Is there a difference between a G503 bumperette and an M38/M38a1 bumperette? I picked up a bumperette last Summer at an auction. There were M38 pieces at this auction but no G503s, so I'm wondering if there's a difference.
Sam
M38 bumperette vs. G503 bumperette
-
- G-Major
- Posts: 911
- Joined: Tue Feb 18, 2003 8:11 am
- Location: Ohio
-
- G-Major General
- Posts: 3496
- Joined: Sat Aug 16, 2003 7:55 pm
- Location: Texas
Re: M38 bumperette vs. G503 bumperette
They are the same but on the MB the tab goes up and on the M38 and M38A1 the tab goes down.
-
- G-Major
- Posts: 911
- Joined: Tue Feb 18, 2003 8:11 am
- Location: Ohio
Re: M38 bumperette vs. G503 bumperette
Good enough. Thank you for the reply.
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: M38 bumperette vs. G503 bumperette
Not trying to steal the show, there is a slight non cosmetic difference, G-503 is drilled for 3/8" Bolts, G-740/758 is drilled for 1/2" Bolts. Not sure what repros have, but I used to be able to tell the difference as I could spread the ends apart by hand. Can't do that to the originals.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-Major
- Posts: 911
- Joined: Tue Feb 18, 2003 8:11 am
- Location: Ohio
Re: M38 bumperette vs. G503 bumperette
Not stealing the show at all. Every little bit of information is welcome. I'll have to compare my originals tomorrow and see what I find.
Who is online
Users browsing this forum: No registered users and 38 guests