Using a car tow dolly with a M151
-
- G-Sergeant
- Posts: 37
- Joined: Tue Oct 05, 2004 1:56 pm
- Location: Williamsburg, VA
Using a car tow dolly with a M151
Any suggestions for using a car tow dolly to tow a M151A2? Problems, things to look out for, etc. Thanks
-
- G-Lieutenant General
- Posts: 5918
- Joined: Sun Mar 19, 2006 10:04 am
- Location: Pemberton, New Jersey
Re: Using a car tow dolly with a M151
You can leave the rear driveshaft in but if you are going long distance I suggest you unbolt it from the differential and secure it tightly so that it does not pull out of the transmission and dump all of the oil. Or pull the shaft altogether and rig some way to hold the yoke in the transmission. Then be sure to grease the rear axles well since you will probably be going much faster than this thing was designed to go. Be sure the rear axle bearings are in good shape also.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
-
- G-Sergeant
- Posts: 37
- Joined: Tue Oct 05, 2004 1:56 pm
- Location: Williamsburg, VA
Re: Using a car tow dolly with a M151
Rick. Thanks for the info.
Who is online
Users browsing this forum: No registered users and 42 guests