Tools in my NAF Kennedy cantilever box
- d42jeep
- G-Brigadier General
- Posts: 2291
- Joined: Tue Feb 25, 2014 4:06 pm
- Location: Albany/Fallen Leaf Lake, CA
- Contact:
Tools in my NAF Kennedy cantilever box
This is a toolset I've put together for my own enjoyment, not worrying too much about the accuracy of every little item, although each item should appear in the NAF Class 41 catalog. I have a Surface Zero album that has images of most of the items in the set, but it is constantly changing as I find new appropriate items. Please feel free to comment or ask questions.
http://www.surfacezero.com/g503/showgal ... p?cat=4211
-Don
Items from the Navy Class 41 catalog
41-A-820 1/4" Auger Bit - Lakeside
41-A-821 5/16" Auger Bit - Irwin
41-A-822 3/8" Auger Bit - Red Devil
41-A-822 3/8" Auger Bit - Winchester
41-A-824 1/2" Auger Bit - Irwin
41-A-824 1/2" Auger Bit - Lakeside
41-A-825 9/16" Auger Bit - Irwin
41-A-826 5/8" Auger Bit - Lakeside
41-A-826 5/8" Auger Bit - Russell Jennings
41-A-828 3/4" Auger Bit - Irwin
41-A-828 3/4" Auger Bit - Russell Jennings
41-A-829 13/16" Auger Bit - Fulton
41-A-832 1" Auger Bit - Keen Kutter
41-A-832 1" Auger Bit - Stiletto
41-B-844 7/8" to 3" Expansive Bit - Unmarked
R41-A-1100 Scribing Awl - Unmarked
41-B-590 Sliding T Bevel - Stanley #25
R41-C-295 Outside Micrometer- Brown & Sharpe
41-C-342 4" Inside Caliper - Union
41-C-344 6" Inside Caliper - Starrett
41-C-352 6" Outside Caliper - Union
41-C-1114 5/8" Cold Chisel - Kraeuter #430
41-C-1120 3/4" Cold Chisel - Unmarked
41-C-2615 Countersink - Unmarked
R41-E-700 Cotter Pin Extractor - Unmarked
R41-E-960 Screw Extractor Set - Blue Point 1020
41-F-872 8" Flat 2nd Cut File - Simonds
41-F-884 8" Smooth File - Nicholson
41-F-887 12" Flat Smooth File - Simonds
41-F-928 6" Half Round Bastard File - Johnson
41-F-930 8" Half Round Bastard File - Simonds
41-F-932 10" Half Round Bastard File - Nicholson
41-F-952 8" Half Round Smooth File - Johnson
41-F-1168 8" Mill 2nd Cut File - Nucut
41-F-1170 10" Mill 2nd Cut File - Simonds
41-F-1306 10" Round Bastard File - Nicholson
41-F-1364 8" Three Square Bastard File - Heller Nucut
41-F-1572 6" Three Square Smooth File - Simonds
41-F-1574 8" Three Square Smooth File - Disston
41-F-3390 Hack Saw Frame - Union
41-G-294 Screw Pitch Gauge - Union 4 tpi to 42 tpi
41-H-122 Blacksmith's Cross Pein Hammer - Fairmount 2 lb
R41-H-235 Cellulose-Faced Hammer - Snap-on 691 1/2 lb
41-H-523 Machinist's Ball Pein Hammer - Stanley 1 lb
41-H-1116 Medium File Handle - Disston
41-I-685 Heavy Solder Iron - Unmarked
41-I-691 Medium Solder Iron - Unmarked
41-I-703 Tinner's Point - Unmarked #3
