I have access to a CNC plasma cutter. I have used it for about 10 years. Recently the idea came to me to program a few gun silhouettes.
I have the 1917a1, the 1919a4, and the M1 Garand programmed. Every gun room, reloading room, man cave or garage needs at least one!
I am working on the Right and left side plates for making dummy .30 caliber beltfeds and M2HB's.
I am also almost complete with the programming of the right and left side plates for making pseudo 1917a1 cradles.
Below are pics of some that have already been ordered by others. However I can cut any of them as needed now that I have the program complete and saved.
These are 24 inches long. That is the max length that will fit in a USPS priority mail "board game" flat rate box. Thickness is generally 16 gauge mild steel unless you request something thicker. I've shipped as many as three in a box with no issues.
Most want them in the raw so that they can put their own finish on them. I can throw a basic coat of rattle can black on them if you want. I can even parkerize them, but that is extra.
I can put house numbers or names in the garand stock or water jacket if they fit. The pic of the water cooled is an example of that. You'll have to ask for a quote on that.
The Garand is $50 shipped. US postal money orders or PayPal.
The 1919a4 and 1917a1's are $68 shipped, or $100 a set shipped. These take longer to cut, especially the 1919a4, and take longer to clean.
Andy
CNC Plasma Cut Gun Sihlouettes
-
- Sergeant Major of the Gee
- Posts: 474
- Joined: Wed Dec 24, 2008 6:36 am
- Location: North Carolina
CNC Plasma Cut Gun Sihlouettes
1943 Willys MB285433 D.O.D. 12-3-1943
1951 M100 trailer D.O.D. 3/51
1951 M37 Truck D.O.D. 5-28-1951
M3 37MM ATG
M3A4 Hand Cart
Wife D.O.Delivery 7-21-1979
Boy D.O.Delivery. 2-15-2007
Girl D.O.Delivery. 4-9-2009
Girl D.O.Delivery. 10-23-2012
1951 M100 trailer D.O.D. 3/51
1951 M37 Truck D.O.D. 5-28-1951
M3 37MM ATG
M3A4 Hand Cart
Wife D.O.Delivery 7-21-1979
Boy D.O.Delivery. 2-15-2007
Girl D.O.Delivery. 4-9-2009
Girl D.O.Delivery. 10-23-2012
-
- G-Captain
- Posts: 799
- Joined: Sat Feb 11, 2006 11:37 am
- Location: So.Cal
Re: CNC Plasma Cut Gun Sihlouettes
Very Nice Andy.
I might just have to get me some of those.
I might just have to get me some of those.
- Goranwc51
- G-Major
- Posts: 821
- Joined: Thu Jun 24, 2004 5:56 am
- Location: Stockholm, Sweden
Re: CNC Plasma Cut Gun Sihlouettes
That is sooooo "I want it!" worthy
I'd be really interested in the side plates for the M1919 and the M2 once you get there. I'd be ordering a couple of each, due to the high cost of shipping just a pair to Sweden, where I live. Please sign me up: goran_noren[at]yahoo[dot]com. Thnkx
We have extremely tough gun laws in this country, and if you wanna have a gun on your vehicle, MB/GPW, Dodge WC or GMC CCKW, you have to weld it together yourself.
Tnkx
Goran N
I'd be really interested in the side plates for the M1919 and the M2 once you get there. I'd be ordering a couple of each, due to the high cost of shipping just a pair to Sweden, where I live. Please sign me up: goran_noren[at]yahoo[dot]com. Thnkx
We have extremely tough gun laws in this country, and if you wanna have a gun on your vehicle, MB/GPW, Dodge WC or GMC CCKW, you have to weld it together yourself.
Tnkx
Goran N
- Attachments
-
- Browning30Cal016.JPG (163.21 KiB) Viewed 634 times
-
- Sergeant Major of the Gee
- Posts: 409
- Joined: Tue Jul 01, 2008 1:47 pm
- Location: San Mateo, CA
Re: CNC Plasma Cut Gun Sihlouettes
GoranGoranwc51 wrote:That is sooooo "I want it!" worthy
I'd be really interested in the side plates for the M1919 and the M2 once you get there. I'd be ordering a couple of each, due to the high cost of shipping just a pair to Sweden, where I live. Please sign me up: goran_noren[at]yahoo[dot]com. Thnkx
We have extremely tough gun laws in this country, and if you wanna have a gun on your vehicle, MB/GPW, Dodge WC or GMC CCKW, you have to weld it together yourself.
Tnkx
Goran N
Move to USA or Checz republic once they pass their new law.
Don't go to California though until we sort some 2nd amendment issues with the liberals; limiters that is.
Z
Zareh
GPW 43
BMW R27
BMW R35
GPW 43
BMW R27
BMW R35
- Goranwc51
- G-Major
- Posts: 821
- Joined: Thu Jun 24, 2004 5:56 am
- Location: Stockholm, Sweden
Re: CNC Plasma Cut Gun Sihlouettes
Lived in the US a couple of years, on the East Coast and loved it. May take you up on it.
Goran N
Goran N
Who is online
Users browsing this forum: No registered users and 45 guests