Page 1 of 1

Help with HMMWV Roof setup

Posted: Tue Sep 26, 2017 6:11 am
by ltrpd
What is the best Hard roof setup for my HMMWV. I would like to set it up as an m1151 or m1165. Thanks,

Re: Help with HMMWV Roof setup

Posted: Wed Sep 27, 2017 6:57 am
by 86humv
Parts for both are in tm9-2320-387-24p c05

Re: Help with HMMWV Roof setup

Posted: Wed Sep 27, 2017 10:25 am
by ltrpd
Thanks for the response, Where is the best supplier to source the roof. thanks,

Re: Help with HMMWV Roof setup

Posted: Wed Sep 27, 2017 3:24 pm
by Urban Camo
Probably this board or the Steel soldiers board or Ebay.
Most likely you will end up talking to the guy that just replied to you before me.

Re: Help with HMMWV Roof setup

Posted: Wed Sep 27, 2017 7:20 pm
by 86humv
LIBBSTER29 in MD has one in FS section

Re: Help with HMMWV Roof setup

Posted: Fri Sep 29, 2017 1:37 pm
by jake-cutter
For a roof I would ask the following members:

86humv
LIBBSTER29
Lawdog734
and then Ebay

Might have to piece it together using all of the above. But to me a hard top is worth the expense, more of a buy once type thing.

Re: Help with HMMWV Roof setup

Posted: Fri Dec 01, 2017 3:37 am
by blhar15
The M1151 is the aluminum roof and harder to come by. The part number is 6015079 NSN 01-547-9739

You could also always order a new one from one of the AM General suppliers, but very expensive

Re: Help with HMMWV Roof setup

Posted: Fri Dec 01, 2017 10:27 am
by 86humv
I have the turrets for the alum. roofs...mechanical or electric available.

Re: Help with HMMWV Roof setup

Posted: Tue Nov 13, 2018 8:48 am
by Polarbear
Any body knows if "Tight" soft tops are made by anyone? All I see kind of loose and sagging too much. Looks awful, plus contributes to deterioration due to paddles forming on top...
Anyone makes canvas tops?