R41-K-455 Electrician's Jack Knife - Camillus R41-K-455 handle marked
41-K-546 Putty Knife - Red Devil P1-11/4S
41-N-555 7" Integral Cutter Nippers - Crescent 72 7
41-P-1598 Battery Pliers - Plomb
41-P-1631 6" Slip Joint Pliers - Cee Tee H26
41-P-1635 10" Slip Joint Pliers - Barcalo plain handles
41-P-1714 5-7/8" Diagonal Pliers - Kraeuter
R41-P-1810 Long-Nose Pliers - Kraeuter
41-P-1914 Short Round Nose Pliers - Boker
41-P-1977 8" Lineman's Pliers - Barcalo
41-P-3187 1/2" Center Punch - Williams P42
41-P-3353 1/2" Double Bow Punch - Kraeuter
41-P-3355 5/8" Double Bow Punch - Osborne
R41-P-3358 13/16" Double Bow Punch - Kraeuter
41-P-3601 3/32" Drive Pin Punch - Starrett 4"
41-P-3602 1/8" Drive Pin Punch - Mayhew 4"
41-P-3604 3/16" Drive Pin Punch - Mayhew 4"
41-P-3606 1/4" Drive Pin Punch - Mayhew 4"
41-P-3620 1/8" Extra Long Punch - Starrett 8"
41-P-3622 1/4" Extra Long Punch - Starrett 8"
41-P-3623 5/16" Extra Long Punch - Starrett 8"
41-P-3624 3/8" Extra Long Punch - Starrett 8"
41-P-3640 Drive Pin Punch 1/8" - Starrett 4"
41-R-2992 12" Steel Rule - Starrett
R41-S-1170 #1 Phillips - Stanley
R41-S-1172 #2 Phillips - Stanley
R41-S-1176 #4 Phillips - Plomb 9788
R41-S-1400 5-1/4" Offset Screwdriver - Bridgeport
41-S-2030 Scriber - General
41-S-2176 3/32" Nail Set - Stanley
41-S-2177 1/8" Nail Set - Union
41-S-4527 Square, Machinists' and carpenters', combination, 12" - Stanley No 21
41-W-484 4" Adjustable wrench - Danielson Bet'r Grip
41-W-485 6" Adjustable wrench - Diamond
41-W-486 8" Adjustable wrench - Diamond FSN marked
41-W-487 10" Adjustable wrench - Danielson Bet'r Grip 1944
41-W-488 12" Adjustable wrench - Williams
R41-W-506 11" Auto wrench - Diamond NAF 1106-4
41-W-597 5/16" X 3/8" DBE Wrench - Vlchek
R41-W-614 1-1/4" X 1-7/16" DBE wrench - Plomb 1161
R41-W-745 3/8" drive 9/16" Crowfoot - Plomb
41-W-1012 3/4" X 13/16" DOE wrench - Barcalo 1731
R41-W-1392 5/64" Allen wrench - Allen
R41-W-1397 3/32" Allen wrench - Unbrako
R41-W-1400 3/16" Allen wrench - Allen
R41-W-1402 5/16" Allen wrench - Allen
R41-W-1406 1/4" Allen wrench - Allen
R41-W-1408 1/8" Allen wrench - Unbrako
R41-W-1410 5/32" Allen wrench - Unbrako
R41-W-1412 7/32" Allen wrench - Allen
R41-W-1414 3/8" Allen wrench - Allen
R41-W-14xx 7/16" Allen wrench - Unbrako
R41-W-1416 1/2" Allen wrench - Allen
R41-W-1418 5/8" Allen wrench - CR
R41-W-1565 3/8" Combination wrench - Plomb 1212
R41-W-1573 5/8" Combination wrench - Vlchek
R41-W-1577 3/4" Combination wrench - Plomb 1224
R41-W-1579 13/16" Combination wrench - Plomb NAF 1147-13
41-W-1650 6" Normal Duty Pipe Wrench - Walco
41-W-1651 8" Normal Duty Pipe Wrench - Walco
41-W-1660 6" HD Pipe Wrench - Ridgid
41-W-1662 10" HD Pipe Wrench - Ridgid
