How to repair a MB/GPW fuel gauge. Lots of pics
-
- G-Master Sergeant
- Posts: 113
- Joined: Mon Apr 03, 2006 4:58 pm
- Location: La Grande, OR
Re: How to repair a MB/GPW fuel gauge. Lots of pics
Correction: Unit does function now, probably the result of cleaning up the posts and improving connectivity. Battery test did help to know the unit itself was not at fault, so may be a useful tool. Certainly this sticky has been invaluable to many of us. Thanks, Elwood, Sean, and others!
Steve
Steve
-
- G-First Sergeant
- Posts: 141
- Joined: Sun Sep 20, 2009 7:31 pm
- Location: Perth, Western Australia
Re: How to repair a MB/GPW fuel gauge. Lots of pics
Hello Elwood -
I'm a first time forum user, so please be gentle with me.
I am trying to get my fuel gauge to work and your sticky is very informative.
My gauge us showing the exact same sytmptoms as Marcel Brands but unfortunately I cannot find your reply to his questions.
What am I doing wrong?
Any help would be greatly appreciated.
Cheers
Mark
I'm a first time forum user, so please be gentle with me.
I am trying to get my fuel gauge to work and your sticky is very informative.
My gauge us showing the exact same sytmptoms as Marcel Brands but unfortunately I cannot find your reply to his questions.
What am I doing wrong?
Any help would be greatly appreciated.
Cheers
Mark
1944 Willys MB #336328 "Charlotte"
-
- G-First Lieutenant
- Posts: 656
- Joined: Sun Jul 12, 2009 2:25 am
- Location: Sydney, Australia
Re: How to repair a MB/GPW fuel gauge. Lots of pics
Thanks for an interesting post. I have a related question. My jeep has a NOS Stewart Warner fuel gauge. I have just installed a repro tank sender unit and the gauge works well. Only issue now - there is what appears to be an oily type smear appearing on the inside of the gauge glass. I assume this must be some of the original lubricant leaching out now the gauge is working. I would appreciate any further advice on what this could be and how to remidy without damaging the gauge. thanks
- Chuck Lutz
- Gee Addict
- Posts: 26829
- Joined: Wed Jun 28, 2006 7:00 am
- Location: Jeep Heaven
Re: How to repair a MB/GPW fuel gauge. Lots of pics
That might be condensation forming inside the glass face.
Chuck Lutz
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
GPW 17963 4/24/42 Chester, PA. USA 20113473 (USA est./Tom W.)
Bantam T3-C 1947
- kjm
- G-Sergeant Major
- Posts: 160
- Joined: Wed Feb 14, 2007 3:13 pm
- Location:
Re: How to repair a MB/GPW fuel gauge. Lots of pics
Hello,
Can you tell me what to do if my fuel gauge moves around when I'm driving?
Thank you, Kjm
Can you tell me what to do if my fuel gauge moves around when I'm driving?
Thank you, Kjm
- jeepmb
- G-Command Sergeant Major
- Posts: 211
- Joined: Mon Oct 08, 2007 4:37 am
- Location: Milan - Italy
Re: How to repair a MB/GPW fuel gauge. Lots of pics
Hello ElwoodJBlues,
Thanks so much for your sticky note!!!
Best Regards,
Luigi
Thanks so much for your sticky note!!!
Best Regards,
Luigi
- Benleroy
- G-Major
- Posts: 889
- Joined: Sun Nov 18, 2007 1:26 pm
- Location: Liège, Belgium
- Contact:
Re: How to repair a MB/GPW fuel gauge. Lots of pics
Dont drirekjm wrote:Hello,
Can you tell me what to do if my fuel gauge moves around when I'm driving?
Thank you, Kjm
It's a problem of mass.
-
- G-First Lieutenant
- Posts: 654
- Joined: Thu Oct 07, 2010 9:36 pm
- Location:
Re: How to repair a MB/GPW fuel gauge. Lots of pics
Stop until the needle settles, and attempt to drive again. Should it resume swinging, ignore it till the funny sound under the hood stops, and the fill up with gas.kjm wrote:Hello,
Can you tell me what to do if my fuel gauge moves around when I'm driving?
