Anyone making new locking tabs for the bearing adjusting nut on the front hub?
Thx
Front hub locking tabs
- Austringer
- G-Major General
- Posts: 3212
- Joined: Tue Jan 27, 2004 8:21 pm
- Location: Altanta, GA
Front hub locking tabs
Jason Green
Atlanta, Ga
STILL NOT associated with the Georgia MVPA 15 years and counting as long as that one guy is president of the club....
1963 Willys M151 (under resto)
1969 M706E1
1983 M106A2
Atlanta, Ga
STILL NOT associated with the Georgia MVPA 15 years and counting as long as that one guy is president of the club....
1963 Willys M151 (under resto)
1969 M706E1
1983 M106A2
- mspeters
- G-Sergeant Major
- Posts: 169
- Joined: Mon Jun 11, 2007 9:05 am
- Location: N. Calif.
- Contact:
Re: Front hub locking tabs
Jason,
My resto mite project used locks that appear to be made from a picture hook !
I filed down some 'gib keys' from McMaster to do the job and used calipers to check progress. Took about 10 min each to remove the taper and flatten the head portion.
Mark P.
My resto mite project used locks that appear to be made from a picture hook !
I filed down some 'gib keys' from McMaster to do the job and used calipers to check progress. Took about 10 min each to remove the taper and flatten the head portion.
Mark P.
- Attachments
-
- image.jpg (13.54 KiB) Viewed 462 times
Who is online
Users browsing this forum: No registered users and 37 guests