41-W-1663 14" HD Pipe Wrench - Ridgid
41-W-1664 18" HD Pipe Wrench - Ridgid
41-W-2352 10" Monkey wrench - Pexto metal handle
R41-W-2967 - Walden 1/4" drive socket set
41-W-2970 3/16" 1/4" drive socket - D-I
R41-W-2996-10 1/4" Double Square socket 1/4" drive - D-I
R41-W-2996-12 5/16" Double Square socket 1/4" drive - D-I
41-W-2997 Socket Wrench Set - Duro Chrome D-I socket set
41-W-3001 5/16" 12 Point socket 3/8" drive - Duro Chrome
41-W-3003 3/8" 12 Point socket 3/8" drive - Duro Chrome
R41-W-3033 3" 3/8" drive extension - Williams
R41-W-3033-2 6" 3/8" drive extension - Plomb
R41-W-3033-24 7/16" 12 Point 3/8" drive - D-I
R41-W-3033-26 1/2" 12 Point 3/8" drive - D-I
R41-W-3033-28 9/16" 12 Point 3/8" drive - D-I
R41-W-3033-30 5/8" 12 Point 3/8" drive - D-I
R41-W-3033-34 3/4" 12 Point 3/8" drive - Plomb
41-W-3585 13/16" X 7/8" Tappet wrench - Duro Circle DC 4A
http://www.surfacezero.com/g503/showgal ... p?cat=4211
-Don
Items from the Navy Class 41 catalog
41-A-820 1/4" Auger Bit - Lakeside
41-A-821 5/16" Auger Bit - Irwin
41-A-822 3/8" Auger Bit - Red Devil
41-A-822 3/8" Auger Bit - Winchester
41-A-824 1/2" Auger Bit - Irwin
41-A-824 1/2" Auger Bit - Lakeside
41-A-825 9/16" Auger Bit - Irwin
41-A-826 5/8" Auger Bit - Lakeside
41-A-826 5/8" Auger Bit - Russell Jennings
41-A-828 3/4" Auger Bit - Irwin
41-A-828 3/4" Auger Bit - Russell Jennings
41-A-829 13/16" Auger Bit - Fulton
41-A-832 1" Auger Bit - Keen Kutter
41-A-832 1" Auger Bit - Stiletto
41-B-844 7/8" to 3" Expansive Bit - Unmarked
R41-A-1100 Scribing Awl - Unmarked
41-B-590 Sliding T Bevel - Stanley #25
R41-C-295 Outside Micrometer- Brown & Sharpe
41-C-342 4" Inside Caliper - Union
41-C-344 6" Inside Caliper - Starrett
41-C-352 6" Outside Caliper - Union
41-C-1114 5/8" Cold Chisel - Kraeuter #430
41-C-1120 3/4" Cold Chisel - Unmarked
41-C-2615 Countersink - Unmarked
R41-E-700 Cotter Pin Extractor - Unmarked
R41-E-960 Screw Extractor Set - Blue Point 1020
41-F-872 8" Flat 2nd Cut File - Simonds
41-F-884 8" Smooth File - Nicholson
41-F-887 12" Flat Smooth File - Simonds
41-F-928 6" Half Round Bastard File - Johnson
41-F-930 8" Half Round Bastard File - Simonds
41-F-932 10" Half Round Bastard File - Nicholson
41-F-952 8" Half Round Smooth File - Johnson
41-F-1168 8" Mill 2nd Cut File - Nucut
41-F-1170 10" Mill 2nd Cut File - Simonds
41-F-1306 10" Round Bastard File - Nicholson
41-F-1364 8" Three Square Bastard File - Heller Nucut
41-F-1572 6" Three Square Smooth File - Simonds
41-F-1574 8" Three Square Smooth File - Disston
41-F-3390 Hack Saw Frame - Union
41-G-294 Screw Pitch Gauge - Union 4 tpi to 42 tpi
41-H-122 Blacksmith's Cross Pein Hammer - Fairmount 2 lb
