photo help on ventilation system
Posted: Fri Mar 20, 2015 2:45 pm
I want to put the vent control valves and vent lines on my M38A1 to further complete the fording installation equipment.
I could use some close up photos of the connection of the upper control valve and how the control cable is mounted and what hole it goes through on the firewall.
I have ordered the bracket off the block for the lower control cable and it seems pretty straightforward.
I now have choke and throttle cable through same hole.
Not sure how you might post them or communicate them to me, so please advise
Thanks
Mike
I could use some close up photos of the connection of the upper control valve and how the control cable is mounted and what hole it goes through on the firewall.
I have ordered the bracket off the block for the lower control cable and it seems pretty straightforward.
I now have choke and throttle cable through same hole.
Not sure how you might post them or communicate them to me, so please advise
Thanks
Mike