Waterproof Shilded Plug Wire ID Help
-
- G-Colonel
- Posts: 1769
- Joined: Sun Dec 22, 2002 4:47 pm
- Location: Monroe , La
Waterproof Shilded Plug Wire ID Help
I have a bunch of plug wires I acquired and need help to identify what vehicle they fit . Can someone give me lengths and straight or 90 ends for the Mighty Might so I can see if any are for this application. Thanks Warren Duchesnne
- Radar4xfour
- G-Sergeant Major
- Posts: 173
- Joined: Tue Nov 01, 2011 4:25 pm
- Location: MN
Re: Waterproof Shilded Plug Wire ID Help
The SL-4 parts book has the information regarding the lengths of the wires and what ends are required.
Regards,
Radar
Regards,
Radar
- Austringer
- G-Major General
- Posts: 3212
- Joined: Tue Jan 27, 2004 8:21 pm
- Location: Altanta, GA
Re: Waterproof Shilded Plug Wire ID Help
The wire lengths are as follows:
Cylinders:
1 & 2: ~28 Long
3: ~23 long
4: ~26" long
From the engine manual the following have 90 degree elbows:
#2 at engine
#4 at distributer
This from the -20 and the other show both with and without bent cables.
Cylinders:
1 & 2: ~28 Long
3: ~23 long
4: ~26" long
From the engine manual the following have 90 degree elbows:
#2 at engine
#4 at distributer
This from the -20 and the other show both with and without bent cables.
Jason Green
Atlanta, Ga
STILL NOT associated with the Georgia MVPA 15 years and counting as long as that one guy is president of the club....
1963 Willys M151 (under resto)
1969 M706E1
1983 M106A2
Atlanta, Ga
STILL NOT associated with the Georgia MVPA 15 years and counting as long as that one guy is president of the club....
1963 Willys M151 (under resto)
1969 M706E1
1983 M106A2
Who is online
Users browsing this forum: No registered users and 35 guests