R41-H-235 Cellulose-Faced Hammer - Snap-on 691 1/2 lb
41-H-523 Machinist's Ball Pein Hammer - Stanley 1 lb
41-H-1116 Medium File Handle - Disston
41-I-685 Heavy Solder Iron - Unmarked
41-I-691 Medium Solder Iron - Unmarked
41-I-703 Tinner's Point - Unmarked #3
R41-K-455 Electrician's Jack Knife - Camillus R41-K-455 handle marked
41-K-546 Putty Knife - Red Devil P1-11/4S
41-N-555 7" Integral Cutter Nippers - Crescent 72 7
41-P-1598 Battery Pliers - Plomb
41-P-1631 6" Slip Joint Pliers - Cee Tee H26
41-P-1635 10" Slip Joint Pliers - Barcalo plain handles
41-P-1714 5-7/8" Diagonal Pliers - Kraeuter
R41-P-1810 Long-Nose Pliers - Kraeuter
41-P-1914 Short Round Nose Pliers - Boker
41-P-1977 8" Lineman's Pliers - Barcalo
41-P-3187 1/2" Center Punch - Williams P42
41-P-3353 1/2" Double Bow Punch - Kraeuter
41-P-3355 5/8" Double Bow Punch - Osborne
R41-P-3358 13/16" Double Bow Punch - Kraeuter
41-P-3601 3/32" Drive Pin Punch - Starrett 4"
41-P-3602 1/8" Drive Pin Punch - Mayhew 4"
41-P-3604 3/16" Drive Pin Punch - Mayhew 4"
41-P-3606 1/4" Drive Pin Punch - Mayhew 4"
41-P-3620 1/8" Extra Long Punch - Starrett 8"
41-P-3622 1/4" Extra Long Punch - Starrett 8"
41-P-3623 5/16" Extra Long Punch - Starrett 8"
41-P-3624 3/8" Extra Long Punch - Starrett 8"
41-P-3640 Drive Pin Punch 1/8" - Starrett 4"
41-R-2992 12" Steel Rule - Starrett
R41-S-1170 #1 Phillips - Stanley
R41-S-1172 #2 Phillips - Stanley
R41-S-1176 #4 Phillips - Plomb 9788
R41-S-1400 5-1/4" Offset Screwdriver - Bridgeport
41-S-2030 Scriber - General
41-S-2176 3/32" Nail Set - Stanley
41-S-2177 1/8" Nail Set - Union
41-S-4527 Square, Machinists' and carpenters', combination, 12" - Stanley No 21
41-W-484 4" Adjustable wrench - Danielson Bet'r Grip
41-W-485 6" Adjustable wrench - Diamond
41-W-486 8" Adjustable wrench - Diamond FSN marked
41-W-487 10" Adjustable wrench - Danielson Bet'r Grip 1944
41-W-488 12" Adjustable wrench - Williams
R41-W-506 11" Auto wrench - Diamond NAF 1106-4
41-W-597 5/16" X 3/8" DBE Wrench - Vlchek
R41-W-614 1-1/4" X 1-7/16" DBE wrench - Plomb 1161
R41-W-745 3/8" drive 9/16" Crowfoot - Plomb
41-W-1012 3/4" X 13/16" DOE wrench - Barcalo 1731
R41-W-1392 5/64" Allen wrench - Allen
R41-W-1397 3/32" Allen wrench - Unbrako
R41-W-1400 3/16" Allen wrench - Allen
R41-W-1402 5/16" Allen wrench - Allen
R41-W-1406 1/4" Allen wrench - Allen
R41-W-1408 1/8" Allen wrench - Unbrako
R41-W-1410 5/32" Allen wrench - Unbrako
R41-W-1412 7/32" Allen wrench - Allen
R41-W-1414 3/8" Allen wrench - Allen
R41-W-14xx 7/16" Allen wrench - Unbrako
R41-W-1416 1/2" Allen wrench - Allen
R41-W-1418 5/8" Allen wrench - CR
R41-W-1565 3/8" Combination wrench - Plomb 1212
