M1151 front widows and air vent

1985 - Present, Questions, discussions, regarding anything related to the Humvee. (NO AUCTION or EBAY)

Moderator: Kurt Lesser

jwaller
G-Major
G-Major
Posts: 939
Joined: Fri Aug 29, 2008 10:24 am
Location: Lexington,SC.

M1151 front widows and air vent

Post by jwaller » Fri Jun 10, 2016 6:26 pm

Ok so I sourced the plastic duct that runs across the top of the metal dash in the V. Problem is my armor Windows sit too far inside the truck for it to fit.
The back of my front widow sits nearly flush with the center window diveder. These are much further forward and appear to be the same Windows I have.

Secondly. I need the black U shaped radio mount bracket for this dash. Anyone have one or the part # for it?
Attachments
image.png
image.png (188.61 KiB) Viewed 4732 times
XM818 W/W
M35A2 W/W .69 OD gears.
M1151


metalman
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 452
Joined: Sun Dec 23, 2012 8:42 am
Location: S.E. Wisconsin

Re: M1151 front widows and air vent

Post by metalman » Fri Jun 10, 2016 7:51 pm

I have a nice used black U bracket for $50.

jwaller
G-Major
G-Major
Posts: 939
Joined: Fri Aug 29, 2008 10:24 am
Location: Lexington,SC.

Re: M1151 front widows and air vent

Post by jwaller » Fri Jun 10, 2016 10:42 pm

Ok I'll take it. Now anyone have any clue as to my windshield issue.
XM818 W/W
M35A2 W/W .69 OD gears.
M1151

metalman
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 452
Joined: Sun Dec 23, 2012 8:42 am
Location: S.E. Wisconsin

Re: M1151 front widows and air vent

Post by metalman » Sat Jun 11, 2016 4:22 pm

The pic is M1151 windows, maybe you have 1114, they have a different offset. I also have a NOS set of the correct 1151 windows available if you end up needing them.

MagBlock
G-Sergeant First Class
G-Sergeant First Class
Posts: 77
Joined: Tue Aug 25, 2015 5:52 am
Location:

Re: M1151 front widows and air vent

Post by MagBlock » Wed Jun 15, 2016 8:10 pm

The windows you have installed sound like they would be for the 1114,
M1114, Windshield non-heated left side NSN 2510-01-435-9690 right side NSN 2510-01-435-9693

M1151, Windshield non-heated left side NSN 2510-01-535-6001 Part number 12512206-1 right side 2510-01-535-6000

Windows for the 1151/1152/1165/1167 all have the same offset. As you can see in the pictures, the larger part of the offset is the threat side on the 1151 and subsequent. It makes the windows sit out past the frame, The 1114 windows are just about even with the front side of the frame.

Hope the pictures help, have a good one.

Mike
Attachments
M1151 Winshield5.jpg
M1151 Winshield5.jpg (89.83 KiB) Viewed 4596 times
M1151 Windshield4.jpg
M1151 Windshield4.jpg (82.57 KiB) Viewed 4596 times
M1151 Windshield3.jpg
M1151 Windshield3.jpg (110.81 KiB) Viewed 4596 times
M1151 Windshield2.jpg
M1151 Windshield2.jpg (120.05 KiB) Viewed 4596 times
M1151 windshield1.jpg
M1151 window
M1151 windshield1.jpg (178.56 KiB) Viewed 4596 times

jwaller
G-Major
G-Major
Posts: 939
Joined: Fri Aug 29, 2008 10:24 am
Location: Lexington,SC.

Re: M1151 front widows and air vent

Post by jwaller » Fri Jun 17, 2016 2:12 am

So those look like the exact same frame on the 1151. All they did is turn the glass around and face it the other way in the frames. Seems like any easy swap to me. Pita but whatever.

The open side of the frame that you install the glass into now faces front in the truck. Also I notice from you picture that these frame have a foam gasket material that faces front. This seals them against the backside of the armor I suppose?
XM818 W/W
M35A2 W/W .69 OD gears.
M1151

MagBlock
G-Sergeant First Class
G-Sergeant First Class
Posts: 77
Joined: Tue Aug 25, 2015 5:52 am
Location:

Re: M1151 front widows and air vent

Post by MagBlock » Fri Jun 17, 2016 2:05 pm

You got it Brother, the seal on the outside mates to the windshield retainer.

I am looking for a set of retainers myself.

