WTB exhaust bracket
- Carsten
- G-Colonel
- Posts: 1360
- Joined: Tue Feb 03, 2004 3:57 am
- Location: Denmark
- Contact:
WTB exhaust bracket
Hello guys...
I'm looking for this exhaust bracket for the Deep Mud Exhaust system:
FM-GPW-5251-B / WO-A-9082 CLAMP, exhaust pipe extension support strap
Key F in this drawing:
Should look like this:
Interested in NOS or good condition take-off!
If interested, i have a spare NOS WO-A-9086 to trade (key K above)! Same type as this one:
I'm looking for this exhaust bracket for the Deep Mud Exhaust system:
FM-GPW-5251-B / WO-A-9082 CLAMP, exhaust pipe extension support strap
Key F in this drawing:
Should look like this:
Interested in NOS or good condition take-off!
If interested, i have a spare NOS WO-A-9086 to trade (key K above)! Same type as this one:
Carsten
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
- Carsten
- G-Colonel
- Posts: 1360
- Joined: Tue Feb 03, 2004 3:57 am
- Location: Denmark
- Contact:
Re: WTB exhaust bracket
Still looking for this...
Carsten
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
- Carsten
- G-Colonel
- Posts: 1360
- Joined: Tue Feb 03, 2004 3:57 am
- Location: Denmark
- Contact:
Re: WTB exhaust bracket
Still interested in finding this clamp!
Carsten
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
-
- G-Colonel
- Posts: 1406
- Joined: Mon Jul 06, 2009 4:55 pm
- Location: Oakdale Ca
Re: WTB exhaust bracket
I think that it is the same clamp. Just cut the L portion off.
Roger
Roger
- Carsten
- G-Colonel
- Posts: 1360
- Joined: Tue Feb 03, 2004 3:57 am
- Location: Denmark
- Contact:
Re: WTB exhaust bracket
Roger,
Thanks, it's not the exact same. The 9082 clamp is formed to have the part G in the drawing fit inside the clamp when it's mounted, to carry the clamp and subsequently the hole extension pipe. This is not possible with the one I have, even if I cut it to the correct length...
Thanks, it's not the exact same. The 9082 clamp is formed to have the part G in the drawing fit inside the clamp when it's mounted, to carry the clamp and subsequently the hole extension pipe. This is not possible with the one I have, even if I cut it to the correct length...
Carsten
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: WTB exhaust bracket
It is nearly Identical to 800799 BRACKET, Muffler Support Clamp that attaches the short pipe on the M-38A1 Muffler to the rear cross member.
All NOS OEM M-38/M-38A1 Mufflers have this clamp. I may have a good used.
Give me a day or so and I may be able to e-Mail you a pic.
All NOS OEM M-38/M-38A1 Mufflers have this clamp. I may have a good used.
Give me a day or so and I may be able to e-Mail you a pic.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
- Carsten
- G-Colonel
- Posts: 1360
- Joined: Tue Feb 03, 2004 3:57 am
- Location: Denmark
- Contact:
Re: WTB exhaust bracket
I'm not experienced on M38A1, but from what I can see, bracket 800799 has the same problem, it doesn't have the "bulge" on the side opposite the opening, where the small WOA-657 STRAP goes. There is simply not enough room inside the bracket, to fit both extension pipe and strap, as you can on the correct WO-A-9082 CLAMP.
I may end up with fabricating one myself, or converting another bracket into what I need, but I have found all the other exhaust parts for my deep mud exhaust as originals, either NOS or used, so wanted to give it one more try on this last one!
I may end up with fabricating one myself, or converting another bracket into what I need, but I have found all the other exhaust parts for my deep mud exhaust as originals, either NOS or used, so wanted to give it one more try on this last one!
Carsten
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: WTB exhaust bracket
I checked, the M-38A1 Clamp did not have the flat bulge section. You may want to check out the clamps used at the rear for the CJ-2A Muffler. I checked the CJ-2A/CJ-3A Parts list, A-9082 is not listed for the CJ Jeeps, but 636004 for the MB may be close.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
- Carsten
- G-Colonel
- Posts: 1360
- Joined: Tue Feb 03, 2004 3:57 am
- Location: Denmark
- Contact:
Re: WTB exhaust bracket
Yes, 636004 is almost identical, except for the flat bulge for the carrying strap. It won't fit properly, I have tried it already.
Carsten
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: WTB exhaust bracket
I'll keep working on it.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
- Carsten
- G-Colonel
- Posts: 1360
- Joined: Tue Feb 03, 2004 3:57 am
- Location: Denmark
- Contact:
Re: WTB exhaust bracket
Thanks a lot, sir!
Carsten
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
- Carsten
- G-Colonel
- Posts: 1360
- Joined: Tue Feb 03, 2004 3:57 am
- Location: Denmark
- Contact:
Re: WTB exhaust bracket
Still need this bracket, if someone has one laying around...
Carsten
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
-
- Sergeant Major of the Gee
- Posts: 314
- Joined: Tue Oct 29, 2013 7:17 pm
- Location: Minnesota
Re: WTB exhaust bracket
Check with Army Jeep Parts. I got a complete deep mud exhaust set from them and it included this bracket. Thanks!
GSS
GSS
GSS
1942 MB 113037, "Slat Grill"
1945 MB 431740, 20698289-S
1942 MB 113037, "Slat Grill"
1945 MB 431740, 20698289-S
- Carsten
- G-Colonel
- Posts: 1360
- Joined: Tue Feb 03, 2004 3:57 am
- Location: Denmark
- Contact:
Re: WTB exhaust bracket
Thank you,
I was trying to see if it possible to source an original, either NOS or used.
I was trying to see if it possible to source an original, either NOS or used.
Carsten
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
- Carsten
- G-Colonel
- Posts: 1360
- Joined: Tue Feb 03, 2004 3:57 am
- Location: Denmark
- Contact:
Re: WTB exhaust bracket
Still looking for this bracket - NOS or used original.
Carsten
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
Nyborg, Denmark
_________________
1945 Willys MB 409616 (ex-Austrian Army)
Who is online
Users browsing this forum: Google [Bot] and 45 guests