R41-W-1573 5/8" Combination wrench - Vlchek
R41-W-1577 3/4" Combination wrench - Plomb 1224
R41-W-1579 13/16" Combination wrench - Plomb NAF 1147-13
41-W-1650 6" Normal Duty Pipe Wrench - Walco
41-W-1651 8" Normal Duty Pipe Wrench - Walco
41-W-1660 6" HD Pipe Wrench - Ridgid
41-W-1662 10" HD Pipe Wrench - Ridgid
41-W-1663 14" HD Pipe Wrench - Ridgid
41-W-1664 18" HD Pipe Wrench - Ridgid
41-W-2352 10" Monkey wrench - Pexto metal handle
R41-W-2967 - Walden 1/4" drive socket set
41-W-2970 3/16" 1/4" drive socket - D-I
R41-W-2996-10 1/4" Double Square socket 1/4" drive - D-I
R41-W-2996-12 5/16" Double Square socket 1/4" drive - D-I
41-W-2997 Socket Wrench Set - Duro Chrome D-I socket set
41-W-3001 5/16" 12 Point socket 3/8" drive - Duro Chrome
41-W-3003 3/8" 12 Point socket 3/8" drive - Duro Chrome
R41-W-3033 3" 3/8" drive extension - Williams
R41-W-3033-2 6" 3/8" drive extension - Plomb
R41-W-3033-24 7/16" 12 Point 3/8" drive - D-I
R41-W-3033-26 1/2" 12 Point 3/8" drive - D-I
R41-W-3033-28 9/16" 12 Point 3/8" drive - D-I
R41-W-3033-30 5/8" 12 Point 3/8" drive - D-I
R41-W-3033-34 3/4" 12 Point 3/8" drive - Plomb
41-W-3585 13/16" X 7/8" Tappet wrench - Duro Circle DC 4A
- Attachments
-
- Kennedy cantilever box
- IMG_5701.JPG (123.05 KiB) Viewed 15557 times
-
- IMG_5702.JPG (142.2 KiB) Viewed 15557 times
-
- IMG_5716.JPG (191.72 KiB) Viewed 15557 times
-
- R41-E-960
- IMG_5700.JPG (152.2 KiB) Viewed 15557 times
-
- IMG_5699.JPG (167.21 KiB) Viewed 15557 times
-
- IMG_5698.JPG (233.44 KiB) Viewed 15557 times
-
- R41-E-960
- IMG_5696.JPG (182.41 KiB) Viewed 15557 times
-
- IMG_5693.JPG (132.3 KiB) Viewed 15557 times
Last edited by d42jeep on Fri Sep 22, 2017 10:25 pm, edited 3 times in total.
Ford GPW 76344 DOD 11/42 Built in Richmond, CA
- d42jeep
- G-Brigadier General
- Posts: 2291
- Joined: Tue Feb 25, 2014 4:06 pm
- Location: Albany/Fallen Leaf Lake, CA
- Contact:
Re: Tools in my NAF Kennedy cantilever box
More pictures.
- Attachments
-
- IMG_5720.JPG (118.94 KiB) Viewed 15556 times
-
- IMG_5719.JPG (197.74 KiB) Viewed 15556 times
-
- IMG_5718.JPG (44.82 KiB) Viewed 15556 times
-
- IMG_5715.JPG (132.3 KiB) Viewed 15556 times
-
- IMG_5704.JPG (218.18 KiB) Viewed 15556 times
-
- IMG_5703.JPG (140.89 KiB) Viewed 15556 times
-
- IMG_5714.JPG (140.12 KiB) Viewed 15556 times
-
- IMG_5705.JPG (121.23 KiB) Viewed 15556 times
-
- IMG_5697.JPG (110.8 KiB) Viewed 15556 times
Ford GPW 76344 DOD 11/42 Built in Richmond, CA
- d42jeep
- G-Brigadier General
- Posts: 2291
- Joined: Tue Feb 25, 2014 4:06 pm
- Location: Albany/Fallen Leaf Lake, CA
- Contact:
Re: Tools in my NAF Kennedy cantilever box
Even more pictures.