Mike

User avatar
86humv
G-Major General
G-Major General
Posts: 2752
Joined: Sat Aug 20, 2005 11:54 am
Location: Texas

Re: M1151 front widows and air vent

Post by 86humv » Sat Jun 18, 2016 9:23 am

M1151 repro steel bezels for the 2" and thicker glass.
All in :tm9-2320-387-24p fig. 210B, 189J
6432437
6432436
6432435
6432451
6432438
Image
Image
Image
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer

MagBlock
G-Sergeant First Class
G-Sergeant First Class
Posts: 77
Joined: Tue Aug 25, 2015 5:52 am
Location:

Re: M1151 front widows and air vent

Post by MagBlock » Fri Jul 15, 2016 7:01 pm

Hey Jason, here are the dims for the M1151 and subsequent heated and Non-Heated windshields.

M1151, Windshield non-heated left side NSN 2510-01-535-6001 Part number 12512206-1 right side 2510-01-535-6000. The windshield has a gasket around the front (threat side) that mates with the late MOD retainer system. A standard, non armored window gasket is placed around the lip that sticks out in the picture between the 1 3/4" and 5/8th" dimensions.

I'm looking for the Windshield retainers depicted in the picture below.

Mike
M1151 Windshield Dims 777.jpg
M1151 Windshield Offset Dims
M1151 Windshield Dims 777.jpg (82.39 KiB) Viewed 4397 times

ohiohmmwv
G-Lieutenant Colonel
G-Lieutenant Colonel
Posts: 1164
Joined: Fri Mar 15, 2013 6:13 pm
Location: Northeast Ohio

Re: M1151 front widows and air vent

Post by ohiohmmwv » Sun Jul 17, 2016 4:07 am

Would the ibis tech knockout windshields have the same issue hitting the plastic defroster duct on a m1151?

MagBlock
G-Sergeant First Class
G-Sergeant First Class
Posts: 77
Joined: Tue Aug 25, 2015 5:52 am
Location:

Re: M1151 front widows and air vent

Post by MagBlock » Sun Jul 17, 2016 7:05 pm

The M1151 & SUB, IVEE will not interfere.

The IVEE windshield Kit NSN: 2510-01-560-7672 will not interfere with the forward air ducting (Black Plastic with round vents).

IVEE Egress Window Driver (Left) NSN: 2510-01-560-7677

IVEE Egress Window Passenger (Right) NSN: 2510-01-560-7680

Currently, there are three window assemblies that are designed for the 1151 and subsequent. The ones listed earlier in this thread Heated and Non-Heated and the IVEE.

Mike
MagBlock Inc.
Last edited by MagBlock on Sun Jul 17, 2016 7:34 pm, edited 1 time in total.

MagBlock
G-Sergeant First Class
G-Sergeant First Class
Posts: 77
Joined: Tue Aug 25, 2015 5:52 am
Location:

Re: M1151 front widows and air vent

Post by MagBlock » Sun Jul 17, 2016 7:31 pm

M1114 IVEE, Vs. M1151 IVEE: Different National Stock Numbers.

Note: The M1114 IVEE has different NSN's than the IVEE for the M1151 and Sub.

If installing IVEE in an M1151 with Black Plastic Air Ducting (Round Vents) make sure you have or source the NSN listed in my last post.

USPTO US08066319-20111129-.jpg
USPTO Drawing IVEE
USPTO US08066319-20111129-.jpg (36.07 KiB) Viewed 4331 times
M1114 (IVEE) Windshield NSN's

Driver, 2510-01-552-0620

Passenger, 2510-01-552-0624

KIT, 2510-01-552-0617

Should have added this in the last post. Hope this helps.

Mike
MagBlock Inc.

MagBlock
G-Sergeant First Class
G-Sergeant First Class
Posts: 77
Joined: Tue Aug 25, 2015 5:52 am
Location:

Re: M1151 front widows and air vent

Post by MagBlock » Sun Jul 17, 2016 8:28 pm

M1151-------IVEE pic
M1151 IVEE.jpg
M1151 IVEE.jpg (40.21 KiB) Viewed 4325 times

Mike
MagBlock Inc.

Action
G-Lieutenant General
G-Lieutenant General
Posts: 5181
Joined: Mon Feb 06, 2006 3:19 pm
Location: East Tennessee
Contact:

Re: M1151 front widows and air vent

Post by Action » Mon Jul 18, 2016 5:21 am

BAE Systems made some of these removable windshields, too. I got the installation booklet from work. They had their own glass plant there in Ohio.

Jason

User avatar
blhar15
G-Sergeant First Class
G-Sergeant First Class
Posts: 86
Joined: Mon May 23, 2011 3:20 am
Location: Iowa

Re: M1151 front widows and air vent

Post by blhar15 » Sat Jul 23, 2016 3:25 am

M1114 windshields and M1151 are totally different. The M1114 does not have the metal surrounds just thick glass with a full rubber seal around them.
M1151
M1152


Post Reply

Return to “Humvee Technical Knowledge Base -”

Who is online

Users browsing this forum: No registered users and 55 guests