Thank you, Kjm
-
- G-Major
- Posts: 999
- Joined: Mon Jun 02, 2003 2:11 pm
- Location: Orange County, CA
Re: How to repair a MB/GPW fuel gauge. Lots of pics
Need some help.
I have a 12V gauge and sending unit. All I get is a full reading. I checked the sending unit and I do get a range of resistance from low to high setting (sorry, I do not remember the values). The gauge is rebuilt by Sean Elliot and I am assuming works correctly. In reading the posts, everyone is checking the gauge post to ground value. Does this matter? Does the gauge need to be grounded to work properly? I know the sending unit needs to have proper ground but why the gauge? Isn't the gauge a simple resistance meter?
Any help would be appreciated.
So close with my restoration but so far!
Donovan.
I have a 12V gauge and sending unit. All I get is a full reading. I checked the sending unit and I do get a range of resistance from low to high setting (sorry, I do not remember the values). The gauge is rebuilt by Sean Elliot and I am assuming works correctly. In reading the posts, everyone is checking the gauge post to ground value. Does this matter? Does the gauge need to be grounded to work properly? I know the sending unit needs to have proper ground but why the gauge? Isn't the gauge a simple resistance meter?
Any help would be appreciated.
So close with my restoration but so far!
Donovan.
GPA 11374
-
- G-Lieutenant General
- Posts: 6319
- Joined: Thu Mar 09, 2006 10:34 am
- Location:
Re: How to repair a MB/GPW fuel gauge. Lots of pics
The original guage grounds through the case to the dash, it's important that it has a good connection or the reading will be incorrect. Some aftermarket guages have a third stud for the ground which makes getting a good ground easy.
43 Ford GPW 92098
53 Dunbar Kapple M100
Sold: 61 CJ-5, 41 T207 WC-1 Dodge closed cab pickup
MVPA #8266
USMC Tanker (1811, 1812), 85-93
ASE Automotive Master tech, former Chrysler-Jeep Level 4 Mastertech, CA state EA smog license
53 Dunbar Kapple M100
Sold: 61 CJ-5, 41 T207 WC-1 Dodge closed cab pickup
MVPA #8266
USMC Tanker (1811, 1812), 85-93
ASE Automotive Master tech, former Chrysler-Jeep Level 4 Mastertech, CA state EA smog license
- Eddie Holland
- G-Colonel
- Posts: 1582
- Joined: Sat Nov 29, 2003 4:22 am
- Location: Calvert City Kentucky
Re: How to repair a MB/GPW fuel gauge. Lots of pics
does anyone know if there is a source for replacment benzels and gauge faces or even stickers to replace the gauge faces?
42 GPW 12/30/42 Matching #'s 88,638 being restored
Restoring
M-151 Ford
M-151-A1 Ford
M-151-A2 AMG restored
2 M-416 restored
restoring 2 M-100s
Restoring
M-151 Ford
M-151-A1 Ford
M-151-A2 AMG restored
2 M-416 restored
restoring 2 M-100s
- kjm
- G-Sergeant Major
- Posts: 160
- Joined: Wed Feb 14, 2007 3:13 pm
- Location:
Re: How to repair a MB/GPW fuel gauge. Lots of pics
Hello,
Nice job on the gauge, Can you tell me what would make the needle jump or move when driving?
Thanks
Nice job on the gauge, Can you tell me what would make the needle jump or move when driving?
Thanks
- ElwoodJayBlues
- Bluesman of the Gee
- Posts: 4992
- Joined: Wed Nov 12, 2003 6:18 am
- Location: Aschaffenburg- Germany
- Contact:
Re: How to repair a MB/GPW fuel gauge. Lots of pics
The needle on these gauges will always be jumping and moving.
It will even move when you rock the jeep by hand.
They're not compairable to modern fuel gauges.
So if the gauge works when the jeep stands absolutely still, you're fine!
EJB
It will even move when you rock the jeep by hand.
They're not compairable to modern fuel gauges.
So if the gauge works when the jeep stands absolutely still, you're fine!
EJB
MB 134202, stamped grill, script back
"Lili Marlene"
"Vor der Kaserne, vor dem großen Tor..."
"Lili Marlene"
"Vor der Kaserne, vor dem großen Tor..."