- Attachments
-
- IMG_5726.JPG (160.59 KiB) Viewed 15551 times
-
- R41-W-506
- IMG_5725.JPG (155.95 KiB) Viewed 15551 times
-
- R41-W-506
- IMG_5724.JPG (147.96 KiB) Viewed 15551 times
-
- R41-W-506
- IMG_5723.JPG (140.6 KiB) Viewed 15551 times
-
- IMG_5722.JPG (167.45 KiB) Viewed 15554 times
-
- IMG_5721.JPG (72.34 KiB) Viewed 15554 times
-
- IMG_5715.JPG (132.3 KiB) Viewed 15554 times
-
- R41-P-3358
- IMG_5706.JPG (139.53 KiB) Viewed 15554 times
-
- 41-w-2997
- IMG_5695.JPG (135.73 KiB) Viewed 15554 times
Last edited by d42jeep on Fri Sep 22, 2017 6:45 pm, edited 2 times in total.
Ford GPW 76344 DOD 11/42 Built in Richmond, CA
- mudbox
- G-Colonel
- Posts: 1526
- Joined: Wed Oct 27, 2010 3:09 pm
- Location:
Re: Tools in my NAF Kennedy cantilever box
Neat collection!
Just about need a crane truck to pick that thing up off the ground!
Any idea on total weight?
-Jason
Just about need a crane truck to pick that thing up off the ground!
Any idea on total weight?
-Jason
- d42jeep
- G-Brigadier General
- Posts: 2291
- Joined: Tue Feb 25, 2014 4:06 pm
- Location: Albany/Fallen Leaf Lake, CA
- Contact:
Re: Tools in my NAF Kennedy cantilever box
I think I would have to take it to the truck scales. I can still drag it along the ground!
-Don
-Don
Ford GPW 76344 DOD 11/42 Built in Richmond, CA
- Wingnutt
- G-Lieutenant General
- Posts: 5029
- Joined: Mon Oct 24, 2011 1:17 pm
- Location:
Re: Tools in my NAF Kennedy cantilever box
Dang, Don, you've gotten some mileage out of that Class 41!!
Neat idea!
Neat idea!
TEMPORARY DUTY
- d42jeep
- G-Brigadier General
- Posts: 2291
- Joined: Tue Feb 25, 2014 4:06 pm
- Location: Albany/Fallen Leaf Lake, CA
- Contact:
Re: Tools in my NAF Kennedy cantilever box
Well, it's actually all your fault for scanning the darn thing in the first place!
-Don
-Don
- Attachments
-
- IMG_5728.JPG (132.18 KiB) Viewed 15542 times
-
- IMG_5727.JPG (90.32 KiB) Viewed 15542 times
Ford GPW 76344 DOD 11/42 Built in Richmond, CA
-
- G-Lieutenant General
- Posts: 6808
- Joined: Fri Dec 13, 2002 5:05 pm
- Location: Patagonia, AZ EIEIO
Re: Tools in my NAF Kennedy cantilever box
I think I'll just screen-print these images and stick them in my box... . Seriously dedicated work Don. Great job.
Jeff Q.
Curator, AZ Empty Aviation Tool Box Museum (annex)
Jeff Q.
Curator, AZ Empty Aviation Tool Box Museum (annex)
- d42jeep
- G-Brigadier General
- Posts: 2291
- Joined: Tue Feb 25, 2014 4:06 pm
- Location: Albany/Fallen Leaf Lake, CA
- Contact:
Re: Tools in my NAF Kennedy cantilever box
Thanks, Jeff! It was fun to go through that catalog and try to find matching tools.
-Don
-Don
Ford GPW 76344 DOD 11/42 Built in Richmond, CA
- Wingnutt
- G-Lieutenant General
- Posts: 5029
- Joined: Mon Oct 24, 2011 1:17 pm
- Location:
Re: Tools in my NAF Kennedy cantilever box
The only NAF marked tool I have is the Diamond auto wrench, which I know you already have. But, I've got several Bonney tools dual-marked with "WRIGHT" (Aeronautical) and WRIGHT (Aeronautical) part numbers as well as a few dual marked "PWA" with "PWA" part numbers. They're not NAF, per se, but they're definitely Aviation! Let me know if you're interested.
