I am attempting to build a replica of the engine cover for my latest Mule, which was missing the cover. Would someone take the time for me and measure the hole, dimensions of hole placement at the rear of the cover.
Thank You,
Chad
Engine Cover Build (need dimensions of hole placement)
-
- G-Corporal
- Posts: 23
- Joined: Mon Mar 27, 2017 3:12 pm
- Location:
-
- G-First Lieutenant
- Posts: 646
- Joined: Mon May 14, 2007 5:36 pm
- Location: Georgia
- Contact:
Re: Engine Cover Build (need dimensions of hole placement)
Will post pics of the different engine covers with dimensions later today. M274, M274 A1-A2 and M274-A5.
Mules are my passion
www.m274armymules.com
www.m274armymules.com
-
- G-First Lieutenant
- Posts: 646
- Joined: Mon May 14, 2007 5:36 pm
- Location: Georgia
- Contact:
Re: Engine Cover Build (need dimensions of hole placement)
Chad you did not tell me what series mule so I dimensioned all Deck Covers
M274 Deck Cover Dimensions
M274 Engine Cover Access and Latch Hole Dimensions
M274 Engine Cover Bed Latch Dimensions, Latches are Typical for the M274-A1 and A2
M274 Engine Cover Bed Latch Dimensions, Latches are Typical for the M274-A1 and A2
M274-A1 and A2 Deck Cover Dimensions, Holes are Typical for the M274-A5
M274-A5 Engine Cover Dimensions, Holes are Typical for the M274-A1 and A2
M274-A5 Engine Cover Bed Latch Dimensions
M274 Deck Cover Dimensions
M274 Engine Cover Access and Latch Hole Dimensions
M274 Engine Cover Bed Latch Dimensions, Latches are Typical for the M274-A1 and A2
M274 Engine Cover Bed Latch Dimensions, Latches are Typical for the M274-A1 and A2
M274-A1 and A2 Deck Cover Dimensions, Holes are Typical for the M274-A5
M274-A5 Engine Cover Dimensions, Holes are Typical for the M274-A1 and A2
M274-A5 Engine Cover Bed Latch Dimensions
Mules are my passion
www.m274armymules.com
www.m274armymules.com
-
- G-Corporal
- Posts: 23
- Joined: Mon Mar 27, 2017 3:12 pm
- Location:
Re: Engine Cover Build (need dimensions of hole placement)
Muleman,
Thank you for taking the time! Awesome job with pictures.
Thank you for taking the time! Awesome job with pictures.
-
- G-Sergeant Major
- Posts: 157
- Joined: Fri Dec 06, 2013 5:31 pm
- Location:
Re: Engine Cover Build (need dimensions of hole placement)
3/4" birch plywood works well. Use a router to make the grooves on top and relief cuts on bottom (so it lays flat). Once painted it is hard to distinguish from an original without close inspection.
-
- Sergeant Major of the Gee
- Posts: 451
- Joined: Mon Jul 19, 2010 7:32 pm
- Location: Southwest Iowa
Re: Engine Cover Build (need dimensions of hole placement)
It looks like this thread needs to be moved to the M274 Technical forum now.
Excellent job on the engine cover dimensions!
Excellent job on the engine cover dimensions!
1968 M274 A5 Mule
1945 Willys MB
1945 Willys MB
Who is online
Users browsing this forum: No registered users and 47 guests