WTB G506 Harmonic Balancer
-
- G-Colonel
- Posts: 1916
- Joined: Sat Mar 03, 2012 9:09 am
- Location: Western North Carolina
WTB G506 Harmonic Balancer
Looking to get either a rebuildable core or NOS Chevrolet 235 harmonic balancer (HB). Need a HB with the original 7/8 wide pulley. Please check your junk piles for the long discarded original babbit engines that most likely bit the dust many moons ago.
1941 G4112 Chevrolet with Hercules dump bed
-
- G-Command Sergeant Major
- Posts: 249
- Joined: Wed Mar 09, 2011 3:27 pm
- Location:
Re: WTB G506 Harmonic Balancer
Would you happen to know if a ww2 235 harmonic balancer fits late model 235 ? Takes the same seal? Is a 216 balancer the same as ww2 235? I may know where to find 216.
-
- G-Colonel
- Posts: 1916
- Joined: Sat Mar 03, 2012 9:09 am
- Location: Western North Carolina
Re: WTB G506 Harmonic Balancer
The harmonic balancers from nearly any Chevrolet 216/235/261 will fit and work on any combination of Chevrolet crankshaft snouts. The timing cover seal is the same for all applications previously mentioned. The big difference is that the G506 HB has a 7/8 pulley width whereas the other civilian applications are either 5/8 or 3/8 depending on year. The pulley is riveted onto the HB hub, and therefor not very interchangeable.
1941 G4112 Chevrolet with Hercules dump bed
-
- G-Command Sergeant Major
- Posts: 249
- Joined: Wed Mar 09, 2011 3:27 pm
- Location:
Re: WTB G506 Harmonic Balancer
Thanks for the information. I need to change the balancer on my truck . I have a late model truck 235, I used a adapter plate , lowering pump location, old style pump. You know the deal. They claimed that having a truck balancer the belt would sit lower making the ratio acceptable. I found that to be incorrect. At least for a high rpm slow truck. Water pump speed to fast. I have a ww2 balancer, water pump and a 7/8 pulley for the 12v generator. Have to pull radiator and swap parts someday.
-
- G-Colonel
- Posts: 1916
- Joined: Sat Mar 03, 2012 9:09 am
- Location: Western North Carolina
Re: WTB G506 Harmonic Balancer
Still on the look out for a decent G506 harmonic balancer with a 7/8 inch diameter pulley.
1941 G4112 Chevrolet with Hercules dump bed
Who is online
Users browsing this forum: No registered users and 39 guests