FS: ALLISON STEEL RECONDITION PLATE
- Chuck Lutz
- Gee Addict
- Posts: 26829
- Joined: Wed Jun 28, 2006 7:00 am
- Location: Jeep Heaven
FS: ALLISON STEEL RECONDITION PLATE
I have a March 1945 date stamped Allison rebuild plate for sale. It has paint on it and I have never disturbed it but no visible damage to any of the markings and the four mounting holes are intact. This thing is made of STEEL and is pretty heavy....not like other aluminum or brass tags used in some instances.
Allison Steel Manufacturing = made from STEEL...guess they had enough and they had the stamping die to emboss it...
First email to me with "I'LL TAKE IT!" and it's yours....$100.00 includes shipping in soft bubble wrap postal bag if stateside. Overseas, you pay the difference.
THIS HAS BEEN SOLD.
Allison Steel Manufacturing = made from STEEL...guess they had enough and they had the stamping die to emboss it...
First email to me with "I'LL TAKE IT!" and it's yours....$100.00 includes shipping in soft bubble wrap postal bag if stateside. Overseas, you pay the difference.
THIS HAS BEEN SOLD.
Last edited by Chuck Lutz on Wed Mar 07, 2018 8:40 am, edited 1 time in total.
Chuck Lutz
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
-
- G-Colonel
- Posts: 1481
- Joined: Tue Jul 30, 2013 12:14 pm
- Location: Chartres, FR
Re: FS: ALLISON STEEL RECONDITION PLATE
Hi Chuck;
I'm very interested for my VEP that still has the 4 screws on the dash for "a" rebuild plate.
Could you measure yours (plate itself, and hole pattern) as precisely as possible so I can check my dash and know if it's a fit or not?
Thanks a lot!
I'm very interested for my VEP that still has the 4 screws on the dash for "a" rebuild plate.
Could you measure yours (plate itself, and hole pattern) as precisely as possible so I can check my dash and know if it's a fit or not?
Thanks a lot!
GPW #3606 “LIBBY”
"Jeep is America's only real sports car." - Enzo Ferrari
"Jeep is America's only real sports car." - Enzo Ferrari
-
- G-Command Sergeant Major
- Posts: 243
- Joined: Tue Aug 16, 2011 10:59 am
- Location: Oakland, CA
Re: FS: ALLISON STEEL RECONDITION PLATE
Thanks Fabrizio and Chuck. I'd much like to know also the measurements.
Best, Ed
Best, Ed
V/r Eddie
1942 GPW #5739 "Sentimental Reasons"
MVPA & MVCC
1942 GPW #5739 "Sentimental Reasons"
MVPA & MVCC
- Chuck Lutz
- Gee Addict
- Posts: 26829
- Joined: Wed Jun 28, 2006 7:00 am
- Location: Jeep Heaven
Re: FS: ALLISON STEEL RECONDITION PLATE
Sorry guys....it was just mailed to a buyer.
Chuck Lutz
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
-
- G-Command Sergeant Major
- Posts: 243
- Joined: Tue Aug 16, 2011 10:59 am
- Location: Oakland, CA
Re: FS: ALLISON STEEL RECONDITION PLATE
Chuck, ok, just mailed. The question was what did it measure. Little help here?
Thanks, Ed
Thanks, Ed
V/r Eddie
1942 GPW #5739 "Sentimental Reasons"
MVPA & MVCC
1942 GPW #5739 "Sentimental Reasons"
MVPA & MVCC
-
- G-Captain
- Posts: 780
- Joined: Sun Jan 26, 2003 8:36 pm
- Location: Northern Calif
Re: FS: ALLISON STEEL RECONDITION PLATE
Distance between the holes is 5 1/4 length and 1 1/2 wide
Hope this helps
Tom Furrer
Northern Calif
Hope this helps
Tom Furrer
Northern Calif
- macaddict23
- G-Major General
- Posts: 2832
- Joined: Mon Mar 15, 2010 9:49 pm
- Location:
Re: FS: ALLISON STEEL RECONDITION PLATE
From center-to-center of mounting holes, my original Allison plate has 5 3/16" and 1 5/16".
Dexter
Dexter
"Originality . . . It just needs to be what it is."
-
- G-Command Sergeant Major
- Posts: 243
- Joined: Tue Aug 16, 2011 10:59 am
- Location: Oakland, CA
Re: FS: ALLISON STEEL RECONDITION PLATE
Tom and Dexter, many thanks. It does help.
Best, Ed
Best, Ed
V/r Eddie
1942 GPW #5739 "Sentimental Reasons"
MVPA & MVCC
1942 GPW #5739 "Sentimental Reasons"
MVPA & MVCC
Who is online
Users browsing this forum: ajlang and 53 guests