Slave Connector Cable Lengths?
-
- G-First Sergeant
- Posts: 129
- Joined: Tue Mar 14, 2017 4:19 pm
- Location:
Slave Connector Cable Lengths?
Hi Guys,
If I were to install a slave connector/terminal in the provision on the passenger side of the cowl......I need to make sure the cables are long enough. So how long do the cables need to be to reach the battery terminals? II realize I can make cables to any length, but I'm lazy and want to buy a slave terminal with pre-made cables. I don't see any listing for the slave connector in the ORD 9. I searched using "slave".....is it called something else?
thanks,
bob
If I were to install a slave connector/terminal in the provision on the passenger side of the cowl......I need to make sure the cables are long enough. So how long do the cables need to be to reach the battery terminals? II realize I can make cables to any length, but I'm lazy and want to buy a slave terminal with pre-made cables. I don't see any listing for the slave connector in the ORD 9. I searched using "slave".....is it called something else?
thanks,
bob
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: Slave Connector Cable Lengths?
They come with the Power Plant Heater Kit, Receptacle ORD 7358734. I may or may not have an original left. They are vehicle specific due to length.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-First Sergeant
- Posts: 129
- Joined: Tue Mar 14, 2017 4:19 pm
- Location:
Re: Slave Connector Cable Lengths?
Hi Ben,
Do the slave cables connect at the battery terminals or at the starter and ground lug by the regulator? I don't remember seeing any additional holes in the battery box but I haven't looked under the dash real well in the area of the cowl where the slave terminal mounts.
thanks,
bob
Do the slave cables connect at the battery terminals or at the starter and ground lug by the regulator? I don't remember seeing any additional holes in the battery box but I haven't looked under the dash real well in the area of the cowl where the slave terminal mounts.
thanks,
bob
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: Slave Connector Cable Lengths?
Ground lug by regulator and at the + Terminal of the inboard battery. Not all receptacles are created equal.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-Private First Class
- Posts: 10
- Joined: Mon Oct 12, 2015 7:02 am
- Location: Alberta, Canada
Re: Slave Connector Cable Lengths?
The cables are two different lengths. The longer one (positive) is 32" in length from the back of the slave recepticle, and it connects to the starter lug. The shorter (negative) cable is 28" long, and connects to the ground lug by the regulator.
1953 M38A1 CDN
1967 M38A1 CDN2
1967 M38A1 CDN2
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: Slave Connector Cable Lengths?
There is a specific ORD No. Stamped on a band on the wires that ID's it for the M-38A1.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-First Sergeant
- Posts: 129
- Joined: Tue Mar 14, 2017 4:19 pm
- Location:
Re: Slave Connector Cable Lengths?
Ah.........that makes sense! I'll look later and see where the grommet holes in the firewall are for that routing scheme. Thanks for the info guys!!
regards,
bob
regards,
bob
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: Slave Connector Cable Lengths?
Why not install the correct Recepticle Assy? It goes thru the holes under those two little covers at the top of the toeboard. Far as I know there were no grommets.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-First Sergeant
- Posts: 129
- Joined: Tue Mar 14, 2017 4:19 pm
- Location:
Re: Slave Connector Cable Lengths?
Ah....didn't realize the cables went thru the holes under those covers.......will check it out tomorrow. Thanks!
Regards,
Bob
Regards,
Bob
-
- G-Private First Class
- Posts: 10
- Joined: Mon Oct 12, 2015 7:02 am
- Location: Alberta, Canada
Re: Slave Connector Cable Lengths?
Hi Bob. If I do this right you should see two photos attached. One photo shows the back side of the slave receptacle where it comes through to the passenger floorboard area (note the routing of the cables). In the center of the other photo, you can see the same two cables coming through the firewall (with grommets) behind the right front fender. The negative cable attaches to the local ground stud (shown in the photo), and the positive cable attaches to the starter stud. Hope that helps.
Wayne
Wayne
1953 M38A1 CDN
1967 M38A1 CDN2
1967 M38A1 CDN2
-
- G-Private First Class
- Posts: 10
- Joined: Mon Oct 12, 2015 7:02 am
- Location: Alberta, Canada
Re: Slave Connector Cable Lengths?
Sorry, it looks like I havent figured out how to attach the photos correctly. E-mail me, if you want to see them.
1953 M38A1 CDN
1967 M38A1 CDN2
1967 M38A1 CDN2
- diamondjim
- G-Second Lieutenant
- Posts: 554
- Joined: Mon Mar 10, 2003 4:11 pm
- Location:
Re: Slave Connector Cable Lengths?
so how would you install the connections in a M170,the regulator being on the drivers side,Jim
-
- G-First Lieutenant
- Posts: 640
- Joined: Thu Dec 30, 2004 6:45 pm
- Location:
Re: Slave Connector Cable Lengths?
Hi,
The previous posts did not specify M38 or M38A1. Can you confirm the lenghts of the cables please.
M38: 32" pos & 28" neg
M38A1: 36" for both pos & neg
Thanks,
Dave
The previous posts did not specify M38 or M38A1. Can you confirm the lenghts of the cables please.
M38: 32" pos & 28" neg
M38A1: 36" for both pos & neg
Thanks,
Dave
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: Slave Connector Cable Lengths?
They connect to the starter terminal and a grounding lug on the chassis near the starter.diamondjim wrote: ↑Wed Aug 02, 2017 3:45 pmso how would you install the connections in a M170,the regulator being on the drivers side,Jim
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-Private First Class
- Posts: 10
- Joined: Mon Oct 12, 2015 7:02 am
- Location: Alberta, Canada
Re: Slave Connector Cable Lengths?
Hi Dave; I can confirm the lengths for the M38A1 are 32" (positive) and 28" (negative). I don't know what the lengths are for the M38.
1953 M38A1 CDN
1967 M38A1 CDN2
1967 M38A1 CDN2
Who is online
Users browsing this forum: No registered users and 36 guests