Some Handy Mighty Mite Info (PART NUMBERS)
-
- G-Private First Class
- Posts: 9
- Joined: Mon May 31, 2010 8:29 am
- Location: Florida & New Jersey
- Contact:
Mighty Mite Info, CARB REBUILD KIT, (PART NUMBERS)
Can you list and or send me the numbers for the carb. rebuild kit?
Thanks, Pat
"I did find a carb rebuild kit that was a exact match and a master cylinder kit that works.I can list #'s if anyone needs them."
Thanks, Pat
"I did find a carb rebuild kit that was a exact match and a master cylinder kit that works.I can list #'s if anyone needs them."
-
- G-Staff Sergeant
- Posts: 50
- Joined: Wed Jan 08, 2003 8:59 am
- Location: north florida
Re: Some Handy Mighty Mite Info (PART NUMBERS)
I found a part number for the steering box shaft seal.
Timken 480889
Timken 480889
- Jim Sanders
- G-Sergeant Major
- Posts: 158
- Joined: Fri Dec 13, 2002 4:05 pm
- Location: Texas Gulf Coast
Re: Some Handy Mighty Mite Info (PART NUMBERS)
Could you post the part numbers or email them. thanks
1960 M422 w/M416B1 trailer
1946 CJ-2A
2006 Rubicon
1969 Jeepster Commando
1946 CJ-2A
2006 Rubicon
1969 Jeepster Commando
- mspeters
- G-Sergeant Major
- Posts: 169
- Joined: Mon Jun 11, 2007 9:05 am
- Location: N. Calif.
- Contact:
Re: Some Handy Mighty Mite Info (PART NUMBERS)
SHOCK ABSORBERS
Transfer post from the dead steel soldiers site
These are Monroe part numbers from 7 years ago. They should still x-ref.
These numbers are similar to the Mite shock specs in the Mite Tech Manuals.
Fronts -- 5753 (10.375" - 16.750") -- Sensa-Trac - mid 50's Mercurys
Rear -- 555003 (9.625" - 14.75") - Gas Magnum RV/trailer shock
Transfer post from the dead steel soldiers site
These are Monroe part numbers from 7 years ago. They should still x-ref.
These numbers are similar to the Mite shock specs in the Mite Tech Manuals.
Fronts -- 5753 (10.375" - 16.750") -- Sensa-Trac - mid 50's Mercurys
Rear -- 555003 (9.625" - 14.75") - Gas Magnum RV/trailer shock
- mspeters
- G-Sergeant Major
- Posts: 169
- Joined: Mon Jun 11, 2007 9:05 am
- Location: N. Calif.
- Contact:
-
- G-Sergeant
- Posts: 30
- Joined: Tue Jun 21, 2016 6:00 pm
- Location:
Re: Some Handy Mighty Mite Info (PART NUMBERS)
Bill, do you you know how to find these spring bushings. I couldn't find on suspension.com
Mark P
Mark P
- Radar4xfour
- G-Sergeant Major
- Posts: 173
- Joined: Tue Nov 01, 2011 4:25 pm
- Location: MN
Re: Some Handy Mighty Mite Info (PART NUMBERS)
Hello Mark,
Energy Suspension P# is 9.9176G, qty. 16 needed per vehicle.n. Order from any Energy Suspension dealer, mine came from Summit Racing.
Regards,
Radar
Energy Suspension P# is 9.9176G, qty. 16 needed per vehicle.n. Order from any Energy Suspension dealer, mine came from Summit Racing.
Regards,
Radar
-
- G-Staff Sergeant
- Posts: 50
- Joined: Wed Jan 08, 2003 8:59 am
- Location: north florida
Re: Some Handy Mighty Mite Info (PART NUMBERS)
here is some updated numbers from some obsolete part numbers. I am posting all that I have again.
Front hub large bearing sets Timken 27690 bearing and 27620 race
Front hub small bearing sets Timken 18790 bearing and 18720 race
Front hub seal National 410708
Rear hub bearing sets National LM67048 bearing and LM67010 race
Or Timken SET6
Rear hub bearing seal National 473445 or SKF 16680
Engine front pulley seal National 473367
Steering box shaft seal Timken 480889
Front hub large bearing sets Timken 27690 bearing and 27620 race
Front hub small bearing sets Timken 18790 bearing and 18720 race
Front hub seal National 410708
Rear hub bearing sets National LM67048 bearing and LM67010 race
Or Timken SET6
Rear hub bearing seal National 473445 or SKF 16680
Engine front pulley seal National 473367
Steering box shaft seal Timken 480889
-
- G-Sergeant
- Posts: 37
- Joined: Sun Sep 30, 2018 8:07 am
- Location:
Re: Some Handy Mighty Mite Info (PART NUMBERS)
Hello
My name is Roger. I just became a member. looking forward to exchanging information. I was wondering if anyone has the carb rebuild kit numbers.