TEMPORARY DUTY
- Gordon_M
- G-Colonel
- Posts: 1840
- Joined: Thu Feb 26, 2004 9:32 am
- Location: central and north east Scotland, depending on the day
Re: Tools in my NAF Kennedy cantilever box
I really want to know how much that weighs in total. Surely there has to be a limit as to what you can put on one of those handles.
Wheels, we need wheels. Probably have to put the empty box into the back of a jeep and just load it up in place.
Wheels, we need wheels. Probably have to put the empty box into the back of a jeep and just load it up in place.
Gordon
1941 Highway Trailer K-38
1944 Iron Fireman T-36 Snow Tractor
1986 Nolan Road/Rail trailer
1941 Highway Trailer K-38
1944 Iron Fireman T-36 Snow Tractor
1986 Nolan Road/Rail trailer
- d42jeep
- G-Brigadier General
- Posts: 2291
- Joined: Tue Feb 25, 2014 4:06 pm
- Location: Albany/Fallen Leaf Lake, CA
- Contact:
Re: Tools in my NAF Kennedy cantilever box
When I get back to the Bay Area in a couple of weeks I will weigh it and report back. I have lifted it a couple of inches with the handle, albeit nervously, but the handle seems strong enough to handle it. It's definitely heavier than a GMTK.
-Don
-Don
- Attachments
-
- Wheels for Gordon
- IMG_5814.JPG (184.17 KiB) Viewed 15396 times
Last edited by d42jeep on Wed Sep 27, 2017 2:10 am, edited 1 time in total.
Ford GPW 76344 DOD 11/42 Built in Richmond, CA
- pjones
- G-Major General
- Posts: 2793
- Joined: Wed Jan 05, 2011 1:26 pm
- Location: East Tennessee
Re: Tools in my NAF Kennedy cantilever box
Don,
That is an amazing set you have put together. And what a great way to display items from the Class 41. I've said it before but you are my retirement inspiration! Thanks for sharing.
phil
That is an amazing set you have put together. And what a great way to display items from the Class 41. I've said it before but you are my retirement inspiration! Thanks for sharing.
phil
pjones
'42 Ford GPW 7127
Need a MVMTS/GMTK?
Need a jeep toolkit?
'42 Ford GPW 7127
Need a MVMTS/GMTK?
Need a jeep toolkit?
- d42jeep
- G-Brigadier General
- Posts: 2291
- Joined: Tue Feb 25, 2014 4:06 pm
- Location: Albany/Fallen Leaf Lake, CA
- Contact:
Re: Tools in my NAF Kennedy cantilever box
Thanks for the kudos, Phil. I found a few items from the catalog that won't fit in the toolbox such as these bolt cutters.
-Don
-Don
- Attachments
-
- 1913 Porter ad
- IMG_5810.JPG (115.62 KiB) Viewed 15427 times
-
- IMG_5809.JPG (119.11 KiB) Viewed 15427 times
-
- IMG_5808.JPG (66.68 KiB) Viewed 15427 times
-
- IMG_5807.JPG (141.65 KiB) Viewed 15427 times
Ford GPW 76344 DOD 11/42 Built in Richmond, CA
- Hartofoak
- G-Major
- Posts: 937
- Joined: Tue Nov 23, 2010 2:06 pm
- Location: Berkshire England
Re: Tools in my NAF Kennedy cantilever box
Great idea Don and wonderful photos. I've been moving my MVMTS/GMTS boxes around the garage with a "Warehouse Truck" 69-T-1906!
MB 298781 DoD: est. 01-19-44 (ex British Army 1958)
T1 Trailer: "Transportation Equipment Co."
MVMTS toolboxes & tools
T1 Trailer: "Transportation Equipment Co."
MVMTS toolboxes & tools
Who is online
Users browsing this forum: No registered users and 60 guests