installing windshield glass
-
- G-Command Sergeant Major
- Posts: 210
- Joined: Tue Jun 13, 2006 2:57 am
- Location: Cary, NC
installing windshield glass
I am getting ready to reinstall the windshield glass. I'm wondering if there are any cons to turning what was once the "inside" to face forward. I'm thinking I will get much clearer wiper action without all the pits and micro scratches. Thoughts?
1952 Willys M38
serial # 68656
serial # 68656
-
- G-Captain
- Posts: 752
- Joined: Fri Mar 03, 2006 7:20 am
- Location: Alvin Texas
- Contact:
Re: installing windshield glass
Don't think it really matters. Should work fine
1943 GPW 103951
1951 M38 27714
1952 M38a1 28888
1969 M274A5
1972 M151A2
1943 MBT
1951 M100
1979 M416
1962 M37B1
1951 M38 27714
1952 M38a1 28888
1969 M274A5
1972 M151A2
1943 MBT
1951 M100
1979 M416
1962 M37B1
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: installing windshield glass
I would leave the weathered side out, there will only be one distorted surface to look thru.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-First Sergeant
- Posts: 140
- Joined: Mon Mar 07, 2011 3:56 am
- Location:
Re: installing windshield glass
I just had a new glass cut,at local glass shop, cost me $90.00, dont really know if thats a good price or not. Mine was cracked. I just use RAIN-X on my jeep windshields, works better than wipers
1951 M38 plus 4
The good thing about having alot of old jeeps is,it makes it more difficult for your wife to tell when you bring another one home.
The good thing about having alot of old jeeps is,it makes it more difficult for your wife to tell when you bring another one home.
-
- G-Command Sergeant Major
- Posts: 210
- Joined: Tue Jun 13, 2006 2:57 am
- Location: Cary, NC
Re: installing windshield glass
Makes sense to face the pitted side forward. Over time the glass would eventually be pitted on both sides. The Rain-x sounds good as well. I have a friend who swears by the stuff, especially on a vertical windshield. Another question. I fitted the new seal to the frame and trimmed it so the ends fit nice and snug but when I then installed it on the glass the ends overlapped by 1 1/4". I figure that is to allow a little wiggle room for installation and is not unusual. That sound right??
1952 Willys M38
serial # 68656
serial # 68656
-
- G-Command Sergeant Major
- Posts: 210
- Joined: Tue Jun 13, 2006 2:57 am
- Location: Cary, NC
Re: installing windshield glass
Should I fit the gasket snug around the windshield glass or snug against the frame? Seems like if it is tight to the frame opening it would be much more difficult to pull the rubber over the edge.
1952 Willys M38
serial # 68656
serial # 68656
-
- G-Captain
- Posts: 752
- Joined: Fri Mar 03, 2006 7:20 am
- Location: Alvin Texas
- Contact:
Re: installing windshield glass
Ninety bucks is a good price. I was quoated 140.00 which is a rip. Still looking for a better price.
1943 GPW 103951
1951 M38 27714
1952 M38a1 28888
1969 M274A5
1972 M151A2
1943 MBT
1951 M100
1979 M416
1962 M37B1
1951 M38 27714
1952 M38a1 28888
1969 M274A5
1972 M151A2
1943 MBT
1951 M100
1979 M416
1962 M37B1
-
- G-Command Sergeant Major
- Posts: 210
- Joined: Tue Jun 13, 2006 2:57 am
- Location: Cary, NC
Re: installing windshield glass
Wow. Just got finished installing the glass. 3+ hours of torment. I split the difference in the rubber overlap and ended up making a tool to get the locking strip installed. Installing that long skinny piece of rubber was undoubtedly the hardest part of the whole project. Glad it is done. Never again.
1952 Willys M38
serial # 68656
serial # 68656
- F Bill
- G-Colonel
- Posts: 1702
- Joined: Sat Dec 14, 2002 5:59 pm
- Location: no longer on the road, USA formerly Central TX based. Now NY Capital District
Re: installing windshield glass
There IS a tool for that locking strip. Seems like everyone tries to install it without the tool and has a heck of a time, the tool makes it pretty simple. Just google windshield locking strip installation tool and you should find several. It is a common proplem posted over on the 3A page as well as posts asking which way the rubber goes in (originally with the strip on the inside according to factory photos, on the 3A) and the occasional post about how it was far easier to write a check to a pro to install the glass..
F Bill-no longer chasing oversize loads out west, I'm in NY now.
Certified jeep Addict in recovery
Certified jeep Addict in recovery
-
- G-Command Sergeant Major
- Posts: 210
- Joined: Tue Jun 13, 2006 2:57 am
- Location: Cary, NC
Re: installing windshield glass
Yeah. I went on line and found the tool, ordered it, and then found a youtube video on how to install the strip. Being impatient, that's when I decided I could make my own. The homemade tool worked well enough and when the real tool shows up I will keep it for the glass on the hardtop and then donate it to my son's toolbox.
1952 Willys M38
serial # 68656
serial # 68656
-
- G-First Sergeant
- Posts: 140
- Joined: Mon Mar 07, 2011 3:56 am
- Location:
Re: installing windshield glass
Well I just cussed for an hour, and didnt even make it to the locking strip, I will be taking my new glass and seal to a pro tomorrow
1951 M38 plus 4
The good thing about having alot of old jeeps is,it makes it more difficult for your wife to tell when you bring another one home.
The good thing about having alot of old jeeps is,it makes it more difficult for your wife to tell when you bring another one home.
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: installing windshield glass
Locking Strip Inside.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
- dpcd67
- G-General
- Posts: 11818
- Joined: Mon Jul 25, 2011 3:41 pm
- Location: Iowa
Re: installing windshield glass
I see and like inside, WHY is everyone else saying outside is the only way they have ever seen it when all the pictures I see are definitely inside?
U. S. Army 28 years.
Armor Branch
Armor Branch
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: installing windshield glass
Educated guesses,maybe. Some are observing and have a long Jeep history.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-Major General
- Posts: 3497
- Joined: Sat Aug 16, 2003 7:55 pm
- Location: Texas
Re: installing windshield glass
You will see some on the outside because it is easier to install than the correct way inside.The inserts were installed at the factory on the inside with the windshield folded down.The glass company who cut my M38 windshield and installed it told me the insert always goes on the inside.He said they are easier to put in on the outside but that is not the correct way.
Who is online
Users browsing this forum: No registered users and 5 guests