WC63 jump seat

Power Wagon truck forums, M37 etc.
Post Reply
Snowman-wc63
G-Private
G-Private
Posts: 3
Joined: Thu Jan 07, 2016 5:44 pm
Location:

WC63 jump seat

Post by Snowman-wc63 » Wed Feb 28, 2018 5:24 pm

Would anyone happen to know the wood dimensions for the rear folding jump seat on a WC63?


70th Division
G-Lieutenant General
G-Lieutenant General
Posts: 5638
Joined: Thu Dec 03, 2009 5:29 pm
Location:

Re: WC63 jump seat

Post by 70th Division » Wed Feb 28, 2018 8:51 pm

Hello Snowman,

I have the upper part of the seat on my 63, that folds up, and the wood is still there.
I will get some measurements tomorrow.
I don't think there is a base left on it.


Ray

70th Division
G-Lieutenant General
G-Lieutenant General
Posts: 5638
Joined: Thu Dec 03, 2009 5:29 pm
Location:

Re: WC63 jump seat

Post by 70th Division » Thu Mar 01, 2018 10:17 am

Hello Snowman,

I measured the wood boards that are attached to the upper seat back. The boards are weathered but I think I got it right.

I do not have the base of the seat.

The 2 upper seat back boards are :

20 inches wide, 3 3/4 inches tall , and are 3/4 inch thick wood.
They appear to be made of oak.
The bed is a wood composite style, and I believe a 1943 model, WC-63.

Someone else can confirm, but these were the "widest point" measurements made with regards to weathering.

I hope it helps.

Ray

Snowman-wc63
G-Private
G-Private
Posts: 3
Joined: Thu Jan 07, 2016 5:44 pm
Location:

Re: WC63 jump seat

Post by Snowman-wc63 » Thu Mar 01, 2018 1:34 pm

Hi 70th,
THANK YOU!!! That's the exact info I need, I aquired a set of brackets but the wood was removed.
Much appreciated, Thanks again!


Post Reply

Return to “Power Wagon Forums”

Who is online

Users browsing this forum: No registered users and 49 guests