G-527 faucet box prototypes
-
- G-Captain
- Posts: 739
- Joined: Wed Sep 29, 2004 5:12 am
- Location: Texas
Re: G-527 faucet box prototypes
The facets on your VERY NICE Ben HUR water trailer appear to be brass. The only ones I can find on the website are steel/chrome. Help! PS, I bought the G527 that was at ArmyCarsUSA. Paul
1944 WC51
1944 WC62
1943 M-20
1943 Ben Hur
1943 Water Ben Hur
1944 M51 Quad Mount Trailer
1944 M5A1 Stuart
1943 352 CCKW
1944 Corbitt 6 Ton
1944 M16 Halftrack
1944 WC62
1943 M-20
1943 Ben Hur
1943 Water Ben Hur
1944 M51 Quad Mount Trailer
1944 M5A1 Stuart
1943 352 CCKW
1944 Corbitt 6 Ton
1944 M16 Halftrack
-
- G-Major
- Posts: 870
- Joined: Mon Feb 08, 2010 7:45 pm
- Location: Southern California
Re: G-527 faucet box prototypes
Hello, the valve pictures on the website are chrome but they don't show an individual pictures of the 301SC, 302SC,301SCPE and 302SCPE they are brass to my knowledge, (If you look again at the Champion-Arrowhead website you'll see the "chrome" ones are about $20 bucks more with longer part numbers) and congratulations on your "New" old trailer! Your trailer was the inspiration for my "wood" hose rack! Nothin' quite like tryin' to reverse engineer a three dimentional part from a two dimention picture. Ha! I wanted to ask Kevin Kronlund if he would sell the valve box backing plates, but I didn't have the cash and I figured It would make the next owner have a harder time trying to restore the trailer. With the backing "plates" you can make the covers easier, also the tank and pump were very complete considering its age! Good luck, Wear a respirator while sandblasting and properly store/identify things when you take it apart so you can remember where it goes when the time comes to bolt it back together! If you find a source that sells a 3.5 inch internal leather seal for the transfer pump let me know, And post you photos as your working on the old girl!
1942 G7117 No. 389946
1945 G527 Serial no.9218
USN CM3 NMCB "4"
Cat Field SVC/GPS installer
Cat Main shop Mech
1945 G527 Serial no.9218
USN CM3 NMCB "4"
Cat Field SVC/GPS installer
Cat Main shop Mech
-
- G-First Sergeant
- Posts: 148
- Joined: Fri Oct 22, 2004 9:25 am
- Location: Camp Robinson, AR
- Contact:
Re: G-527 faucet box prototypes
What are the dimensions of the valve box backing plate. Looking at the various references it seems the length is 20 inches but I cannot figure the width and height. Anyone have an original to measure?
Thanks
Thanks
Matt Anderson
Veteran, OSW, OIF 04
42 L-5 Sentinel
42 MB 159175
45 GPW 265045
43 Converto 0567681
43 Ben Hur 16205
Veteran, OSW, OIF 04
42 L-5 Sentinel
42 MB 159175
45 GPW 265045
43 Converto 0567681
43 Ben Hur 16205
- Dinadin
- Sergeant Major of the Gee
- Posts: 454
- Joined: Mon Jan 22, 2007 4:20 pm
- Location: St. Louis, Missouri
- Contact:
Re: G-527 faucet box prototypes
I just got a 1942 Ben Hur G-527 and I am going to need the faucet boxes and the tray. If you are not making them I would appreciate the dimensions.
Rich
1942 Diamond T M3 Halftrack
1945 Willys MB
M5 High Speed Tractor
M29 Weasel
1953 Studebaker M35A2
1970 Kiaser-Jeep M35A2
Schafer's Folly?
1942 Diamond T M3 Halftrack
1945 Willys MB
M5 High Speed Tractor
M29 Weasel
1953 Studebaker M35A2
1970 Kiaser-Jeep M35A2
Schafer's Folly?
-
- G-Major
- Posts: 870
- Joined: Mon Feb 08, 2010 7:45 pm
- Location: Southern California
Re: G-527 faucet box prototypes
Hello, I was doin' rough figuring for the cost of manufacture, $400.00 for me to make the boxes. I will pass on my dimentions if you do not want to have me make a set. Here are some rough figures:
1-$240 - have metal shop make "blank" boxes out of 1/8th thick mild steel
2-$20 - have the faucet holes drilled in with a drill press
3-$20 - have the hinge holes dilled in to mount the hinges on the top
4-$20 - buy the hinges (6) 3 screen door kits
5-$20 - buy and weld on "tabs" for the door clips/chain
6-$20 - buy and install "dog chain" for the door securement/deploymnent
7-$10 - hardware for installation of hinges and "dog chain"
8-$50 - labor and parts accquisition
9-$??? - shipping and handling (maybe 20-30 lbs)
I will have to re-measure the boxes tomorrow when I am by the trailer, but I have a tid-bit of trailer info to pass, check out cckw.org and the trailer areas-
http://www.cckw.org/Water_Buffalo_Prod_Data.htm" onclick="window.open(this.href);return false;. There's production info about Contract, U.S.A., serial numbers and quantitys of trailers manufactured! Good stuff! I'm trying to use this list to figure out the "U.S.A." number on my trailer, but I don't know if "Springfield Auto Works" is the same as "Springfield Wagon & Trailer".
