Air Filter
-
- G-Master Sergeant
- Posts: 107
- Joined: Sun May 14, 2017 4:58 am
- Location:
Air Filter
I'm attempting to disassemble the air filter. The air filter unit is removed from the M38. After removing the base plate, I've turned the wing nut(rod) that runs through the filter element until it starts clicking or popping but no more. Must be a secret to disassembling the internals. Please advise. Thanks in advance. Bill
-
- G-Second Lieutenant
- Posts: 532
- Joined: Mon Feb 12, 2007 8:11 am
- Location: Illinois
Re: Air Filter
It's clicking because the threads have disengaged from the nut - just pull the element out. Refer to pg. 61 of ORD 9 SNL G-740, Parts Manual for the M38 - it will show an exploded view of the filter. If your element is gunked up with debris, it might take a good tug. The manual can be found over at www.willysmjeeps.com in the "Downloads" section.
-
- G-Master Sergeant
- Posts: 107
- Joined: Sun May 14, 2017 4:58 am
- Location:
Re: Air Filter
Thanks.
Who is online
Users browsing this forum: No registered users and 51 guests