It's been too long since disassembly and I can't recall where the two bell housing reinforcing plates mount. I would greatly appreciate anyone's help.
Richard
1953 M38a1
Bell housing reinforcing plate locations?
-
- G-Private
- Posts: 5
- Joined: Thu Aug 08, 2013 5:10 pm
- Location:
-
- G-First Sergeant
- Posts: 130
- Joined: Wed Jan 07, 2015 1:30 pm
- Location:
Re: Bell housing reinforcing plate locations?
Bottom corners of the bellhousing, facing the engine. Holes are down. Lots of photos in the Tm's and over on WillysMJeeps.
I believe the stay cable bolts through the top
left hole if that helps. The brackets are formed
close to the shape of the bellhousing where they go.
Take care,
Brian
I believe the stay cable bolts through the top
left hole if that helps. The brackets are formed
close to the shape of the bellhousing where they go.
Take care,
Brian
-
- G-Private
- Posts: 5
- Joined: Thu Aug 08, 2013 5:10 pm
- Location:
Re: Bell housing reinforcing plate locations?
Excellent! Many thanks!
Who is online
Users browsing this forum: No registered users and 44 guests