1-$240 - have metal shop make "blank" boxes out of 1/8th thick mild steel
2-$20 - have the faucet holes drilled in with a drill press
3-$20 - have the hinge holes dilled in to mount the hinges on the top
4-$20 - buy the hinges (6) 3 screen door kits
5-$20 - buy and weld on "tabs" for the door clips/chain
6-$20 - buy and install "dog chain" for the door securement/deploymnent
7-$10 - hardware for installation of hinges and "dog chain"
8-$50 - labor and parts accquisition
9-$??? - shipping and handling (maybe 20-30 lbs)
I will have to re-measure the boxes tomorrow when I am by the trailer, but I have a tid-bit of trailer info to pass, check out cckw.org and the trailer areas-
http://www.cckw.org/Water_Buffalo_Prod_Data.htm" onclick="window.open(this.href);return false;. There's production info about Contract, U.S.A., serial numbers and quantitys of trailers manufactured! Good stuff! I'm trying to use this list to figure out the "U.S.A." number on my trailer, but I don't know if "Springfield Auto Works" is the same as "Springfield Wagon & Trailer".
1942 G7117 No. 389946
1945 G527 Serial no.9218
USN CM3 NMCB "4"
Cat Field SVC/GPS installer
Cat Main shop Mech
1945 G527 Serial no.9218
USN CM3 NMCB "4"
Cat Field SVC/GPS installer
Cat Main shop Mech
-
- G-Major
- Posts: 870
- Joined: Mon Feb 08, 2010 7:45 pm
- Location: Southern California
Re: G-527 faucet box prototypes
Those box measurements are: 20 1/2 x 6 X 6 (aprox.) hope these help
1942 G7117 No. 389946
1945 G527 Serial no.9218
USN CM3 NMCB "4"
Cat Field SVC/GPS installer
Cat Main shop Mech
1945 G527 Serial no.9218
USN CM3 NMCB "4"
Cat Field SVC/GPS installer
Cat Main shop Mech
-
- G-Major General
- Posts: 2591
- Joined: Wed Sep 19, 2007 11:14 am
- Location: denver co.
-
- G-Brigadier General
- Posts: 2031
- Joined: Sun Dec 21, 2003 7:50 am
- Location: East Central Indiana
Re: G-527 faucet box prototypes
I take it this never went any further.
43 M3A1 256117, 42 CCKW 129,XXX, 43 GPW 146954, 43 WC54 81635383, 43 WC54 81665843, 45 WC52 818682 "MO', 43 WC63 82009972 "BIG MO", 44 GTBA NAVY CARGO 218299, 43 PE95, 44 Checker K52 Trailer,42 MBT 375, 44 Coverto Trailer 886475
-
- G-Master Sergeant
- Posts: 105
- Joined: Sun Jun 22, 2003 8:04 pm
- Location:
Re: G-527 faucet box prototypes
Thanks Pintelhook11over for starting this thread and sharing your
progress on the faucet covers you built.
We built a set for our project trailer and they turned out good.
We used 14 gauge metal that I had left over from building the
tank. It bends pretty easy and they are still pretty sturdy.
progress on the faucet covers you built.
We built a set for our project trailer and they turned out good.
We used 14 gauge metal that I had left over from building the
tank. It bends pretty easy and they are still pretty sturdy.
-
- G-Corporal
- Posts: 23
- Joined: Thu Mar 01, 2012 12:32 am
- Location: Austria / Vorarlberg / Hörbranz
Re: G-527 faucet box prototypes
Whats the actual stand? .... following
-
- G-Brigadier General
- Posts: 2031
- Joined: Sun Dec 21, 2003 7:50 am
- Location: East Central Indiana
Re: G-527 faucet box prototypes
Check out the Facebook Ben Hur Trailer group. There are plans and contact information to folks that will make boxes for you.
https://www.facebook.com/groups/372030019633395/
https://www.facebook.com/groups/372030019633395/
43 M3A1 256117, 42 CCKW 129,XXX, 43 GPW 146954, 43 WC54 81635383, 43 WC54 81665843, 45 WC52 818682 "MO', 43 WC63 82009972 "BIG MO", 44 GTBA NAVY CARGO 218299, 43 PE95, 44 Checker K52 Trailer,42 MBT 375, 44 Coverto Trailer 886475
Who is online
Users browsing this forum: Bing [Bot] and 47 guests