Tools and Spares needed for 45MB

Manufacturers, configurations, Shovels, Axe, Wrenches, Oiler, F/E etc.
Post Reply
Thunderbird712
G-First Lieutenant
G-First Lieutenant
Posts: 689
Joined: Sun Mar 25, 2012 11:19 am
Location: Lexington Park, MD (Southern MD)

Tools and Spares needed for 45MB

Post by Thunderbird712 » Fri Nov 03, 2017 9:07 am

I need the following:

Tools:
Irwin screw driver. Preferably ink stamped but the stamp can be faded out as long as it correct screw driver
Fairmount 731A round
A-12268 Jack
Bristol Wrench with fluted head only

Spares:
Schrader tire valve caps in correct packaging
Schrader tire valve cores in correct packaging
Cotter Pin tin or an idea for a correct substitute

Thank you
TJ
Last edited by Thunderbird712 on Tue Jan 09, 2018 9:38 am, edited 4 times in total.
TJ Zackman
1945 Willys MB, 430923, 3/28/45
Scored 98.375% at 2019 MVPA Convention York, PA

1953 M38A1, 69248, 12/53, 20999713
MVPA# 37298


Thunderbird712
G-First Lieutenant
G-First Lieutenant
Posts: 689
Joined: Sun Mar 25, 2012 11:19 am
Location: Lexington Park, MD (Southern MD)

Re: Tools and Spares needed for 45MB

Post by Thunderbird712 » Sun Dec 10, 2017 8:21 am

BTT
TJ Zackman
1945 Willys MB, 430923, 3/28/45
Scored 98.375% at 2019 MVPA Convention York, PA

1953 M38A1, 69248, 12/53, 20999713
MVPA# 37298

User avatar
pjones
G-Major General
G-Major General
Posts: 2791
Joined: Wed Jan 05, 2011 1:26 pm
Location: East Tennessee

Re: Tools and Spares needed for 45MB

Post by pjones » Mon Dec 11, 2017 8:44 am

Zackman,

Are you dead set on an ink stamped Irwin? Federal and Tobrin may be another option. I can help you with the 28S and the driver.

Phil
pjones
'42 Ford GPW 7127
Need a MVMTS/GMTK?
Need a jeep toolkit?

Thunderbird712
G-First Lieutenant
G-First Lieutenant
Posts: 689
Joined: Sun Mar 25, 2012 11:19 am
Location: Lexington Park, MD (Southern MD)

Re: Tools and Spares needed for 45MB

Post by Thunderbird712 » Wed Dec 13, 2017 6:55 am

BTT. I found a Fairmount 28S but now need a Fairmount 731A after realizing it was a Pear head vice a round head which I need.
TJ Zackman
1945 Willys MB, 430923, 3/28/45
Scored 98.375% at 2019 MVPA Convention York, PA

1953 M38A1, 69248, 12/53, 20999713
MVPA# 37298

User avatar
Hartofoak
G-Major
G-Major
Posts: 937
Joined: Tue Nov 23, 2010 2:06 pm
Location: Berkshire England

Re: Tools and Spares needed for 45MB

Post by Hartofoak » Wed Dec 13, 2017 7:11 am

MB 298781 DoD: est. 01-19-44 (ex British Army 1958)
T1 Trailer: "Transportation Equipment Co."
MVMTS toolboxes & tools

Thunderbird712
G-First Lieutenant
G-First Lieutenant
Posts: 689
Joined: Sun Mar 25, 2012 11:19 am
Location: Lexington Park, MD (Southern MD)

Re: Tools and Spares needed for 45MB

Post by Thunderbird712 » Wed Dec 13, 2017 10:13 am

Those are the correct style but marked incorrectly.
TJ Zackman
1945 Willys MB, 430923, 3/28/45
Scored 98.375% at 2019 MVPA Convention York, PA

1953 M38A1, 69248, 12/53, 20999713
MVPA# 37298

Thunderbird712
G-First Lieutenant
G-First Lieutenant
Posts: 689
Joined: Sun Mar 25, 2012 11:19 am
Location: Lexington Park, MD (Southern MD)

Re: Tools and Spares needed for 45MB

Post by Thunderbird712 » Tue Jan 09, 2018 9:38 am

Still looking!
TJ Zackman
1945 Willys MB, 430923, 3/28/45
Scored 98.375% at 2019 MVPA Convention York, PA

1953 M38A1, 69248, 12/53, 20999713
MVPA# 37298


Post Reply

Return to “G503 Tools & Equipment (Vehicle & Pioneer)”

Who is online

Users browsing this forum: No registered users and 40 guests