front axle seals needed
Moderator: kw573
-
- G-First Sergeant
- Posts: 132
- Joined: Wed Dec 24, 2008 7:41 pm
- Location: buffalo
front axle seals needed
need front wheel bearing seal: 3665138 -----
-
- Sergeant Major of the Gee
- Posts: 356
- Joined: Sat Dec 28, 2013 1:07 pm
- Location: SE MI
Re: front axle seals needed
If you are not looking for original parts, there is a good cross reference here:
http://www.cckw.org/part_number_cross.htm
Shows NAPA 36220CR for the Banjo front hub seal. I used these on my truck, They were a heavy duty, high quality seal, however installation was a little tricky:
http://cckw.org/forum/viewtopic.php?f=1&t=5524
The images are long gone, but essentially you need to recess the seal into the hub slightly, otherwise it contacts the spindle. (Will check when I get home tonight to see if I can find the images that go with that post.) I assume that the OEM seal has a flange that locates the seal in the correct position.
If you are looking for OEM, there happens to be some on E-pay right now:
https://www.ebay.com/itm/WWII-G508-G506 ... NA&vxp=mtr
Not sure if they are made of leather or more modern materials....
Best Regards....
http://www.cckw.org/part_number_cross.htm
Shows NAPA 36220CR for the Banjo front hub seal. I used these on my truck, They were a heavy duty, high quality seal, however installation was a little tricky:
http://cckw.org/forum/viewtopic.php?f=1&t=5524
The images are long gone, but essentially you need to recess the seal into the hub slightly, otherwise it contacts the spindle. (Will check when I get home tonight to see if I can find the images that go with that post.) I assume that the OEM seal has a flange that locates the seal in the correct position.
If you are looking for OEM, there happens to be some on E-pay right now:
https://www.ebay.com/itm/WWII-G508-G506 ... NA&vxp=mtr
Not sure if they are made of leather or more modern materials....
Best Regards....
Who is online
Users browsing this forum: No registered users and 34 guests