captive nuts
-
- G-Command Sergeant Major
- Posts: 238
- Joined: Mon Jun 12, 2017 8:43 am
- Location:
captive nuts
Looking for some (4) captive nuts that go on the transmission hump. Please let me know who sells these in the US. Thanks,
-
- G-Colonel
- Posts: 1409
- Joined: Mon Jul 06, 2009 4:55 pm
- Location: Oakdale Ca
Re: captive nuts
Ron our host has the them in stock.
https://www.vintagejeeps.com/p-2158-cag ... a3549.aspx
https://www.vintagejeeps.com/p-2159-cag ... a2278.aspx
Roger
https://www.vintagejeeps.com/p-2158-cag ... a3549.aspx
https://www.vintagejeeps.com/p-2159-cag ... a2278.aspx
Roger
-
- G-Command Sergeant Major
- Posts: 238
- Joined: Mon Jun 12, 2017 8:43 am
- Location:
Re: captive nuts
Thanks I saw those but the type I'm referring to are the kind that go into the square hole but they have a little lip on them to hold from going through.
- macaddict23
- G-Major General
- Posts: 2832
- Joined: Mon Mar 15, 2010 9:49 pm
- Location:
Re: captive nuts
These?
- Attachments
-
- image.png (104.9 KiB) Viewed 538 times
-
- image.png (101.49 KiB) Viewed 538 times
"Originality . . . It just needs to be what it is."
-
- G-Colonel
- Posts: 1409
- Joined: Mon Jul 06, 2009 4:55 pm
- Location: Oakdale Ca
Re: captive nuts
Are they like these? McMaster-Carr calls them steel snap nuts.
https://www.mcmaster.com/#snap-in-nuts/=19lizwl
If this is them then just pick your thread size and sheet metal thickness. Your tub floor is about .050" (18 Ga.)
My guess is that you need 5/16-18 tpi. #90680A145
Roger
https://www.mcmaster.com/#snap-in-nuts/=19lizwl
If this is them then just pick your thread size and sheet metal thickness. Your tub floor is about .050" (18 Ga.)
My guess is that you need 5/16-18 tpi. #90680A145
Roger
-
- G-Command Sergeant Major
- Posts: 238
- Joined: Mon Jun 12, 2017 8:43 am
- Location:
Re: captive nuts
I have a photo of the ones I am looking for just don't know how to post the pic. Ill keep working at it.
Who is online
Users browsing this forum: No registered users and 47 guests