m38 wiring system

1950 - 1952, M38, questions, discussions, regarding anything related to the M38.
Post Reply
dlshop
G-Private First Class
G-Private First Class
Posts: 7
Joined: Mon Sep 25, 2017 9:05 am
Location:

m38 wiring system

Post by dlshop » Fri Sep 29, 2017 4:52 am

i have an m38 that i traded for. from what information i picked up they all had 24 volt systems and fording kits. mine has 12 volt system and not set up for fording. no top mounted fender light or the holes for them. i admit i am in new territory restoring this great piece of machinery so all the advice i could get is helpful. it is a 1951 m38, mfr. serial no. mc11779, ford stock no. 6795532, ord. serial no. 4756, contract no. w-20-089, mtd. equip. g2740, marine corps 8358318, motor was remanufactured 9-59 ,pod, 804380-w-12-d-p5 in raised letters on the side of the block under distributor. thanks for any help i can get.


Joe Gopan
Jeep Heaven
Posts: 49841
Joined: Sun Mar 02, 2008 12:37 pm
Location: Proving Ground

Re: m38 wiring system

Post by Joe Gopan » Fri Sep 29, 2017 5:09 am

Going to need pics of inner and outer fender, drivers compartment and under hood to help answer your questions.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO

dlshop
G-Private First Class
G-Private First Class
Posts: 7
Joined: Mon Sep 25, 2017 9:05 am
Location:

Re: m38 wiring system

Post by dlshop » Fri Sep 29, 2017 5:41 am

understood. i work all weekend 12 hour shifts and i might not be able to until the first of the week.

Joe Gopan
Jeep Heaven
Posts: 49841
Joined: Sun Mar 02, 2008 12:37 pm
Location: Proving Ground

Re: m38 wiring system

Post by Joe Gopan » Fri Sep 29, 2017 7:34 am

No problem, there are a lot of other minor M-38 details, this is just a start. Got a feeling that your Jeep has alterations by former owners that are typical of what happens to 24 Volt Waterproof Jeeps. It's usually a matter of economics and actual training on M-Series 50's and later MV's.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO

User avatar
dpcd67
G-General
G-General
Posts: 11803
Joined: Mon Jul 25, 2011 3:41 pm
Location: Iowa

Re: m38 wiring system

Post by dpcd67 » Wed Oct 04, 2017 3:19 pm

I would not place a bet on your M38 being anything other than a bubba altered standard m38 with a CJ fender.
U. S. Army 28 years.
Armor Branch

dlshop
G-Private First Class
G-Private First Class
Posts: 7
Joined: Mon Sep 25, 2017 9:05 am
Location:

Re: m38 wiring system

Post by dlshop » Fri Oct 06, 2017 6:29 pm

Image[img]https://i.imgur.co[imImageg]https://i.imgur.com/VegNWKS.jpg[/img]m/zZAVgr7.jpg[/img]Imageimg]Image[img]https://i.Imageimgur.com/ImageVegNWKS.jpg[/img][img]https://i.imgur.[imImageg]https://i.imgur.com/uVZoLLV.jpg[/img]com/6QO8SBy.jpg[/img]ImageImageImageImageur.com/MKxyl9k.jpg[/img]mg]Image[img]https://i.imgurImage.com/mRiZLrG.jpg[/img]Image[img]https://i.imgur.comImage/4sKpzvU.jpg[/img]Image[img]https://i.imgur.cImageom/moXqzSK.jpg[/img]Image a little slow on getting back to you. if it's mechanical, I can fix anything. I leave the computer work to my kids. tag behind passenger seat matches hood numbers. number on data plate is mc11779. seat tag is mc28461. first time I really took a good look at everything and I see no harness to speak of. at one time it was used by a rural fire department. I purchased the m38 book I have been reading about and eagerly await it's arrival. let me know what your thoughts are. good bad or ugly. engine is in my shop along with radiator, flywheel and clutch.

Ken Perkins
G-Major
G-Major
Posts: 861
Joined: Fri Dec 13, 2002 8:26 pm
Location: LIVERMORE, CALIFORNIA

Re: m38 wiring system

Post by Ken Perkins » Sat Oct 07, 2017 1:38 pm

looks to me like a '51 m38 should with a serial number of 28xxx (late june or july). its not a 11779 or any way a ford.
the 804380 block was a replacement to the jeep and why block number starts with R MC and again bored .020
looks like a good tub to start with...
1951 M38 #22936
1951 M100 DUNBAR
1953 M100 DUNBAR
M416B1
2- M762
MVPA #11788
MVCC

dlshop
G-Private First Class
G-Private First Class
Posts: 7
Joined: Mon Sep 25, 2017 9:05 am
Location:

Re: m38 wiring system

Post by dlshop » Sat Oct 07, 2017 4:46 pm

does that mean the dash data tag is not original with the body? looked closer at the motor number on the deck and it is rmc122830.

User avatar
dpcd67
G-General
G-General
Posts: 11803
Joined: Mon Jul 25, 2011 3:41 pm
Location: Iowa

Re: m38 wiring system

Post by dpcd67 » Sat Oct 07, 2017 7:58 pm

Could be either SN. Motor number has no relationship to the jeep as it's a replacement.
You have the two hole wiring harness firewall cover so it is below about 35K.
Your passenger fender is a replacement as it should have a slave receptacle and fording kit loop. Later fenders did not have provision for the slave receptacle.
As for the BO drive light on the drivers side; don't know. Maybe replacement fenders were not drilled for one.
Your Hood numbers are bogus; the Registration number on the hood is never the same as the vehicle serial number so ignore that.
Your tail gate is not drilled for the spare gas can carrier. Looks like the fire department got a lot of surplus parts which which to fix up their free M38. We used to, and still do, give vehicles to local town governments.
I have restored vehicles owned by fire departments before and they are often 12 volt; they did that because they don't want to spend $ for correct bulbs, regulators, waterproof plugs, etc.
Nice condition to start with; mine was ten times worse. 23K, June 51.
U. S. Army 28 years.
Armor Branch

Cuz
G-Lieutenant General
G-Lieutenant General
Posts: 6672
Joined: Fri Feb 23, 2007 10:26 am
Location: Northwestern Wisconsin
Contact:

Re: m38 wiring system

Post by Cuz » Mon Oct 16, 2017 12:06 pm

dlshop,

Visit my M38/M38A1 specific web site for more info. www.willysmjeeps.com
Cuz (AKA Wes K)
45 MB, 51 M38, 54 M37, 6? M101A1, 60 CJ5, 76 DJ5D & 47 T3-C

Joe Gopan
Jeep Heaven
Posts: 49841
Joined: Sun Mar 02, 2008 12:37 pm
Location: Proving Ground

Re: m38 wiring system

Post by Joe Gopan » Tue Oct 17, 2017 2:29 am

I see an M-38 whose owners had better ideas and did what they could to make it run regardless to originality. Note the Steering Wheel Nut, it is WO-801425, installed only M-38's after Serial No. 31337. These had the late nut made for the waterproof rubber horn button. Earlier M-38 used the MB/CJ-2A Nut with the small bakelite button.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO


Post Reply

Return to “M38 Technical Knowledge Base”

Who is online

Users browsing this forum: No registered users and 36 guests