Need data plate for 81MM mortar
-
- G-Master Sergeant
- Posts: 111
- Joined: Fri Nov 28, 2008 6:38 am
- Location: Fort Dix
Need data plate for 81MM mortar
Need data plate for 81MM mortar base plate and also for bipod. For WWII mortar? Can any one help ?
-
- G-Major
- Posts: 872
- Joined: Tue Apr 11, 2006 3:05 pm
- Location:
Re: Need data plate for 81MM mortar
If you find a source, let me know. I too need one for a US 81mm bipod.
-
- G-Lieutenant General
- Posts: 6808
- Joined: Fri Dec 13, 2002 5:05 pm
- Location: Patagonia, AZ EIEIO
-
- G-Major
- Posts: 872
- Joined: Tue Apr 11, 2006 3:05 pm
- Location:
Re: Need data plate for 81MM mortar
I actually need a 1943 Pullman plate, to match my 1943 Pullman cup...
So that more than 2 are being ordered, perhaps we should poke around? 1919a4.com?
So that more than 2 are being ordered, perhaps we should poke around? 1919a4.com?
-
- G-Command Sergeant Major
- Posts: 224
- Joined: Fri Apr 23, 2004 8:20 pm
- Location: Chattanooga, TN.
Re: Need data plate for 81MM mortar
Correct me if I'm wrong but I didn't think that WW2 USGI 81mm mortar base plates had data plates?? Only the bipods had data plates.machinest-man wrote:Need data plate for 81MM mortar base plate and also for bipod. For WWII mortar? Can any one help ?
Thanks,
bfryar44
-
- G-Major
- Posts: 872
- Joined: Tue Apr 11, 2006 3:05 pm
- Location:
Re: Need data plate for 81MM mortar
I've never seen an original US baseplate with a dataplate, or the holes for one. However, the Brandt 81mm's did have a plate there. It crossed my mind that the OP was wanting a plate for a Brandt, but he wasn't clear.bfryar44 wrote:Correct me if I'm wrong but I didn't think that WW2 USGI 81mm mortar base plates had data plates?? Only the bipods had data plates.machinest-man wrote:Need data plate for 81MM mortar base plate and also for bipod. For WWII mortar? Can any one help ?
Thanks,
bfryar44
-
- G-Command Sergeant Major
- Posts: 224
- Joined: Fri Apr 23, 2004 8:20 pm
- Location: Chattanooga, TN.
Re: Need data plate for 81MM mortar
That's been my experience as well. A good friend has one of the Brandt baseplates that had the six small data plate holes. He welded over the holes and it looks just like a USGI baseplate, minus the GI numbers on the bottom though.nirvana wrote: I've never seen an original US baseplate with a dataplate, or the holes for one. However, the Brandt 81mm's did have a plate there. It crossed my mind that the OP was wanting a plate for a Brandt, but he wasn't clear.
-
- Sergeant Major of the Gee
- Posts: 478
- Joined: Tue Dec 17, 2002 4:17 pm
- Location:
Re: Need data plate for 81MM mortar
Bryan,
My M1 81mm base plate is U.S. and does NOT have holes or a data plate on it.. I was lucky when I got the set up.. has a 42 dated tube and bipod..
1944m8
Kration
My M1 81mm base plate is U.S. and does NOT have holes or a data plate on it.. I was lucky when I got the set up.. has a 42 dated tube and bipod..
1944m8
Kration
-
- G-Master Sergeant
- Posts: 111
- Joined: Fri Nov 28, 2008 6:38 am
- Location: Fort Dix
Re: Need data plate for 81MM mortar
Can anyone give me the size of the plate. I have one of those IMA 81mm mortars I wont to make plates on CNC and if any one else need some let me know I can make anything!
-
- G-Master Sergeant
- Posts: 111
- Joined: Fri Nov 28, 2008 6:38 am
- Location: Fort Dix
Re: Need data plate for 81MM mortar
Fabricated plates this morning!
- Attachments
-
- IMG_0487 re size.jpg (82.88 KiB) Viewed 1231 times
-
- G-Master Sergeant
- Posts: 111
- Joined: Fri Nov 28, 2008 6:38 am
- Location: Fort Dix
Re: Need data plate for 81MM mortar
Also need pictures of plate for Base Plate?
-
- G-Major
- Posts: 872
- Joined: Tue Apr 11, 2006 3:05 pm
- Location:
Re: Need data plate for 81MM mortar
If you are restoring this as a US 81mm, you do not need a plate for the base. Weld the holes shut or just ignore them.machinest-man wrote:Also need pictures of plate for Base Plate?
Plan on making another one of those plates? Whats the material? Type, gauge, etc.
-
- G-Sergeant First Class
- Posts: 84
- Joined: Tue May 31, 2011 10:34 am
- Location:
Re: Need data plate for 81MM mortar
I JUST RECEIVED NOS BASE PLATE 02-08-45 DATED FROM ORIGINAL BOX .....NO PLATE AT ALL
-
- G-Private First Class
- Posts: 12
- Joined: Sat Jan 19, 2013 2:41 pm
- Location:
Re: Need data plate for 81MM mortar
Any way I could get 2 repro data plates for the 81mm mortar?
- Bryan
- G-Colonel
- Posts: 1559
- Joined: Wed Feb 26, 2003 3:43 pm
- Location: Near Reno, NV
Re: Need data plate for 81MM mortar
I could use a bipod plate as well, any idea of the costs? where?
41 GP 14935
42 MB II6359 Slatgrill
51 CJ3A
43 Kubelwagen
53 M-170
Trailers, Bantam T-3,Converto,M-100
M-416, Ben Hur (Checker)USN MKII
42 MB II6359 Slatgrill
51 CJ3A
43 Kubelwagen
53 M-170
Trailers, Bantam T-3,Converto,M-100
M-416, Ben Hur (Checker)USN MKII
Who is online
Users browsing this forum: No registered users and 74 guests