close with space
Last pic shows three tubes close together in center of MB rad
Geoff Bull
plus I`ve only come across two core rads which could possibly be early 2a
They have 58 tubes both back and front
But there`s a difference in tube spacing front all equal
But rear the first two side tubes are closer together then a space plus there are three tubes close together more in the middle.
Ford are totally different again it`s a three core rad but tubes are not so wide as MB ones
Also there`s a difference with front and back on GPW ones too.
Totally front tubes 38
total rear tubes 38 but formed with a "V" void in the center
See attached for more clarification top pic shows three row of tubes and "V" in GPW rad core
Second Pic side of MB rad showing two tubes close with space
Last pic shows three tubes close together in center of MB rad
Geoff Bull
- Attachments
-
- DSCN2003.jpg (124.62 KiB) Viewed 1194 times
-
- DSCN2005.jpg (125.87 KiB) Viewed 1194 times
-
- DSCN2004.jpg (125.13 KiB) Viewed 1194 times
- Bentwood
- G-Command Sergeant Major
- Posts: 208
- Joined: Thu Jun 13, 2013 7:00 pm
- Location: Henderson, NV
Re: MB Radiator Core
Since tractor offered to help. Do you think there would be an interest in getting these produced? Cores and complete radiators.
He is not going to make these on a folly and it is hard to just say it would be great. Love to hear from everyone on this to gauge interest to show Lee
He is not going to make these on a folly and it is hard to just say it would be great. Love to hear from everyone on this to gauge interest to show Lee
Small Arms Armorer/Instructor
44MB
44MBT
45GPW
Always looking for info and gear for the Ordnance Technical Intelligence Teams
44MB
44MBT
45GPW
Always looking for info and gear for the Ordnance Technical Intelligence Teams
-
- G-Major
- Posts: 914
- Joined: Wed Apr 16, 2014 6:20 pm
- Location:
- Contact:
Re: MB Radiator Core
Michael, I sent you a PM
1942 VEP GPW, J-2 winch, BC-659, 1919a4
1945 GPW, 1943 MBT
Sold - 1967 M151a1, 1943 MB, M416
www.ToThePointPolygraph.com
1945 GPW, 1943 MBT
Sold - 1967 M151a1, 1943 MB, M416
www.ToThePointPolygraph.com
-
- G-Major General
- Posts: 2842
- Joined: Wed Jan 14, 2009 4:51 pm
- Location: Alaska and Minnesota
Re: MB Radiator Core
I would buy 2 complete radiators,,I have had good luck with my radiator shop in Seattle as well they are old school
Michael if you need some assistance in that let me know,,I have had them do 2 radiators
Michael if you need some assistance in that let me know,,I have had them do 2 radiators
1945 Willys MB
DOD 3-10-45
HN 20691353
SN 424804
My Restoration thread <a href=http://g503.com/forums/viewtopi ... >Here</a>
DOD 3-10-45
HN 20691353
SN 424804
My Restoration thread <a href=http://g503.com/forums/viewtopi ... >Here</a>
-
- G-Second Lieutenant
- Posts: 575
- Joined: Thu Dec 27, 2012 5:37 pm
- Location: Kissimmee FL
Re: MB Radiator Core
Lee,
I would think there would certainly be a demand and into the future too !!!
But might be slow moving.
Guess it really would come down to price ??
Just have to look at the demand for a slat grill air filter, who would have thought even repro ones of those are in demand !!!!
Has anyone bought one of the newer rad repro`s and seen how close the cores are to originals or even the top and lower tanks on those ?
The ones that sellers are asking around $475 for ??
I did hear a while back a rad core company in Texas where making jeep cores to supply rad shops but not GPW cores.
Geoff Bull
I would think there would certainly be a demand and into the future too !!!
But might be slow moving.
Guess it really would come down to price ??
Just have to look at the demand for a slat grill air filter, who would have thought even repro ones of those are in demand !!!!
Has anyone bought one of the newer rad repro`s and seen how close the cores are to originals or even the top and lower tanks on those ?
The ones that sellers are asking around $475 for ??
I did hear a while back a rad core company in Texas where making jeep cores to supply rad shops but not GPW cores.
Geoff Bull
- Bentwood
- G-Command Sergeant Major
- Posts: 208
- Joined: Thu Jun 13, 2013 7:00 pm
- Location: Henderson, NV
Re: MB Radiator Core
Sorry, Lee is the guy at Brassworks considering making radiators. I agree there is enough interest but we have to convince him. Can anyone get me info on the guy making those cores. Thanks
Small Arms Armorer/Instructor
44MB
44MBT
45GPW
Always looking for info and gear for the Ordnance Technical Intelligence Teams
44MB
44MBT
45GPW
Always looking for info and gear for the Ordnance Technical Intelligence Teams
Who is online
Users browsing this forum: No registered users and 53 guests