WTK: Fired TOW Training Rocket Body?
- Falldownjaeger
- Sergeant Major of the Gee
- Posts: 347
- Joined: Fri Dec 18, 2009 1:19 pm
- Location: FL, USA
WTK: Fired TOW Training Rocket Body?
Like it says, fired training round with the inert warhead for training 11Hs, no shipping tube. Sorta outside my 11C lane, doesn't really fit in with M1081 LVAD "War Pig" Gun Truck.
1995 M1025A2 Orig 5SFG GMV ODA525 "Hammerhead"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
-
- G-Captain
- Posts: 799
- Joined: Sat Feb 11, 2006 11:37 am
- Location: So.Cal
Re: WTK: Fired TOW Training Rocket Body?
Do you have one for sale?
Your post is a bit confusing.
Not sure what you want to know.
Value ? price? or where to find.
If your selling one I might be interested in it . I'd be interested in seeing a few pictures of it
UC
Your post is a bit confusing.
Not sure what you want to know.
Value ? price? or where to find.
If your selling one I might be interested in it . I'd be interested in seeing a few pictures of it
UC
- W. Winget
- LTC, U.S. Army
- Posts: 4448
- Joined: Mon Dec 16, 2002 10:37 am
- Location: USA, Virginia, Carrollton
- Contact:
Re: WTK: Fired TOW Training Rocket Body?
How dented is it?
Location (East Coast/West Coast...Germany?)
I have a complete TOW setup on my M825 MUTT, (see my avatar) with a TOW carrier jeep in progress and would love to add one that's in fairly good shape to display at setups, but if it's overseas or across Country shipping would be a real bear and if overseas customs would typically choke.
If you do end up shipping it to somone, I would recommend putting it in a carpet roll tube (rug store maybe) or if you can source an expended TOW tube, but you'd have to reset the fins (assuming it has some) in the closed position, and that isn't super easy, but can be done.
V/R W. Winget
Virginia
Location (East Coast/West Coast...Germany?)
I have a complete TOW setup on my M825 MUTT, (see my avatar) with a TOW carrier jeep in progress and would love to add one that's in fairly good shape to display at setups, but if it's overseas or across Country shipping would be a real bear and if overseas customs would typically choke.
If you do end up shipping it to somone, I would recommend putting it in a carpet roll tube (rug store maybe) or if you can source an expended TOW tube, but you'd have to reset the fins (assuming it has some) in the closed position, and that isn't super easy, but can be done.
V/R W. Winget
Virginia
Looking for 1918 Standard B 'Liberty' truck parts
- Falldownjaeger
- Sergeant Major of the Gee
- Posts: 347
- Joined: Fri Dec 18, 2009 1:19 pm
- Location: FL, USA
Re: WTK: Fired TOW Training Rocket Body?
Item coming from Colorado.
Also M416A1 1/4t Trailer with surge brakes.
Also M416A1 1/4t Trailer with surge brakes.
1995 M1025A2 Orig 5SFG GMV ODA525 "Hammerhead"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
- Falldownjaeger
- Sergeant Major of the Gee
- Posts: 347
- Joined: Fri Dec 18, 2009 1:19 pm
- Location: FL, USA
Re: WTK: Fired TOW Training Rocket Body?
https://www.facebook.com/pg/AdlerArmory ... 7278049335
The nosecone aluminum sheetmetal is thin enough to tap out dent over mandrel with small bodywork hammer or even filling with water then freezing multiple times to push out dent. Needs all 4 tail fins but the fin attachment point hinges/springs are there, remove with phillips screwdriver then make new fins from 3/16" alu flat bar with angle grinder and shark wheels.
The nosecone aluminum sheetmetal is thin enough to tap out dent over mandrel with small bodywork hammer or even filling with water then freezing multiple times to push out dent. Needs all 4 tail fins but the fin attachment point hinges/springs are there, remove with phillips screwdriver then make new fins from 3/16" alu flat bar with angle grinder and shark wheels.
1995 M1025A2 Orig 5SFG GMV ODA525 "Hammerhead"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
-
- G-Captain
- Posts: 799
- Joined: Sat Feb 11, 2006 11:37 am
- Location: So.Cal
Re: WTK: Fired TOW Training Rocket Body?
Email sent
Who is online
Users browsing this forum: skipdip216 and 49 guests