Thanks
My name is Roger. I just became a member. looking forward to exchanging information. I was wondering if anyone has the carb rebuild kit numbers.
Thanks
-
- G-Staff Sergeant
- Posts: 62
- Joined: Sat Jun 03, 2017 8:34 pm
- Location: Modesto, Ca
Re: Some Handy Mighty Mite Info (PART NUMBERS)
Hi Roger,
I found this carb kit from carbs unlimited #KT-5105 but it does not have the correct bowl gasket. It does have the correct accel pump, power valve and float needle and seat and the throttle plate to body gasket. I saw the bowl gasket on M422a1.com website.
I hope that this helps!
Ed H
I found this carb kit from carbs unlimited #KT-5105 but it does not have the correct bowl gasket. It does have the correct accel pump, power valve and float needle and seat and the throttle plate to body gasket. I saw the bowl gasket on M422a1.com website.
I hope that this helps!
Ed H
-
- G-Sergeant
- Posts: 37
- Joined: Sun Sep 30, 2018 8:07 am
- Location:
Re: Some Handy Mighty Mite Info (PART NUMBERS)
Hello Ed
Thanks for the information.
Thanks for the information.
- mspeters
- G-Sergeant Major
- Posts: 169
- Joined: Mon Jun 11, 2007 9:05 am
- Location: N. Calif.
- Contact:
Re: Some Handy Mighty Mite Info (PART NUMBERS)
Pinion Seals for front and Rear diff.
Standard = 5778 Timken - Nitrile rubber
Modern crossover = 4941V Timken; SKF 15791 - These are both Fluoroelastomer
Standard = 5778 Timken - Nitrile rubber
Modern crossover = 4941V Timken; SKF 15791 - These are both Fluoroelastomer
-
- G-Private First Class
- Posts: 9
- Joined: Mon May 31, 2010 8:29 am
- Location: Florida & New Jersey
- Contact:
Re: Some Handy Mighty Mite Info (PART NUMBERS)
DID anyone come up with the Answer?lawverdict wrote: ↑Sun Mar 31, 2013 4:35 pmA carb rebuild kit number and brake master cylinder rebuild number would be appreciated.
- Babadave
- G-Sergeant
- Posts: 44
- Joined: Wed Aug 11, 2010 4:25 am
- Location:
Re: Some Handy Mighty Mite Info (PART NUMBERS)
Carb kits 'per se' ? No, nothing is a direct and complete kit for this Holley.
You can get various kits that come close. But nothing I have found is a direct exact complete rebuild kit.
I have had good success with this place :
https://daytonaparts.com/
They clean, replate as necessary and rebuild. They will even test run on a donkey engine and do initial settings. Not 'too' bad $ wise considering ? I have had 6 re-done there with Eathanol resistant rubber. They are all still going strong.
Brake master cylinder kit, same as above. This is a old Lockheed design. Aluminum bore. Fiddily to rebuild.
You can still find NOS Master cylinders on EBay, and most of the vendors. There ARE rebuild kits on EPay as well. NOS original kits are the way to go IMHO if your bore hones and cleans up perfectly
Good luck !
You can get various kits that come close. But nothing I have found is a direct exact complete rebuild kit.
I have had good success with this place :
https://daytonaparts.com/
They clean, replate as necessary and rebuild. They will even test run on a donkey engine and do initial settings. Not 'too' bad $ wise considering ? I have had 6 re-done there with Eathanol resistant rubber. They are all still going strong.
Brake master cylinder kit, same as above. This is a old Lockheed design. Aluminum bore. Fiddily to rebuild.
You can still find NOS Master cylinders on EBay, and most of the vendors. There ARE rebuild kits on EPay as well. NOS original kits are the way to go IMHO if your bore hones and cleans up perfectly
Good luck !
"We've been looking for the enemy for some time now. We've finally found him. We're surrounded. That simplifies things."
Lewis Burwell "Chesty" Puller
Lewis Burwell "Chesty" Puller
- mspeters
- G-Sergeant Major
- Posts: 169
- Joined: Mon Jun 11, 2007 9:05 am
- Location: N. Calif.
- Contact:
Pushrod tube springs
These pushrod tube springs can replace the rusty mite springs.
Centuryspring.com
# 71957-5
Centuryspring.com
# 71957-5
Who is online
Users browsing this forum: No registered users and 43 guests