photo help on ventilation system

For posting personal or other photos of the relevant G740, G758, M38, M38A1, M170 MV's for this Forum
Post Reply
mikeabn
G-Corporal
G-Corporal
Posts: 22
Joined: Sun Mar 08, 2015 9:09 am
Location: Barrington, illinois

photo help on ventilation system

Post by mikeabn » Fri Mar 20, 2015 2:45 pm

I want to put the vent control valves and vent lines on my M38A1 to further complete the fording installation equipment.
I could use some close up photos of the connection of the upper control valve and how the control cable is mounted and what hole it goes through on the firewall.
I have ordered the bracket off the block for the lower control cable and it seems pretty straightforward.
I now have choke and throttle cable through same hole.
Not sure how you might post them or communicate them to me, so please advise

Thanks

Mike
1935 Chrysler AIrflow
1950 Packard
1952 M38A1
1953 studebaker
1956 DeSoto


ACRay
G-Private First Class
G-Private First Class
Posts: 8
Joined: Wed Mar 18, 2015 6:40 am
Location:

Re: photo help on ventilation system

Post by ACRay » Mon Mar 23, 2015 4:37 am

I've been looking for some info on the routing and what goes where for the fording vent system. Flipping through the TM there are a few parts of it shown. ALSO WillysMJeeps forum has a great pdf in the download section of the "underwater ventilating system" that I found after a little forum search

Post Reply

Return to “- PHOTO GALLERY -”

Who is online

Users browsing this forum: No registered users and 31 guests