- kjm
- G-Sergeant Major
- Posts: 160
- Joined: Wed Feb 14, 2007 3:13 pm
- Location:
Re: How to repair a MB/GPW fuel gauge. Lots of pics
OK, Thank you,
Kip
Kip
- YLG80
- G-Lieutenant General
- Posts: 4095
- Joined: Fri Aug 05, 2011 9:45 am
- Location: near Namur, Belgium
- Contact:
Re: How to repair a MB/GPW fuel gauge. Lots of pics
Thanks to ElwoodJayBlues for sharing his method to repair a fuel gauge
I have successfully repaired my original gauge thanks to him.
A coil wire was cut on the IGN post.
As I had the complete fuel gauge installation on my electronic workbench (fuel sender wired to the gauge and a lab power supply (6V) ),
I’ve fully tested the assembly and slightly adjusted the gauge needle deviation.
With the gauge type repaired using ElwoodJayBlues method, it is possible to adjust the needle full deviation by bending a soft iron blade. (see picture)
If you bend the blade, sticking it to the coil, you will increase the iron loss in the magnetic circuit wich will in turn reduce the needle deviation.
You have to carefully adjust that blade so that the needle will still move back to the zero (empty tank) stop.
This is sometimes usefull, as the needle hits the FULL tank stop violently when you switch the starter switch ON with a tank full of gas.
I could see the shock traces on the needle in my gauge.
Depending upon the fuel sender resistor, my gauge needle was not fully returning to the zero stop with an empty tank.
This can also be adjusted.
In fact the instrument behaves as an ammeter connected within a measurement bridge.
If you connect a parallel resistor of a low value between the two posts, you will reduce the instrument sensitivity.
With my gauge, I connected a 39 ohm resistor between the two posts, so that the needle deviation was OK and soft between the EMPTY stop and the FULL stop.
Depending on you sender resistor value from min to max, you would have to use another resistor value close to 39 ohm.
The next picture shows you how to connect the resistor. It’s better to connect the resistor externally, so that if you change your fuel sender you can remove or change the resistor value.
For those questioning themselves on why the needle is jumping and moving all the time, this is normal.
In that type of gauge, there is no spiral spring around the needle to absorb the shocks or vibrations.
The needle is driven by the magnetic field balance between two coils.
This a fragile balance easily broken by the needle weight and inertia.
Yves
I have successfully repaired my original gauge thanks to him.
A coil wire was cut on the IGN post.
As I had the complete fuel gauge installation on my electronic workbench (fuel sender wired to the gauge and a lab power supply (6V) ),
I’ve fully tested the assembly and slightly adjusted the gauge needle deviation.
With the gauge type repaired using ElwoodJayBlues method, it is possible to adjust the needle full deviation by bending a soft iron blade. (see picture)
If you bend the blade, sticking it to the coil, you will increase the iron loss in the magnetic circuit wich will in turn reduce the needle deviation.
You have to carefully adjust that blade so that the needle will still move back to the zero (empty tank) stop.
This is sometimes usefull, as the needle hits the FULL tank stop violently when you switch the starter switch ON with a tank full of gas.
I could see the shock traces on the needle in my gauge.
Depending upon the fuel sender resistor, my gauge needle was not fully returning to the zero stop with an empty tank.
This can also be adjusted.
In fact the instrument behaves as an ammeter connected within a measurement bridge.
If you connect a parallel resistor of a low value between the two posts, you will reduce the instrument sensitivity.
With my gauge, I connected a 39 ohm resistor between the two posts, so that the needle deviation was OK and soft between the EMPTY stop and the FULL stop.
Depending on you sender resistor value from min to max, you would have to use another resistor value close to 39 ohm.
The next picture shows you how to connect the resistor. It’s better to connect the resistor externally, so that if you change your fuel sender you can remove or change the resistor value.
For those questioning themselves on why the needle is jumping and moving all the time, this is normal.
In that type of gauge, there is no spiral spring around the needle to absorb the shocks or vibrations.
The needle is driven by the magnetic field balance between two coils.
This a fragile balance easily broken by the needle weight and inertia.
Yves
Ford GPW 1943 - Louisville - DoD 12-7-43
serial 164794
serial 164794
Who is online
Users browsing this forum: maurywhurt, MB210581, Scrumps and 90 guests