Looking for good usable EC, CTR, and A bolts. They are for my 1945 MB but I know the bolts were shared with at least the CJ-2A. I am not sure if all the sizes listed below were used on the CJ so I just list all the ones I need just in case. If you have AA, TR, ATR, or TR20 bolts in the sizes I might want them. Thank you!
16 x 1/4-20 1/2”
8 x 1/4-20 3/4”
16 x 1/4-20 5/8”
4 x 1/4-28 1/2”
2 x 1/4-28 1”
2 x 1/4-28 3/4”
2 x 5/16-18 1/2”
1 x 5/16-24 1”
1 x 5/16-24 1 1/8”
2 x 5/16-18 1 5/8”
1 x 5/16-18 7/8”
1 x 5/16-18 1 1/4”
5 x 3/8-16 7/8”
2 x 3/8-16 1 1/4”
2 x 3/8-16 1 3/4”
2 x 3/8-16 1 5/8”
3 x 3/8-16 2”
4 x 3/8-24 1 3/8”
EC, CTR, and A bolts wanted
-
- G-First Lieutenant
- Posts: 689
- Joined: Sun Mar 25, 2012 11:19 am
- Location: Lexington Park, MD (Southern MD)
EC, CTR, and A bolts wanted
TJ Zackman
1945 Willys MB, 430923, 3/28/45
Scored 98.375% at 2019 MVPA Convention York, PA
1953 M38A1, 69248, 12/53, 20999713
MVPA# 37298
1945 Willys MB, 430923, 3/28/45
Scored 98.375% at 2019 MVPA Convention York, PA
1953 M38A1, 69248, 12/53, 20999713
MVPA# 37298
-
- G-Lieutenant General
- Posts: 4991
- Joined: Sat Jun 10, 2006 11:40 pm
- Location: Colorado
Re: EC, CTR, and A bolts wanted
I don't think there's an original bolt left on Ol' Unreliable. Any that may have been original were replaced by me because they were rusted beyond use, or else they were worn out and unusable. I've gone stainless as much as possible.
Is it true real Jeeps have flat fenders?
Alone cannot you it resist!
Alone cannot you it resist!
Who is online
Users browsing this forum: No registered users and 32 guests